fem-SMS
Katharinenstraße 17, 73525, Schwäbisch Gmünd, Germany
- Accredited standards
- 35
- DAKKS certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 35 standard numbers and the 32 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO24
ISO 105-B06Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)
ISO 1520Paints and varnishes - Cupping test
ISO 2143Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2808Paints and varnishes - Determination of film thickness
ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
ISO 2815Paints and varnishes - Buchholz indentation test
ISO 2931Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
ISO 3210Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
Show all 24
ISO 4623-2Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6272-2Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 11997-1Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
ISO 16474-2Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 16925Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting
ISO 18771Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper
ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 22479Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method)
ISO 4628 series5
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 4628-10Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO 2812 series3
ISO 2812-1Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
ISO 2812-3Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 2812-4Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
Other standards3
ASTM D2794
DIN 3476-1
EN 12206-1
DIN EN ISO 2360; DIN EN ISO 2178; DIN EN ISO 2808; DIN EN ISO 105 -B06; DIN EN ISO 16474 -2; DIN EN ISO 16474 -3; DIN EN ISO 4623 -2; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3
DIN EN 12206-1; DIN EN ISO 1519; DIN EN ISO 1520; DIN EN ISO 2409; DIN EN ISO 2815; DIN EN ISO 4624; DIN EN ISO 6272-2; DIN EN ISO 16925; DIN EN ISO 20567-1; ASTM D2794; QUALICOAT Specifications
DIN EN ISO 2143; DIN EN ISO 2931; DIN EN ISO 3210; ISO 18771
DIN EN ISO 2813; DIN EN ISO/CIE 11664 -4; DIN 3476 -1
DIN EN ISO 4628-8; DIN EN ISO 4628-10; DIN EN ISO 9227; DIN EN ISO 11997-1; DIN EN ISO 22479; QUALICOAT Specifications; DIN EN ISO 2812-1; DIN EN ISO 2812-3; DIN EN ISO 2812-4; DIN EN ISO 6270-2; AAMA 2603-21
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
8 lines
ISO/IEC 17025
ActiveD-PL-23215-01-00
Accredited scope, certificate D-PL-23215-01-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO/IEC 17000 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-23215-01-01
Accredited scope, certificate D-PL-23215-01-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 2143; DIN EN ISO 2931; DIN EN ISO 3210; ISO 18771 | aluminium and aluminium alloys; oxide layers; coatings; surface layers; paints | - |
| 3 | DIN EN 12206-1; DIN EN ISO 1519; DIN EN ISO 1520; DIN EN ISO 2409; DIN EN ISO 2815; DIN EN ISO 4624; DIN EN ISO 6272-2; DIN EN ISO 16925; DIN EN ISO 20567-1; ASTM D2794; QUALICOAT Specifications | Beschichtungsstoffe | - |
| 4 | DIN EN ISO 2360; DIN EN ISO 2178; DIN EN ISO 2808; DIN EN ISO 105 -B06; DIN EN ISO 16474 -2; DIN EN ISO 16474 -3; DIN EN ISO 4623 -2; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3 | Beschichtungsstoffe; Textilien | - |
| 5 | DIN EN ISO 4628-8; DIN EN ISO 4628-10; DIN EN ISO 9227; DIN EN ISO 11997-1; DIN EN ISO 22479; QUALICOAT Specifications; DIN EN ISO 2812-1; DIN EN ISO 2812-3; DIN EN ISO 2812-4; DIN EN ISO 6270-2; AAMA 2603-21 | Beschichtungsstoffe; aluminium | - |
| 6 | DIN EN ISO 2813; DIN EN ISO/CIE 11664 -4; DIN 3476 -1 | Beschichtungsstoffe; Armaturen | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.