Registers refreshed 2026-11-08.See refresh dates
Poland

PGO S.A.

ul. Staszica 1, 63-100, Śrem, Poland

PCA AB 040ISO/IEC 17025Register refreshed 2026-11-06
One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
8
PCA certificate
1
Sites in our directory
2
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 8 standard numbers and the 6 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 444
EN 1435
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film

Read from the PCA scope document we downloaded on 2026-02-11. Register refreshed 2026-11-06.

Scope as published by PCA

2 lines
PCA

ISO/IEC 17025

Active

AB 040

The scope document we hold says it was valid until 2026-04-22. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-02-11. Check the PCA register for the current scope.

View on PCA

Accredited scope, certificate AB 040

LineMethodMatrixRange
1-construction materials and products including cast iron and steel
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

PCA Zakres akredytacji Nr AB 040 Scope of accreditation No AB 040 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No AB 040 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 27 z/of 02.04.2025 KIEROWNIK DZIAŁU AKREDYTACJI BADAŃ MECHANICZNYCH I FIZYCZNYCH MARIA SZAFRAN Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 040 z dnia 28.03.2024 r. Cykl akredytacji od 12.09.2023 do 22.04.2026 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No. AB 040 of 12.09.2023 Accreditation cycle from 12.09.2023 to 22.04.2026 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No. 27, 02.04.2025 1/3 Nazwa i adres / Name and address PGO S.A. al. W. Roździeńskiego 1B 40-202 Katowice PGO S.A. ODLEWNIA ŻELIWA ODDZIAŁ W ŚREMIE LABORATORIUM BADAWCZE ul. Staszica 1 63-100 Śrem Kod identyfikacyjny / Identification code *) Dziedzina i przedmiot badań / Field of testing and item: - J/8 - Badania mechaniczne wyrobów i materiałów konstrukcyjnych w tym żeliwa i stali / Mechanical tests of construction materials and products including cast iron and steel - L/8 - Badania nieniszczące wyrobów i materiałów konstrukcyjnych w tym żeliwa i stali / Non-destructive tests of construction materials and products including cast iron and steel Wersja strony/Page version: A *) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl / The identification code according to the Annex to document DAB-07, available at PCA website www.pca.gov.pl AB 040
-
2PN-EN ISO 6892-1:2020-05; PN-EN ISO 6892-1:2010; PN-EN ISO 6506-1:2014-12; PN-EN ISO 6506-1:2008; PN-EN ISO 6508-1:2016-10; PN-EN ISO 6508-1:2007; PN-EN ISO 148-1:2017-02; PN-EN 444:1998; PN-EN ISO 5579:2014-02; PN-EN 1435:2001; PN-EN ISO 17636-1:2013-06; PN-EN ISO 17636-1:2023-02Wyroby i materiały metalowe; Złącza spawane z materiałów metalowychto 450 HBW

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ul. Staszica 1, Śrem, 63-100, PL

52.08933, 17.01568

Open in Maps

Other Locations

1 other site in this organization

Piotrków Trybunalski, PL
View
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.