Spain

FUNDACIÓN IDONIAL

Parque Científico Tecnológico de Gijón, zona INTRA. Edificio Antiguo Secadero de Tabacos. Avda. Jardín Botánico, 1345, 33203, Gijón, Spain

ENAC|60/LE154ISO/IEC 17025Register refreshed 2026-10-10

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open ENAC register entry

Work at FUNDACIÓN IDONIAL?

Claim this profile to keep it accurate.

Register record

ENACRefreshed 2026-10-10: 60/LE154Active

Accredited standards

Our reading of the ENAC scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

As written on the certificate · Line 3 (ENAC 60/LE154)

UNE-EN ISO 15350 A; UNE-EN 10276-2 A; UNE-EN ISO 15351 A; UNE 7364 A; ASTM E340 A; ASTM E8/8M A; UNE-EN ISO 6892-1 A; UNE-EN ISO 6892-2 A; ASTM E21 A; ASTM E290 A; UNE-EN ISO 7438 A; ASTM E23 A; UNE-EN ISO 148-1 A; UNE-EN ISO 6506-1 A; ASTM E10 A; UNE-EN ISO 6507-1 A; ASTM E384 A; ASTM E92 A

As written on the certificate · Line 5 (ENAC 60/LE154)

ASTM E647; ISO 12108; UNE-EN 13674-1; UNE-EN ISO 17639; ASME IX QW-183, QW-184, QW-470; UNE-EN ISO 4136; UNE-EN ISO 5178; ASME IX QW-150; ASTM E8/8M; UNE-EN ISO 6892-1; UNE-EN ISO 5173; ASME IX QW-160; UNE-EN ISO 9016; ASME IX QW-170; ASME VIII Div 1 UG-84; ASTM E23; UNE-EN ISO 148-1; UNE-EN ISO 9015-1; UNE-EN ISO 6506-1; ASTM E10; UNE-EN ISO 6507-1; ASTM E384; ASTM E92

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 898-2Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 1099Metallic materials - Fatigue testing - Axial force-controlled method

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ISO 1893Refractory products - Determination of refractoriness under load - Differential method with rising temperature

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

ISO 3506-1Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 5173Destructive tests on welds in metallic materials - Bend tests

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

As written on the certificate · Line 7 (ENAC 60/LE154)

UNE 36420; UNE-EN ISO 6892-1; ASTM E415; ASTM E1086

ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature

As written on the certificate · Line 3 (ENAC 60/LE154)

ISO 7438Metallic materials - Bend test

As written on the certificate · Line 3 (ENAC 60/LE154)

ISO 8894-2Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire method (parallel)

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

ISO 8895Shaped insulating refractory products - Determination of cold crushing strength

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 10059-1Dense shaped refractory products - Determination of cold compressive strength - Part 1: Referee test without packing

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

ISO 12108Metallic materials - Fatigue testing - Fatigue crack growth method

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 12135Metallic materials - Unified method of test for the determination of quasistatic fracture toughness

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ISO 12677Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

As written on the certificate · Line 10 (ENAC 60/LE154)

UNE-EN ISO 12677

As written on the certificate · Line 11 (ENAC 60/LE154)

UNE-EN ISO 12677

As written on the certificate · Line 12 (ENAC 60/LE154)

UNE-EN ISO 12677

ISO 15350Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)

As written on the certificate · Line 1 (ENAC 60/LE154)

UNE-EN ISO 15350 A; UNE-EN ISO/IEC 17025:2017

As written on the certificate · Line 3 (ENAC 60/LE154)

ISO 15351Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)

As written on the certificate · Line 3 (ENAC 60/LE154)

ISO 15653Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds

As written on the certificate · Line 5 (ENAC 60/LE154)

ISO 21587-3Name not checked yet

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

ISO 26845Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

ASTM

ASTM C133Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

ASTM C134Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

ASTM C583Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

ASTM C704Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

As written on the certificate · Line 3 (ENAC 60/LE154)

ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ASTM E290Standard Test Methods for Bend Testing of Material for Ductility

As written on the certificate · Line 3 (ENAC 60/LE154)

ASTM E340Standard Practice for Macroetching Metals and Alloys

As written on the certificate · Line 3 (ENAC 60/LE154)

ASTM E384Standard Test Method for Microindentation Hardness of Materials

As written on the certificate · Line 3 (ENAC 60/LE154)

As written on the certificate · Line 5 (ENAC 60/LE154)

As written on the certificate · Line 6 (ENAC 60/LE154)

UNE-EN ISO 898-1; UNE-EN ISO 3506-1; UNE-EN ISO 6892-1; UNE-EN ISO 148-1; UNE-EN ISO 6506-1; UNE-EN ISO 6507-1; ASTM E384; ASTM E92; UNE-EN ISO 6508-1; UNE-EN ISO 898-2

ASTM E399Name not checked yet

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

As written on the certificate · Line 2 (ENAC 60/LE154)

ASTM E415; ASTM E1086

As written on the certificate · Line 7 (ENAC 60/LE154)

UNE 36420; UNE-EN ISO 6892-1; ASTM E415; ASTM E1086

ASTM E466Name not checked yet

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ASTM E606Name not checked yet

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

ASTM E647Name not checked yet

As written on the certificate · Line 5 (ENAC 60/LE154)

ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

As written on the certificate · Line 2 (ENAC 60/LE154)

ASTM E415; ASTM E1086

As written on the certificate · Line 7 (ENAC 60/LE154)

UNE 36420; UNE-EN ISO 6892-1; ASTM E415; ASTM E1086

ASTM E1820Name not checked yet

As written on the certificate · Line 4 (ENAC 60/LE154)

UNE-EN ISO 6508-1; ASTM E18; ASTM E466; ISO 1099; ASTM E606/606M; ASTM E399; ASTM E1820; ISO 12135; UNE-EN ISO 15653

EN 993 series

EN 993-1Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

EN 993-5Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

EN 993-6Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

EN 993-7Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

EN 993-9Name not checked yet

As written on the certificate · Line 8 (ENAC 60/LE154)

UNE-EN ISO 10059-1; UNE-EN 993-5:2018; ASTM C133; UNE-EN 993-6; UNE-EN 993-7; ASTM C583; UNE-EN 993-1; ASTM C134; UNE-EN ISO 1893; UNE-EN 993-9; ASTM C704-07/C704M-09e1; UNE-EN ISO 8895

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

EN 993-15Name not checked yet

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

EN

EN 1094-4Name not checked yet

As written on the certificate · Line 9 (ENAC 60/LE154)

UNE-EN 1094-4; ASTM C134 B; UNE-EN ISO 1893 B; UNE-EN 993-9 B; UNE-EN ISO 8894-2; UNE-EN 993-15:2005 B; EN ISO 26845 B; UNE-EN ISO 21587-3 B; UNE-EN ISO 12677 B

EN 10276-2Name not checked yet

As written on the certificate · Line 3 (ENAC 60/LE154)

EN 13674-1Name not checked yet

As written on the certificate · Line 5 (ENAC 60/LE154)

Scope as published by ENAC

12 lines

ENAC

ISO/IEC 17025

Active

60/LE154

View scope

Location

Parque Científico Tecnológico de Gijón, zona INTRA. Edificio Antiguo Secadero de Tabacos. Avda. Jardín Botánico, 1345, Gijón, 33203, ES

43.54494, -5.66275

Open in Maps

← All accredited testing labs in Spain

Labs with overlapping accredited scope in Spain

Accreditation data refreshed from the ENAC register on 2026-10-10.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ENAC entry linked above.