Registers refreshed 2026-11-08.See refresh dates
Germany

Hochschule für angewandte Wissenschaften Hof

Alfons-Goppel-Platz 1, 95028, Hof, Germany

DAKKS D-PL-23036-01-00DAKKS D-PL-23036-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
14
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 14 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO13
ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
ISO 3759Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 5077Textiles - Determination of dimensional change in washing and drying
ISO 5084Textiles - Determination of thickness of textiles and textile products
ISO 6330Textiles - Domestic washing and drying procedures for textile testing
ISO 9073-3Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method
ISO 9237Textiles - Determination of the permeability of fabrics to air
ISO 12945-2Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 2: Modified Martindale method
ISO 12945-4Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 4: Assessment of pilling, fuzzing and matting by visual analysis
ISO 12947-2Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
ISO 13934-1Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13937-2Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
ISO 13937-3Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
Other standards1
EN 12127

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

4 lines
DAKKS

ISO/IEC 17025

Active

D-PL-23036-01-00

View scope

Accredited scope, certificate D-PL-23036-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-23036-01-01

View scope

Accredited scope, certificate D-PL-23036-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO 9073 -3; DIN EN ISO 13934 -1; DIN EN ISO 13937 -2; DIN EN ISO 13937 -3; DIN EN ISO 12945 -2; DIN EN ISO 12945 -4; DIN EN ISO 12947 -2Textile-
3DIN EN ISO 105 -X12; DIN EN ISO 9237; DIN EN 12127; DIN EN ISO 3759; DIN EN ISO 5077; DIN EN ISO 5084; DIN EN ISO 6330Textile-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Alfons-Goppel-Platz 1, Hof, 95028, DE

50.32529, 11.94053

Open in Maps

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.