IMA Materialforschung und Anwendungstechnik GmbH Labor für Medizinprodukteprüfung
Wilhelmine-Reichard-Ring 4, 01109, Dresden, Germany
Visit website- Accredited standards
- 77
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 77 standard numbers and the 37 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM45
ASTM F382
ASTM F384
ASTM F543
ASTM F1044
ASTM F1147
ASTM F1160
ASTM F1223
ASTM F1264
ASTM F1378
ASTM F1714
ASTM F1717
ASTM F1798
Show all 45
ASTM F1800
ASTM F1814
ASTM F1820Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
ASTM F1829
ASTM F1875Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface
ASTM F1877
ASTM F2003
ASTM F2009Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
ASTM F2028
ASTM F2077
ASTM F2083
ASTM F2193
ASTM F2255
ASTM F2256
ASTM F2258
ASTM F2267
ASTM F2345Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
ASTM F2346
ASTM F2458
ASTM F2502
ASTM F2580
ASTM F2582Standard Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components
ASTM F2665
ASTM F2722
ASTM F2723
ASTM F2724
ASTM F2777
ASTM F2996
ASTM F3090
ASTM F3140
ASTM F3161
ASTM F3210
ASTM F3334
ISO15
ISO 5836Implants for surgery - Metal bone plates - Holes corresponding to screws with asymmetrical thread and spherical under-surface
ISO 5837-1Implants for surgery - Intramedullary nailing systems - Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
ISO 6475Implants for surgery - Metal bone screws with asymmetrical thread and spherical under-surface - Mechanical requirements and test methods
ISO 7207-2Implants for surgery - Components for partial and total knee joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials
ISO 7886-1Sterile hypodermic syringes for single use - Part 1: Syringes for manual use
ISO 9585Implants for surgery - Determination of bending strength and stiffness of bone plates
ISO 13179-1Implants for surgery - Coatings on metallic surgical implants - Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders
ISO 13779-4Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength
ISO 14242-1Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-2Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement
ISO 14630Non-active surgical implants - General requirements
ISO 14801Dentistry - Implants - Dynamic loading test for endosseous dental implants
ISO 14879-1Implants for surgery - Total knee-joint prostheses - Part 1: Determination of endurance properties of knee tibial trays
ISO 17853Wear of implant materials - Polymer and metal wear particles - Isolation and characterization
ISO 22622Implants for surgery - Wear of total ankle-joint prostheses - Loading and displacement parameters for wear-testing machines with load or displacement control and corresponding environmental conditions for test
ISO 7206 series6
ISO 7206-2Implants for surgery - Partial and total hip joint prostheses - Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
ISO 7206-4Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties and performance of stemmed femoral components
ISO 7206-6Implants for surgery - Partial and total hip joint prostheses - Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
ISO 7206-10Implants for surgery - Partial and total hip-joint prostheses - Part 10: Determination of resistance to static load of modular femoral heads
ISO 7206-12Implants for surgery - Partial and total hip joint prostheses - Part 12: Deformation test method for press-fit acetabular components
ISO 7206-13Implants for surgery - Partial and total hip joint prostheses - Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
ISO 14243 series4
ISO 14243-1Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement
ISO 14243-3Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO 14243-5Implants for surgery - Wear of total knee prostheses - Part 5: Durability performance of the patellofemoral joint
ISO 5832 series4
ISO 5832-3Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
ISO 5832-4Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy
ISO 5832-9Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel
ISO 5832-12Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy
ISO 5838 series3
ISO 5838-1Implants for surgery - Metallic skeletal pins and wires - Part 1: General requirements
ISO 5838-2Implants for surgery - Skeletal pins and wires - Part 2: Steinmann skeletal pins - Dimensions
ISO 5838-3Implants for surgery - Skeletal pins and wires - Part 3: Kirschner skeletal wires
ISO 5837-1; ASTM F1264; ISO 5838-3; ISO 9585; ASTM F382; ISO 5836; ISO 6475; ASTM F543; ASTM F2502; ASTM F384; ISO 5838-1; ISO 5838-2; IMA-PV C/32; ASTM F2028
DIN EN ISO 14801:2017-03; ISO 14879-1:2020-07; ISO 17853:2011; ISO 22622:2019-07; ASTM F382-17; ASTM F384-17; ASTM F543-17; ASTM F1044-05(2017)e1; ASTM F1147-05(2017)e1; ASTM F1160-14(2017)e1; ASTM F1223-20; ASTM F1264-16e1; ASTM F1378-18e1; ASTM F1714-96; ASTM F1717-21; ASTM F1798-21; ASTM F1800-19e1; ASTM F1814-22
IMA-PV C/33.1; IMA-PV C/33.3; IMA-PV C/33.4; ISO 7206-2; ISO 7207-2; ISO 14242-1; ISO 14242-2; ISO 14243-2; ASTM F1829; ASTM F1378; ASTM F2665; ISO 22622; IMA-PV C/36; ASTM F2003; ASTM F1044; ASTM F1147; ASTM F1160; ISO 13179-1; ISO 13779-4; IMA-PV C/41; IMA-PV C/40; ASTM F2346
DIN EN ISO 14630; ISO 7207-2; ASTM F2777; ASTM F3210; ASTM F3161; ASTM F1223; ISO 14243-1; ISO 14243-2; ISO 14243-3; ISO 14243-5; ASTM F1800; ISO 14879-1; IMA-PV C/38; ASTM F3140; ASTM F3334; ASTM F1814; ASTM F2722; ASTM F2723; ASTM F2724; ASTM F2083
ISO 7206-6; ISO 7206-4; ASTM F2996; ASTM F2009; ASTM F2345; ISO 7206-2; ISO 14242-1; ISO 14242-2; ASTM F1714; ISO 7206-10; ISO 7206-13; ASTM F2582; ISO 7206-12; ASTM F3090; ASTM F1820; ASTM F1875; ASTM F2580
ASTM F2193; ASTM F1798; ASTM F1717; ASTM F2077; ASTM F2267; DIN EN ISO 14801; ASTM F2255; ASTM F2256; ASTM F2258; ASTM F2458; DIN EN ISO 7886-1; DIN EN ISO 14630
ASTM F1820-22; ASTM F1829-17; ASTM F1875-98 (2022); ASTM F1877-16; ASTM F2003-02(2022); ASTM F2009-20; ASTM F2028-17; ASTM F2077-22; ASTM F2083-21; ASTM F2193-20; ASTM F2255-05(2015); ASTM F2256-05(2015); ASTM F2258-05(2015); ASTM F2267-22; ASTM F2345-21; ASTM F2346-18; ASTM F2458-05(2015); ASTM F2502-17; ASTM F2580-18; ASTM F2582-20
DIN EN ISO 5832-3; DIN ISO 5832-4; DIN ISO 5832-9; DIN ISO 5832-12; ASTM F1877; ISO 17853
ASTM F2665-21; ASTM F2722-21; ASTM F2723-21; ASTM F2724-21; ASTM F2777-16; ASTM F2996-20; ASTM F3090-20; ASTM F3140-17; ASTM F3161-16; ASTM F3210-22e1; ASTM F3334-19; IMA-PV C/32: 2013-05; IMA-PV C/33.1: 2010-12; IMA-PV C/33.3: 2013-01; IMA-PV C/33.4: 2010-03; IMA-PV C/36: 2015-07; IMA-PV C/38: 2009-03; IMA-PV C/40: 2013-01; IMA-PV C/41: 2023-05
DIN EN ISO 5832-3:2022-02; DIN ISO 5832-4:2015-12; DIN ISO 5832-9:2020-07; DIN ISO 5832-12:2020-07; ISO 5836:1988-12; ISO 5837-1:1985-06; ISO 5838-1:2013-03; ISO 5838-2:1991-01; ISO 5838-3:1993-09; ISO 6475:1989-11; ISO 7206-2:2011-04; ISO 7206-2 AMD 1:2016-09; ISO 7206-4:2010-06; ISO 7206-4 AMD 1:2016-03; ISO 7206-6:2013-11; ISO 7206-10: 2018-08; ISO 7206-10 AMD 1:2021-05; ISO 7206-12:2016-10
ISO 7206-13:2016-07; ISO 7206-13 AMD 1:2022-05; ISO 7207-2:2011-07; ISO 7207-2 AMD 1:2016; ISO 7207-2 AMD 2:2020-06; DIN EN ISO 7886-1:2020-11; ISO 9585:1990-12; ISO 13179-1:2021; ISO 13779-4:2018; ISO 14242-1:2014-10; ISO 14242-2:2016-09; ISO 14243-1:2009-11; ISO 14243-1 AMD 1:2020-01; ISO 14243-2:2016-09; ISO 14243-3:2014-11; ISO 14243-3 AMD 1:2020-01; ISO 14243-5:2019-05; DIN EN ISO 14630:2013-03
Read from the scope as published by DAKKS. Register refreshed 2026-10-23.
Scope as published by DAKKS
13 lines
ISO/IEC 17025
ActiveD-PL-13119-01-00
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.