Qualimet
Edmonton, Canada
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at Qualimet?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 6108.01Active
- 6108.02Active
Accredited standards
We found no published test standard numbers in this lab’s scope (labs often list in-house methods instead). The full scope as published is below.
Scope as published by A2LA
6 lines
ISO/IEC 17025
Active6108.01
The scope document we hold says it is valid until 2027-12-31.
Accredited scope, certificate 6108.01
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 3
(A2LA Cert. No. 6108.01) 01/29/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 QUALIMET INC. 8055 Coronet Road Edmonton, Alberta, Canada Don Keith Phone: +1-780-469-5870 MECHANICAL Valid To: December 31, 2027 Certificate Number: 6108.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on metals: Test: Test Method(s): Bend ASTM A370, ASTM E290; ASME SA370 Nick Break/ Fracture Test AWS B4.0, API 1104, CSA Z662 Macro Examination ASTM E340, ASTM E381, ASTM A604/A604M, ASTM A561 Micro Examination ASTM E407 Volume Fraction Analysis ASTM E562, ASTM E407 Tensile, Yield, Elongation, Reduction of Area, and Elevated Temperature (0.222 to 533) kN (RT to 450 ℃) ASTM A370, ASTM B557, ASTM E8/E8M Toughness (Charpy Impact Tester (0 to 325) J, Cooling Chamber – (Room Temperature to -196) ℃ ASTM A370, ASTM E23 Hardness: Vickers (0.1, 0.5, 1, 5 and 10 Kg loads) ASTM E92 Rockwell (B and C) ASTM A370, ASTM E18, ASTM F606/F606M Brinell (10 mm ball, 3000 Kg load) ASTM E10 Pitting/Corrosion ASTM G48 - Method A Detecting Detrimental Intermetallic Phase ASTM A923 Methods A, B, and C Intergranular Attack in Ferritic Stainless Steels ASTM A763 Methods Y, W, and Z Intergranular Attack in Austenitic Stainless Steels ASTM A262 Practices A, E, and F Weld Evaluation and Qualification ASME IX Part QS and QB; API 1104; AWS D1.1/D1.1M Section 4, D1.2/D1.2M Section 3, D1.4/D1.4M Section 6, D1.5/D1.5 M section 5, D1.6/D1.6M section 6, D1.7/D1.7M Section 4, D1.8/D1.8M Sections 5&6, D1.9/D1.9M section 3, D14.1/D14.1M (withdrawn 2017; superseded by D14.0/D14.0M) Section 6, D15.1/D15.1M Sections 10-12, D17.1/D17.1M Section 5, B2.1/B2.1M Sections 4-5, B2.2/B2.2M Sections 4-5; CSA W47.1 Sections 8,9,11; W59 Sections 10, 11, 12
Part 2 of 3
(A2LA Cert. No. 6108.01) 01/29/2026 Page 2 of 2 The accredited test methods are used in determining compliance with the material and weld specifications listed below: ASTM A653M, ASTM D618, CSA G4O.2O, CSA G4O.2I, CSA 2245I, CSA 2245.11, CSA 2245.12, C542245.15, ISO 898 Part l, JIS B 1051 Part 1, SAE J429, J1199, API 5CT, API 5C7, API 5D, API 5L, API 5LC, API 5LS, API 5LX, API 64', API 7, API 7K, API 7-1, API 9A, API I1B, API 12C, API 650, ASME Sec. II, Parts A, B, and C.
Part 3 of 3
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited QUALIMET INC. Edmonton, Alberta, CANADA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 29th day of January 2026. __ _____________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 6108.01 Valid to December 31, 2027
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
ISO/IEC 17025
Active6108.02
The scope document we hold says it is valid until 2027-12-31.
Accredited scope, certificate 6108.02
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 3
(A2LA Cert. No. 6108.01) 01/29/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 QUALIMET INC. 8055 Coronet Road Edmonton, Alberta, Canada Don Keith Phone: +1-780-469-5870 MECHANICAL Valid To: December 31, 2027 Certificate Number: 6108.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on metals: Test: Test Method(s): Bend ASTM A370, ASTM E290; ASME SA370 Nick Break/ Fracture Test AWS B4.0, API 1104, CSA Z662 Macro Examination ASTM E340, ASTM E381, ASTM A604/A604M, ASTM A561 Micro Examination ASTM E407 Volume Fraction Analysis ASTM E562, ASTM E407 Tensile, Yield, Elongation, Reduction of Area, and Elevated Temperature (0.222 to 533) kN (RT to 450 ℃) ASTM A370, ASTM B557, ASTM E8/E8M Toughness (Charpy Impact Tester (0 to 325) J, Cooling Chamber – (Room Temperature to -196) ℃ ASTM A370, ASTM E23 Hardness: Vickers (0.1, 0.5, 1, 5 and 10 Kg loads) ASTM E92 Rockwell (B and C) ASTM A370, ASTM E18, ASTM F606/F606M Brinell (10 mm ball, 3000 Kg load) ASTM E10 Pitting/Corrosion ASTM G48 - Method A Detecting Detrimental Intermetallic Phase ASTM A923 Methods A, B, and C Intergranular Attack in Ferritic Stainless Steels ASTM A763 Methods Y, W, and Z Intergranular Attack in Austenitic Stainless Steels ASTM A262 Practices A, E, and F Weld Evaluation and Qualification ASME IX Part QS and QB; API 1104; AWS D1.1/D1.1M Section 4, D1.2/D1.2M Section 3, D1.4/D1.4M Section 6, D1.5/D1.5 M section 5, D1.6/D1.6M section 6, D1.7/D1.7M Section 4, D1.8/D1.8M Sections 5&6, D1.9/D1.9M section 3, D14.1/D14.1M (withdrawn 2017; superseded by D14.0/D14.0M) Section 6, D15.1/D15.1M Sections 10-12, D17.1/D17.1M Section 5, B2.1/B2.1M Sections 4-5, B2.2/B2.2M Sections 4-5; CSA W47.1 Sections 8,9,11; W59 Sections 10, 11, 12
Part 2 of 3
(A2LA Cert. No. 6108.01) 01/29/2026 Page 2 of 2 The accredited test methods are used in determining compliance with the material and weld specifications listed below: ASTM A653M, ASTM D618, CSA G4O.2O, CSA G4O.2I, CSA 2245I, CSA 2245.11, CSA 2245.12, C542245.15, ISO 898 Part l, JIS B 1051 Part 1, SAE J429, J1199, API 5CT, API 5C7, API 5D, API 5L, API 5LC, API 5LS, API 5LX, API 64', API 7, API 7K, API 7-1, API 9A, API I1B, API 12C, API 650, ASME Sec. II, Parts A, B, and C.
Part 3 of 3
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited QUALIMET INC. Edmonton, Alberta, CANADA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 29th day of January 2026. __ _____________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 6108.01 Valid to December 31, 2027
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
Other Locations
2 other sites in this organization
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.