Wavin Technology & Innovation
Rollepaal 20, 7701 BS, DEDEMSVAART, Netherlands
- Accredited standards
- 10
- RvA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the RvA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 10 standard numbers and the 6 official names we hold. When no standard matches, it searches the method text of every scope line.
BS 7291-2
EN 13598-2
EN 17150
EN 17151
ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
ISO 3501Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force
ISO 9080Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9967Thermoplastics pipes - Determination of creep ratio
ISO 13056Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
ISO 13267Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
ISO 3501; BS 7291-2; EN-ISO 13056; EN 13598-2; ISO 13267; EN 17150; EN 17151
EN-ISO 1167-1/2
ISO 9080
EN-ISO 9967
Read from the RvA scope document we downloaded on 2026-02-11. Register refreshed 2026-11-08.
Scope as published by RvA
4 lines
ISO/IEC 17025
ActiveL054
The scope document we hold says it is valid until 2028-01-01.
Accredited scope, certificate L054
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | EN-ISO 1167-1/2 | Thermoplastic pipe, without a fitting | - |
| 2 | EN-ISO 9967 | Thermoplastic pipe | - |
| 3 | ISO 9080 | Thermoplastic pipe | - |
| 4 | ISO 3501; BS 7291-2; EN-ISO 13056; EN 13598-2; ISO 13267; EN 17150; EN 17151 | Thermoplastic pipe systems; Thermoplastic inspection chamber and manholes; Thermoplastic infiltration box | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the RvA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the RvA entry linked above.