AGROLAB Wasseranalytik
Eching am Ammersee, DE
Parameter Verfahren Abw St Ofw St Grw St Benzol und Derivate (BTEX) DIN 38407-F 9: 1991-05* DIN 38407-F 43: 2014-10 E E DIN EN ISO 15680: 2004-04 (F 19) DIN EN ISO 17943: 2016-11 (F 41)
30 laboratories in Germany are accredited by DAKKS under ISO/IEC 17025 to perform DIN 38407-F3 testing. These labs commonly handle Effluent, Water matrices. Most frequently tested analytes via this method in Germany: Polychlorinated Biphenyls (Pcb). Accredited providers include AGROLAB Wasseranalytik, AGROLAB Potsdam, Bergische Wasser- und Umweltlabor, Labor Dr. Scheller, Maul + Partner Baugrund-Ingenieurbüro GmbH BEGA.tec Labor für Umweltanalytik.
Eching am Ammersee, DE
Parameter Verfahren Abw St Ofw St Grw St Benzol und Derivate (BTEX) DIN 38407-F 9: 1991-05* DIN 38407-F 43: 2014-10 E E DIN EN ISO 15680: 2004-04 (F 19) DIN EN ISO 17943: 2016-11 (F 41)
Potsdam, DE
Parameter Verfahren Abw Ofw Grw Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997-02 (F 1)* DIN 38407-F 3: 1998-07 DIN 38407-F 37: 2013-11 Mono-, Dichlorbenzole DIN EN ISO 15680: 2004-04 (F 19) DIN 38407-F 43: 2014-10
Wuppertal, DE
DIN EN ISO 17294-2 (E 29) 2017-01 Wasserbeschaffenheit - Anwendung der induktiv gekoppelten Plasma-Massenspektrometrie (ICP-MS) - Teil 2: Bestimmung von ausgewählten Elementen einschließlich Uran-Isotope (Modifizierung: zusätzlich ana
Augsburg, DE
An lage zur Teil-Akkreclitierungsurkunde D-PL-19230-01-02 DAkkS Deutsche Akkrediberungsstelle Parameter Verfahren Abw Ofw Grw Gesamter gebundener Stickstoff (TNb) DIN EN 12260: 2003-12 (H 34) DIN EN ISO 11905-1: 1998-08 (H 36) Adsorbierbare
Berlin, DE
DIN EN ISO 11885 (E 22) 2009-09 Wasserbeschaffenheit - Bestimmung von ausgewählten Elementen durch induktiv gekoppelte Plasma-Atom-Emissionsspektrometrie (ICP-OES) 1.5 Gemeinsam erfassbare Stoffe DIN EN ISO 6468 (F 1) 1997-02
Hamburg, DE
Parameter Verfahren Abw Ofw Grw Benzol und Derivate ( BTEX) DIN 38407 -F 9: 1991 -05* DIN 38407 -F 43: 2014 -10 DIN EN ISO 15680: 2004 -04 (F 19) DIN EN ISO 17943: 2016 -11 (F 41) Organochlor -Insektizide ( OCP)
Berlin, DE
Deutsche Akkreditierungsstelle Parameter Verfahren Abw Ofw Grw St Organochlor-Insektizide (OCP) DIN EN ISO 6468: 1997-02 (F 1)* DIN 38407-F 37: 2013-11 DIN EN 16693: 2015-12 (F 51) Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997-02 (F
Bensheim, DE
DIN EN ISO 11885 (E 22) 2009-09 Wasserbeschaffenheit - Bestimmung von ausgewählten Elementen durch induktiv gekoppelte Plasma-Atom-Emissionsspektrometrie (ICP-OES) DIN EN ISO 17294 -2 (E 29) 2024-12 Wasserbeschaffenheit - Anwen
Münster, DE
Innerhalb der mit ** gekennzeichneten Prüfbereiche ist dem Prüflaboratorium, ohne dass es einer vorherigen Information und Zustimmung der DAkkS bedarf, die Modifizierung sowie Weiter- und Neuentwicklung von Prüfverfahren gestattet. Die au
Hamburg, DE
PI -MA -M 02 -007 2022-03 Hausverfahren: Bestimmung von Arzneimittelwirkstoffen und anderen organischen Verbindungen in Wasser und Boden mittels LC-MS/MS PI PI -MA -M 02 -008 2019-09 Hausverfahren: Bestimmung von Benzotriaz
Brühl, DE
Parameter Verfahren Abw Ofw Grw Benzol und Derivate (BTEX) DIN 38407 -F 9: 1991 -05* DIN 38407 -F 43: 2014 -10 DIN EN ISO 15680: 2004 -04 (F 19) DIN EN ISO 17943: 2016 -11 (F 41) Organochlor -Insektizide (OCP) DI
Bremerhaven, DE
1.6 Gemeinsam erfassbare Stoffgruppen DIN EN ISO 6468 (F 1) 1997-02 DIN 38407-F 2 1993-02 DIN 38407-F 3 1998-07 DIN 38407-F 30 2007-12 DIN 38407-F 36 2014-09 DIN 38407-F 39 2011-09 DIN 38407-F 43 2014-10 DIN 38407-F 47 2017-07 DIN EN ISO 20
Münster, DE
DIN EN ISO 12846 (E 12) 2012-08 Wasserbeschaffenheit - Bestimmung von Quecksilber - Verfahren mittels Atomabsorptionsspektrometrie (AAS) mit und ohne Anreicherung DIN EN ISO 11885 (E 22) 2009-09 Wasserbeschaffenheit - Best
Georgsmarienhütte, DE
Parameter Verfahren Abw Ofw Grw Organochlor-Insektizide (OCP) DIN EN ISO 6468: 1997-02 (F 1)* DIN 38407-F 37: 2013-11 DIN EN 16693: 2015-12 (F 51) Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997-02 (F 1)* DIN 38407-F 3
Mainleus-Rothwind, DE
DIN EN ISO 5961 (E 19) 1995-05 Wasserbeschaffenheit - Bestimmung von Cadmium durch Atomabsorptionsspektrometrie DIN EN ISO 11885 (E 22) 2009-09 Wasserbeschaffenheit - Bestimmung von ausgewählten Elementen durch induktiv gekopp
Überlingen, DE
Parameter Verfahren Abw Ofw Grw Gesamter gebundener Stickstoff (TNb) DIN EN 12260: 2003-12 (H 34) DIN EN ISO 11905-1: 1998-08 (H 36) Adsorbierbare organische Halogene (AOX) DIN EN ISO 9562: 2005-02 (H 14) Teilbereich 6: Gasch
München, DE
1.4.5 mittels induktiv gekoppeltem Plasma DIN EN ISO 11885 (E 22) 2009-09 Wasserbeschaffenheit - Bestimmung von ausgewählten Elementen durch induktiv gekoppelte Plasma-Atom- Emissionsspektrometrie (ICP-OES) MU DIN EN ISO 1729
Siegen, DE
1.5 Jointly determinable substances *** DIN 38407-F 3 1998-07 K DAkkS Deutsche Akkreditierungsstelle Gas chromatographic determination of polychlorinated biphenyls DIN EN ISO 10301 (F 4) Water quality — Determination of highly volatile halo
Emmingen-Liptingen, DE
1.4 Kationen DIN EN 1483 -E 12 2007-07 Wasserbeschaffenheit - Bestimmung von Quecksilber - Verfahren mittels Atomabsorptionsspektrometrie DIN EN ISO 12846 (E 12) 2012-08 Wasserbeschaffenheit - Bestimmung von Quecksilber -
Hanau, DE
1.4 Kationen DIN 38406 -E 5 1983-10 Bestimmung des Ammonium -Stickstoffs DIN EN ISO 12846 (E 12) 2012-08 Wasserbeschaffenheit - Bestimmung von Quecksilber - Verfahren mittels Atomabsorptionsspektrometrie (AAS) mit und ohne
Bremen, DE
Parameter Verfahren Abw Ofw Grw Organochlor -Insektizide (OCP) DIN EN ISO 6468: 1997 -02 (F 1)* DIN 38407 -F 37: 2013 -11 DIN EN 16693: 2015 -12 (F 51) Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997 -02 (F 1)*
Ottersberg, DE
Parameter Verfahren Abw Ofw Grw Gesamter gebundener Stickstoff (TNb) DIN EN 12260: 2003-12 (H 34) DIN EN ISO 11905-1: 1998-08 (H 36) Adsorbierbare organische Halogene (AOX) DIN EN ISO 9562: 2005-02 (H 14) Teilbereich 6: Gasc
Möhrendorf, DE
DIN EN ISO 15061 (D 34) 2001-12 Wasserbeschaffenheit - Bestimmung von gelöstem Bromat - Verfahren mittels Ionenchromatographie 1.5 Kationen DIN 38406 -E 5 1983-10 Bestimmung des Ammonium -Stickstoffs DIN EN ISO 17294
Penzlin, DE
Parameter Verfahren Abw Ofw Grw Organochlor -Insektizide (OCP) DIN EN ISO 6468: 1997 -02 (F 1)* DIN 38407 -F 37: 2013 -11 DIN EN 16693: 2015 -12 (F 51) Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997 -02 (F 1)*
Fehrbellin, DE
Parameter Verfahren Abw Ofw Grw Chemischer Sauerstoffbedarf (CSB) DIN 38409-H 41: 1980-12 DIN 38409-H 44: 1992-05 DIN ISO 15705: 2003-01 (H 45) Phenolindex DIN 38409-H 16-2: 1984-06 DIN 38409-H 16-1: 1984-06 DIN E
Bayreuth, DE
1 Bestimmung von polyhalogenierter Dibenzo-p-dioxine und Dibenzofurane und polyhalogenierter Biphenyle in Wasser, Abwasser, Schlamm, Klärschlamm, Sedimenten, Boden, Kompost, Pflanzen und pflanzlichen Materialien, Abfall, Staub, Stoffen zu
Mannheim, DE
DIN EN ISO 11732 (E 23) 2005-05 Wasserbeschaffenheit - Bestimmung von Ammoniumstickstoff - Verfahren mittels Fließanalytik (CFA und FIA) und spektrometrischer Detektion DIN EN ISO 17294 -2 (E 29) 2017-01 Wasserbeschaffenheit -
Krauthausen, DE
Parameter Verfahren Abw Ofw Grw Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997 -02 (F 1)* DIN 38407 -F 3: 1998 -07 DIN 38407 -F 37: 2013 -11 Mono -, Dichlorbenzole DIN EN ISO 15680: 2004 -04 (F 19) DIN 3840
Kiel, DE
Parameter Verfahren Abw Ofw Grw Polychlorierte Biphenyle (PCB) DIN EN ISO 6468: 1997-02 (F 1)* DIN 38407-F 3: 1998-07 DIN 38407-F 37: 2013-11 Mono-, Dichlorbenzole DIN EN ISO 15680: 2004-04 (F 19) DIN 38407-F 43: 2014-10
Söhrewald, DE
Parameter Verfahren Abw Ofw Grw Gelöster organsicher Kohlenstoff (DOC) DIN EN 1484: 1997 -08 (H 3) Gesamter gebundener Stickstoff (TN b) DIN EN 12260: 2003 -12 (H 34) DIN EN ISO 11905 -1: 1998 -08 (H 36) Adsorbierbare
This page is a fixed slice of the register: every DIN 38407-F3 scope we hold for Germany. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in GermanyDeutsche Akkreditierungsstelle (DAKKS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Germany.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.