Registers refreshed 2026-11-08.See refresh dates
Sweden

Amexci

Mossbergavägen 5, 702 28, Örebro, Sweden

Visit website
SWEDAC a015253-001SWEDAC A015253-001ISO/IEC 17025Register refreshed 2026-11-08

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
5
SWEDAC certificates
2
Site in our directory
1
SWEDAC accredited scope

What this lab is accredited for

Our reading of the SWEDAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 5 standard numbers and the 5 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

Read from the scope as published by SWEDAC. Register refreshed 2026-11-08.

Scope as published by SWEDAC

2 lines
SWEDAC

ISO/IEC 17025

Active

a015253-001

View on SWEDAC

Accredited scope, certificate a015253-001

LineMethodMatrixRange
1SS-EN ISO/IEC 17025:2018 Amexci AB; SS-EN ISO 148-1:2016 Impact Testing Charpy Metallic materials No SS-EN ISO 6507-1:2023 Hardness Testing Vickers Metallic materials No Not appendix H SS-EN ISO 6892-1:2019 Tensile Testing Metallic materials No Not appendix G Changes in the scope of accreditation are in bold; ISO/IEC 17025:2018 Amexci AB Örebro Accreditation number 10577 Material Lab Development Department A015253-001 Material testing Method Parameter Technique Material Field Note ASTM E8/E8M:2024 Tensile Testing Metallic materials No ASTM E92:2023 Hardness Testing Vickers Metallic materials No SS-EN ISO 148-1:2016 Impact Testing Charpy Metallic materials No SS-EN ISO 6507-1:2023 Hardness Testing Vickers Metallic materials No Not appendix H SS-EN ISO 6892-1:2019Metal-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

SWEDAC

ISO/IEC 17025

Active

A015253-001

View on SWEDAC

Accredited scope, certificate A015253-001

LineMethodMatrixRange
1ASTM E8/E8M-25; ASTM E92-23; SS-EN ISO 148-1:2016; SS-EN ISO 6507-1:2023; SS-EN ISO 6892-1:2019; SS-EN ISO/IEC 17025:2018Metalliska material-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Mossbergavägen 5, Örebro, 702 28, SE

59.24171, 15.14134

Open in Maps
← All accredited testing labs in Sweden

Labs with overlapping accredited scope in Sweden

Accreditation data refreshed from the SWEDAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the SWEDAC entry linked above.