Italy

OFAR

Via Dell'industria, 5, 25010, Visano, Italy

ACCREDIA 02059ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 15
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 15 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM9

ASTM E3Standard Guide for Preparation of Metallographic Specimens

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

ASTM E10Standard Test Method for Brinell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E10-23 - escluso/except

Exclusion. Written next to it on line 1 of ACCREDIA certificate 02059.

ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

ASTM E45Standard Test Methods for Determining the Inclusion Content of SteelSome methods

Limits written next to it

ASTM E45-25 - solo/only Metodo A, D Microscopia ottica

Some methods. Written next to it on line 1 of ACCREDIA certificate 02059.

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

ASTM E112Standard Test Methods for Determining Average Grain SizeSome clauses

Limits written next to it

ASTM E112-25 - solo/only Paragrafo

Some clauses. Written next to it on line 1 of ACCREDIA certificate 02059.

ASTM E407Standard Practice for Microetching Metals and Alloys

ISO6

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

ISO 643Steels - Micrographic determination of the apparent grain sizeSome clauses

Limits written next to it

ISO 643:2024 - solo/only Paragrafo

Some clauses. Written next to it on line 1 of ACCREDIA certificate 02059.

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

1 line

ACCREDIA

ISO/IEC 17025

Active

02059

View scope

Accredited scope, certificate 02059

Line	Method	Matrix	Range
1	ISO 643:2024; ASTM E45-25; ASTM E112-25; ASTM E3-11(2025) + ASTM E407-23; ISO 6506-1:2014; ASTM E10-23; ASTM E92-23; ISO 6507-1:2023; ISO 148-1:2016; ASTM E23-25; ISO 6892-1:2019; ASTM E8/E8M-25; ASTM E21-20; ISO 6892-2:2018; UNI CEI EN ISO/IEC 17025:2018	Metal	to 600 KN

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Dell'industria, 5, Visano, 25010, IT

45.31838, 10.37238

Open in Maps

← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.