Precision Measurements and Instruments Corporation
3665 SW Deschutes Street, 97333-9285, Corvallis, OR, United States
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at Precision Measurements and Instruments Corporation?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 7880.01Active
- 7880.02Active
Accredited standards
We have not yet extracted the standard numbers from this lab’s scope document. The scope text we hold is below.
Scope as published by A2LA
6 lines
ISO/IEC 17025
Active7880.01
The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-08-05. Check the A2LA register for the current scope.
Accredited scope, certificate 7880.01
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 3
(A2LA Cert. No. 7880.01) 05/28/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PECISION MEASUREMENTS AND INSTRUMENTS CORPORATION 3665 Southwest Deschutes Street Corvallis, OR 97333 Linda Engelbrecht Phone: (541) 753-0607 Email: lindaengelbrecht@pmiclab.com MECHANICAL Valid To: September 30, 2026 Certificate Number: 7880.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following engineering tests: Test Test Method Standard Test Method for Resistivity of Electrical Conductor Materials ASTM B193 Standard test method for density of powder metallurgy (PM) materials containing less than two percent porosity ASTM B311 Standard test methods for tension testing wrought and cast aluminum- and magnesium-alloy products ASTM B557 Standard test method for measuring compressive properties of thermal insulations ASTM C165 Standard test methods for thickness and density of blanket or batt thermal insulations ASTM C167 Standard test method for density of sandwich core materials ASTM C271 Standard test method for water absorption of core materials for sandwich constructions ASTM C272 Standard test method for flatwise tensile strength of sandwich constructions ASTM C297/C297M Standard test method for dimensions and density of preformed block and board–type thermal insulation ASTM C303 Standard test method for linear shrinkage of preformed high-temperature thermal insulation subjected to soaking heat ASTM C356 Standard test methods for density of granular loose fill insulations ASTM C520 Standard test method for flexural strength of advanced ceramics at ambient temperature ASTM C1161
Part 2 of 3
(A2LA Cert. No. 7880.01) 05/28/2026 Page 2 of 2 Test Test Method Standard test methods for dc resistance or conductance of insulating materials ASTM D257 Standard test method for water absorption of plastics ASTM D570 Standard test method for tensile properties of plastics ASTM D638 Standard test method for compressive properties of rigid plastics ASTM D695 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D790 Standard test methods for density and specific gravity (relative density) of plastics by displacement ASTM D792 Standard test method for tensile properties of thin plastic sheeting ASTM D882 Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal) ASTM D1002 Standard test method for compressive properties of rigid cellular plastics ASTM D1621 Standard test method for apparent density of rigid cellular plastics ASTM D1622 Standard test method for tensile and tensile adhesion properties of rigid cellular plastics ASTM D1623 Standard test method for response of rigid cellular plastics to thermal and humid aging ASTM D2126 Standard test method for tensile properties of polymer matrix composite materials ASTM D3039/D3039M Standard test method for determining strength of adhesively bonded rigid plastic lap-shear joints in shear by tension loading ASTM D3163 Standard test method for in-plane shear strength of reinforced plastics ASTM D3846 Standard test method for breaking force and elongation of textile fabrics (strip method) ASTM D5035 Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials ASTM D5229/D 5229M Standard test methods for physical dimensions of solid plastics specimens ASTM D5947 Standard practice for maintaining constant relative humidity by means of aqueous solutions ASTM E104
Part 3 of 3
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited PRECISION MEASUREMENTS AND INSTRUMENTS CORPORATION Corvallis, OR for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 28th day of May 2026. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 7880.01 Valid to September 30, 2026
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
ISO/IEC 17025
Active7880.02
The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-08-05. Check the A2LA register for the current scope.
Accredited scope, certificate 7880.02
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 3
(A2LA Cert. No. 7880.01) 05/28/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PECISION MEASUREMENTS AND INSTRUMENTS CORPORATION 3665 Southwest Deschutes Street Corvallis, OR 97333 Linda Engelbrecht Phone: (541) 753-0607 Email: lindaengelbrecht@pmiclab.com MECHANICAL Valid To: September 30, 2026 Certificate Number: 7880.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following engineering tests: Test Test Method Standard Test Method for Resistivity of Electrical Conductor Materials ASTM B193 Standard test method for density of powder metallurgy (PM) materials containing less than two percent porosity ASTM B311 Standard test methods for tension testing wrought and cast aluminum- and magnesium-alloy products ASTM B557 Standard test method for measuring compressive properties of thermal insulations ASTM C165 Standard test methods for thickness and density of blanket or batt thermal insulations ASTM C167 Standard test method for density of sandwich core materials ASTM C271 Standard test method for water absorption of core materials for sandwich constructions ASTM C272 Standard test method for flatwise tensile strength of sandwich constructions ASTM C297/C297M Standard test method for dimensions and density of preformed block and board–type thermal insulation ASTM C303 Standard test method for linear shrinkage of preformed high-temperature thermal insulation subjected to soaking heat ASTM C356 Standard test methods for density of granular loose fill insulations ASTM C520 Standard test method for flexural strength of advanced ceramics at ambient temperature ASTM C1161
Part 2 of 3
(A2LA Cert. No. 7880.01) 05/28/2026 Page 2 of 2 Test Test Method Standard test methods for dc resistance or conductance of insulating materials ASTM D257 Standard test method for water absorption of plastics ASTM D570 Standard test method for tensile properties of plastics ASTM D638 Standard test method for compressive properties of rigid plastics ASTM D695 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D790 Standard test methods for density and specific gravity (relative density) of plastics by displacement ASTM D792 Standard test method for tensile properties of thin plastic sheeting ASTM D882 Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal) ASTM D1002 Standard test method for compressive properties of rigid cellular plastics ASTM D1621 Standard test method for apparent density of rigid cellular plastics ASTM D1622 Standard test method for tensile and tensile adhesion properties of rigid cellular plastics ASTM D1623 Standard test method for response of rigid cellular plastics to thermal and humid aging ASTM D2126 Standard test method for tensile properties of polymer matrix composite materials ASTM D3039/D3039M Standard test method for determining strength of adhesively bonded rigid plastic lap-shear joints in shear by tension loading ASTM D3163 Standard test method for in-plane shear strength of reinforced plastics ASTM D3846 Standard test method for breaking force and elongation of textile fabrics (strip method) ASTM D5035 Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials ASTM D5229/D 5229M Standard test methods for physical dimensions of solid plastics specimens ASTM D5947 Standard practice for maintaining constant relative humidity by means of aqueous solutions ASTM E104
Part 3 of 3
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited PRECISION MEASUREMENTS AND INSTRUMENTS CORPORATION Corvallis, OR for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 28th day of May 2026. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 7880.01 Valid to September 30, 2026
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
Location
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.