Italy

Officine Nicola Galperti e Figlio

Viale Giovanni De Pianto 578, 23016, Cercino, Italy

ACCREDIA 01322ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 18
ACCREDIA certificate: 1
Site in our directory: 1

ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 18 standard numbers and the 17 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM15

ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel ProductsExclusion

Limits written next to it

ASTM A370-24a - escluso/except

Exclusion. Written next to it on line 2 of ACCREDIA certificate 01322.

ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

ASTM E3Standard Guide for Preparation of Metallographic Specimens

ASTM E8Standard Test Methods for Tension Testing of Metallic MaterialsExclusion

Limits written next to it

ASTM E8/E8M-25 - escluso/except

Exclusion. Written next to it on line 2 of ACCREDIA certificate 01322.

ASTM E10Standard Test Method for Brinell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E10-23 - escluso/except cap

Exclusion. Written next to it on line 1 of ACCREDIA certificate 01322.

ASTM E45Standard Test Methods for Determining the Inclusion Content of SteelSome methods

Limits written next to it

ASTM E45-25 - solo/only Metodo A +

Some methods. Written next to it on line 1 of ACCREDIA certificate 01322.

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

ASTM E112Standard Test Methods for Determining Average Grain SizeSome clauses

Limits written next to it

ASTM E112-25 - solo/only paragrafo

Some clauses. Written next to it on line 2 of ACCREDIA certificate 01322.

ASTM E340Standard Practice for Macroetching Metals and Alloys

ASTM E384Standard Test Method for Microindentation Hardness of Materials

ASTM E407Standard Practice for Microetching Metals and Alloys

ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

ASTM G28

ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

ISO3

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

2 lines

ACCREDIA

ISO/IEC 17025

Active

01322

View scope

Accredited scope, certificate 01322

Line	Method	Matrix	Range
1	UNI CEI EN ISO/IEC 17025:2018; ASTM A262-15(2021); ASTM A923-25; ASTM G48-25; ASTM E45-25; ASTM G28-24; ASTM E112-25; ASTM E3-11(2025); ASTM E340-23; ASTM E407-23; ASTM E562-19e1; UNI EN ISO 6506-1:2015; ASTM E10-23; ASTM A370-24a; ASTM E384-22; UNI EN ISO 6507-1:2023; ASTM E92-23; UNI EN ISO 148-1:2016	Metal	2.5 to 450 J
2	ASTM E8/E8M-25; ASTM A370-24a; ASTM E112-25; UNI CEI EN ISO/IEC 17025:2018	-	4 to 200 kN

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Viale Giovanni De Pianto 578, Cercino, 23016, IT

46.15809, 9.50814

Open in Maps

← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.