materia services
Ilsahl 5, 24536, Neumünster, Germany
Visit website- Accredited standards
- 21
- DAKKS certificates
- 3
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 21 standard numbers and the 16 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO15
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 3369Impermeable sintered metal materials and hardmetals - Determination of density
ISO 3887Steels - Determination of the depth of decarburization
ISO 4499-2Hardmetals - Metallographic determination of microstructure - Part 2: Measurement of WC grain size
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7438Metallic materials - Bend test
ISO 9220Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 22262-1Air quality - Bulk materials - Part 1: Sampling and qualitative determination of asbestos in commercial bulk materials
Other standards6
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E1077
DIN 30902
DIN 50106
EN 1071-10
EN 10328
DIN EN ISO 148 -1; DIN EN ISO 3369; ms HV002; DIN EN ISO 643; DIN EN ISO 945 -1; DIN EN ISO 1463; DIN EN ISO 3887; DIN EN ISO 4499 -2; DIN EN ISO 17639; DIN EN 1071 -10; DIN 30902
DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1; DIN EN 10328; DIN EN ISO 6892 -1; ASTM E 8/E 8M; DIN 50106; DIN EN ISO 7438
ASTM E 1077; ETTC 2; Merkblatt DVS 2310 -1; DIN EN ISO 9220; ms HV003
ISO 22262 -1; VDI 3492; VDI 3866 Blatt 1; VDI 3866 Blatt 5; VDI 3877 Blatt 1; DGUV -I 213 -546; ms HV001
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
8 lines
ISO/IEC 17025
ActiveD-PL-22604-01-00
Accredited scope, certificate D-PL-22604-01-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-22604-01-01
Accredited scope, certificate D-PL-22604-01-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1; DIN EN 10328; DIN EN ISO 6892 -1; ASTM E 8/E 8M; DIN 50106; DIN EN ISO 7438 | metallische Werkstoffe; metallischen Werkstoffen und Bauteilen; metallischen Werkstoffen und Bauteilen | - |
| 3 | DIN EN ISO 148 -1; DIN EN ISO 3369; ms HV002; DIN EN ISO 643; DIN EN ISO 945 -1; DIN EN ISO 1463; DIN EN ISO 3887; DIN EN ISO 4499 -2; DIN EN ISO 17639; DIN EN 1071 -10; DIN 30902 | Metal | - |
| 4 | ASTM E 1077; ETTC 2; Merkblatt DVS 2310 -1; DIN EN ISO 9220; ms HV003 | Steel Specimens; Stäbe aus Titanlegierungen; thermisch gespritzten Schichten; Metallische Überzüge; unbekannter Proben | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-22604-01-02
Accredited scope, certificate D-PL-22604-01-02
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | ISO 22262 -1; VDI 3492; VDI 3866 Blatt 1; VDI 3866 Blatt 5; VDI 3877 Blatt 1; DGUV -I 213 -546; ms HV001 | Ambient air | - |
| 3 | IFA 7485 V/2009; DGUV-Information 213-546 02/2014 | Faserstäube; Asbestfasern; Fasern, allgemein, lungengängig; Asbestfasern und andere anorganische Fasern | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Germany
- Uhlig Z(f)PLangelsheim · ~242 kmDAKKSShares 3 accredited methods and materialsEN ISO 1463EN ISO 6507-1Metal
- JR-WP Ausbildung und DienstleistungsMagdeburg · ~248 kmDAKKSShares 3 accredited methods and materialsEN ISO 1463EN ISO 6507-1Metal
- RST Rail System TestingHennigsdorf · ~269 kmDAKKSShares 3 accredited methods and materialsEN ISO 1463EN ISO 6507-1Metal
- ZEROSBerlin · ~302 kmDAKKSShares 3 accredited methods and materialsEN ISO 1463EN ISO 6507-1Metal
- Dr. Brill + Partner GmbH Institut für Hygiene und MikrobiologieHamburg · ~49 kmDAKKSShares 2 accredited materialsAmbient airMetal
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.