Spain

TITANIA, ENSAYOS Y PROYECTOS INDUSTRIALES

Parque Tecnológico TecnoBahía. Carretera de Sanlucar (A-2001), Km 7,5. Edificio RETSE. Nave 4, 11500, Puerto de Santa María, Spain

ENAC|924/LE1908ISO/IEC 17025Register refreshed 2026-10-10

Certificates

Scope items

Standards

114

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

No contact information available

Open ENAC register entry

Work at TITANIA, ENSAYOS Y PROYECTOS INDUSTRIALES?

Claim this profile to keep it accurate.

Register record

ENACRefreshed 2026-10-10: 924/LE1908Active

Accredited standards

114

Our reading of the ENAC scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)

As written on the certificate · Line 2 (ENAC 924/LE1908)

AITM 2-0034; MIL-PRF-81733; AITM 3-0025; AITM 2-0013; BSS 7257; Bombardier BATS 3488; AS 5127/1; DIN 65262-1; ASTM D2240; ISO 868; ISO 48-4; ISO 7619-1; AITM 1-0033; Bombardier BATS 4315; BMS5-95; ISO 2781; AITM 1-0036; UNE-EN 542; ISO 2555; ISO 3251

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

As written on the certificate · Line 13 (ENAC 924/LE1908)

UNE-EN 2243-3; UNE-EN 2667-2; ASTM E18; ISO 6508-1; ASTM E384; ASTM E92; ISO 6507-1; ASTM E10; ISO 6506-1; ASTM E112; ASTM E8/E8M; ISO 6892-1; ASTM F2111; ASTM B137; ISO 2106; ASTM E23; ISO 148-1; ASTM E290

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E1004; UNE-EN 2004-1; MIL-STD-1537; AITM 6-6004; ASTM B557; ASTM B557M; EN 2002-001; ASTM E8/E8M; UNE-EN ISO 6892-1; ISO 6892-1; ASTM E18; ISO 6508-1; ASTM E384; ASTM E92; ISO 6507-1; ISO 9015-1; ISO 9015-2; ASTM E10; ISO 6506-1; ASTM E23; ASME BPVC IX; ISO 148-1; ISO15614-1; ASTM E 190; ISO 5173; UNE 7364; ISO 17639; ISO 4136

ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

ISO 604Plastics - Determination of compressive properties

As written on the certificate · Line 3 (ENAC 924/LE1908)

ASTM D2369 A; ISO 604 A; ASTM D2240 A; ASTM D1622-D1622M A; ISO 12058-1 A; T&L-PE-047; AITM 1-0033; Bombardier BATS 4315; BMS5-95; AS 5127/1 A; ISO 2811-1; ASTM D1475 A; ISO 3251 A; ASTM D2369 A; ISO 2431 A; ASTM D1200 A

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

As written on the certificate · Line 2 (ENAC 924/LE1908)

ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

ISO 1513Paints and varnishes - Examination and preparation of test samples

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

ISO 1518-1Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method

As written on the certificate · Line 4 (ENAC 924/LE1908)

ASTM D4212; ISO 9117-3; ISO 2812-1; ISO 2812-2; ASTM D3359 Method B; ISO 2409; ISO 1518-1; ISO 1519; ISO 6860; FED-STD-141 I+D-E 103; ASTM D3359 Method A; MIL-PRF-23377; MIL-PRF-85285; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ISO 2813

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 2106Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method

As written on the certificate · Line 13 (ENAC 924/LE1908)

ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

ISO 2409Paints and varnishes - Cross-cut test

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 2431Paints and varnishes - Determination of flow time by use of flow cups

As written on the certificate · Line 3 (ENAC 924/LE1908)

ISO 2555Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method

As written on the certificate · Line 2 (ENAC 924/LE1908)

ISO 2781Rubber, vulcanized or thermoplastic - Determination of density

As written on the certificate · Line 2 (ENAC 924/LE1908)

ISO 2808Paints and varnishes - Determination of film thickness

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method

As written on the certificate · Line 3 (ENAC 924/LE1908)

ISO 2812-1Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 2812-2Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 3251Paints, varnishes and plastics - Determination of non-volatile-matter content

As written on the certificate · Line 2 (ENAC 924/LE1908)

As written on the certificate · Line 3 (ENAC 924/LE1908)

ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 4892-1Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance and requirements

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 4892-3Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 5173Destructive tests on welds in metallic materials - Bend tests

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 6272Paints and varnishes - Falling-weight test

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 6860Paints and varnishes - Bend test (conical mandrel)

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 7619-1Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

As written on the certificate · Line 2 (ENAC 924/LE1908)

ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 9015-2Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

As written on the certificate · Line 14 (ENAC 924/LE1908)

ASTM B117; ISO 9227; T&L-PE-001; Bombardier BATS 2520; BAC5602; NE 40-002; I+D-P-220; SAE AMS 2772; T&L-PE-002; Bombardier BATS 2521; BAC5602; NE 40-002; I+D-P-220; SAE AMS 2772; T&L-PE-003; Bombardier BATS 2522; Bombardier BATS 2463; UNE-EN 2004-5; NE 40-002; I+D-P-220; AIMS 03-04-000; UNE-EN 2004-5; T&L-PE-022; Bombardier BATS 2525; EN 2716; NE 40-002; AIMS 03-04-000; SAE AMS 2772; ASTM G110; ASTM G34

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

ISO 11890-1Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

ISO 12058-1Name not checked yet

As written on the certificate · Line 3 (ENAC 924/LE1908)

ISO 14126Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

ISO 14129Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

ISO 14130Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

ISO 15614-1Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys

As written on the certificate · Line 15 (ENAC 924/LE1908)

ISO 16474-1Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM

ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

As written on the certificate · Line 14 (ENAC 924/LE1908)

ASTM B137Name not checked yet

As written on the certificate · Line 13 (ENAC 924/LE1908)

ASTM B557Name not checked yet

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM C365Name not checked yet

As written on the certificate · Line 12 (ENAC 924/LE1908)

AITM 1-0010; UNE-EN 2564; AITM 1-0003; AITM 1-0025; AITM 1-0053; AITM 1-0005; AITM 1-0019; ASTM C365; UNE-EN 2243-1; UNE-EN 2243-2

ASTM D1200Name not checked yet

As written on the certificate · Line 3 (ENAC 924/LE1908)

ASTM D1353Name not checked yet

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

ASTM D1475Name not checked yet

As written on the certificate · Line 3 (ENAC 924/LE1908)

ASTM D1622Name not checked yet

As written on the certificate · Line 3 (ENAC 924/LE1908)

ASTM D1640Name not checked yet

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

ASTM D2197Name not checked yet

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

As written on the certificate · Line 2 (ENAC 924/LE1908)

As written on the certificate · Line 3 (ENAC 924/LE1908)

ASTM D2369Name not checked yet

As written on the certificate · Line 3 (ENAC 924/LE1908)

ASTM D2794Name not checked yet

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

ASTM D3359Name not checked yet

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ASTM D3363Name not checked yet

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

ASTM D3518Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

ASTM D3960Name not checked yet

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

ASTM D4212Name not checked yet

As written on the certificate · Line 4 (ENAC 924/LE1908)

ASTM D5402Name not checked yet

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

ASTM D6905Name not checked yet

As written on the certificate · Line 6 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ASTM D5402 Method A; AITM 2-0031; ASTM D2794; ASTM D6905; MIL-PRF-23377; MIL-PRF-85285; TT-P-2760; ISO 6272; ASTM D3363; ASTM D2197

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E112Standard Test Methods for Determining Average Grain Size

As written on the certificate · Line 13 (ENAC 924/LE1908)

ASTM E190Name not checked yet

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E290Standard Test Methods for Bend Testing of Material for Ductility

As written on the certificate · Line 13 (ENAC 924/LE1908)

ASTM E384Standard Test Method for Microindentation Hardness of Materials

As written on the certificate · Line 13 (ENAC 924/LE1908)

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E1004Name not checked yet

As written on the certificate · Line 15 (ENAC 924/LE1908)

ASTM E1012Name not checked yet

As written on the certificate · Line 16 (ENAC 924/LE1908)

ASTM E1012

ASTM F2111Name not checked yet

As written on the certificate · Line 13 (ENAC 924/LE1908)

ASTM G34Name not checked yet

As written on the certificate · Line 14 (ENAC 924/LE1908)

ASTM G110Name not checked yet

As written on the certificate · Line 14 (ENAC 924/LE1908)

ASTM G154Name not checked yet

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

EN

EN 542Name not checked yet

As written on the certificate · Line 2 (ENAC 924/LE1908)

EN 2002-001Name not checked yet

As written on the certificate · Line 15 (ENAC 924/LE1908)

EN 2004-1Name not checked yet

As written on the certificate · Line 15 (ENAC 924/LE1908)

EN 2004-5Name not checked yet

As written on the certificate · Line 14 (ENAC 924/LE1908)

EN 2329Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2330Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

EN 2331Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

EN 2332Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2377Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2557Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2558Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

EN 2559Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

EN 2560Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2561Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2563Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2564Name not checked yet

As written on the certificate · Line 12 (ENAC 924/LE1908)

AITM 1-0010; UNE-EN 2564; AITM 1-0003; AITM 1-0025; AITM 1-0053; AITM 1-0005; AITM 1-0019; ASTM C365; UNE-EN 2243-1; UNE-EN 2243-2

EN 2597Name not checked yet

As written on the certificate · Line 10 (ENAC 924/LE1908)

ISO 2812-2; UNE-EN 2561; UNE-EN 2597; ISO 527-4; ISO 527-5; UNE-EN 2563; UNE-EN 2377; ISO 14130; UNE-EN 2560; UNE-EN 2332; UNE-EN 2557; UNE-EN 2329; AITM 3-0002; ISO 11357-2

EN 2667-2Name not checked yet

As written on the certificate · Line 13 (ENAC 924/LE1908)

EN 2716Name not checked yet

As written on the certificate · Line 14 (ENAC 924/LE1908)

EN 2823Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

EN 2850Name not checked yet

As written on the certificate · Line 11 (ENAC 924/LE1908)

AITM 3-0008 A; UNE-EN 2850; ISO 14126; AITM 3-0003; AITM 3-0004 A; UNE-EN 2558; UNE-EN 2330; UNE-EN 2823 A; UNE-EN 2559; UNE-EN 2331; ASTM D3518/3518M; ISO 14129

EN 3665Name not checked yet

As written on the certificate · Line 7 (ENAC 924/LE1908)

UNE-EN 3665; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 1513; FED-STD-141 METHOD 4331; SAE AMS 3095; ISO 11890-1

As written on the certificate · Line 9 (ENAC 924/LE1908)

ISO 4628-1; ISO 4628-2; ISO 1518-1; UNE-EN 3665; ASTM B117; ISO 9227; SAE AMS 3095; ASTM G154; ISO 16474-1; ISO 16474-3; ISO 4892-1; ISO 4892-3; ISO 2812-1

EN 2243 series

EN 2243-1Name not checked yet

As written on the certificate · Line 12 (ENAC 924/LE1908)

AITM 1-0010; UNE-EN 2564; AITM 1-0003; AITM 1-0025; AITM 1-0053; AITM 1-0005; AITM 1-0019; ASTM C365; UNE-EN 2243-1; UNE-EN 2243-2

EN 2243-2Name not checked yet

As written on the certificate · Line 12 (ENAC 924/LE1908)

AITM 1-0010; UNE-EN 2564; AITM 1-0003; AITM 1-0025; AITM 1-0053; AITM 1-0005; AITM 1-0019; ASTM C365; UNE-EN 2243-1; UNE-EN 2243-2

EN 2243-3Name not checked yet

As written on the certificate · Line 13 (ENAC 924/LE1908)

ISO 7724 series

ISO 7724-1Paints and varnishes - Colorimetry - Part 1: Principles

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 7724-2Paints and varnishes - Colorimetry - Part 2: Colour measurement

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 7724-3Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 9117 series

ISO 9117-1Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 9117-3Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini

As written on the certificate · Line 4 (ENAC 924/LE1908)

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519

ISO 9117-6Name not checked yet

As written on the certificate · Line 5 (ENAC 924/LE1908)

ISO 2808; ISO 2360; ISO 1463; ASTM D1353; ASTM D3960; ISO 11890-1; ASTM D1640 / D1640M; FED-STD-141 METHOD 4061.3; ISO 9117-1; ISO 9117-6

As written on the certificate · Line 8 (ENAC 924/LE1908)

ISO 9117-3; ISO 9117-6; ISO 9117-1; ISO 2813; AITM 2-0027; ISO 7724-1; ISO 7724-2; ISO 7724-3; ASTM D3359 Method B; ISO 2409; ISO 6272; ISO 6860; ISO 1519