FindTestingLabs
Registers refreshed 2026-10-25.See refresh dates
Spain

SIVERUNE 104

C/ Domingo Sandoval Sabater, nº 5, 30110, Cabezo de Torres, Spain

ENAC 1002/LE1917ISO/IEC 17025Register refreshed 2026-10-10
Request a quoteFree

We check which accredited labs can do it, starting with this one, and send you a short comparison within three working days: who can do it, how fast, and roughly at what cost.

  • No lab gets your contact details until you tell us which ones you want to hear from.
Accredited standards
31
ENAC certificate
1
Site in our directory
1
ENAC accredited scope

What this lab is accredited for

Our reading of the ENAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 31 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO14
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 9862Geosynthetics - Sampling and preparation of test specimens
ISO 9863-1Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
ISO 9864Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
ISO 10319Geosynthetics - Wide-width tensile test
ISO 10320Geosynthetics - Identification on site
ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 12236Geosynthetics - Static puncture test (CBR test)
ISO 13433Geosynthetics - Determination of dynamic perforation (cone drop test)
ISO 18553Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
ASTM13
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D1004
ASTM D1238
ASTM D3895
ASTM D4218
ASTM D4833
ASTM D5199
ASTM D5397
ASTM D5596
ASTM D5994
ASTM D6392
ASTM D6693
ASTM D7466
EN4
EN 1849-2
EN 14196
EN 14575
EN 14576

Read from the scope as published by ENAC. Register refreshed 2026-10-10.

Scope as published by ENAC

5 lines
ENAC

ISO/IEC 17025

Active

1002/LE1917

View scope

Accredited scope, certificate 1002/LE1917

LineMethodMatrixRange
1UNE-EN ISO 9862Geosintéticos-
2ASTM D 4218 A; UNE 53375 A; UNE-EN 1849-2 A; ASTM D5199 A; ASTM D5994/D5994M A; ASTM D7466/D7466M A; UNE-EN ISO 1183-1 A; ASTM D792 A; ISO 18553 APlásticos y Compuestos de Polietileno; Láminas flexibles para impermeabilización; Geomembranas; Geomembranas texturizadas; Plásticos-
3ASTM D5596; UNE-EN ISO 1133-1; ASTM D1238; UNE-EN ISO 527-1; UNE-EN ISO 527-3; ASTM D6693/D6693M; UNE-EN 14575; UNE ISO 34-1; ASTM D1004Polyolefin Geosynthetics; Elastomers and Geosynthetics Barriers; Plastic Film and Sheeting-
4UNE 104304; ASTM D6392; UNE-EN ISO 11357-6; ASTM D3895; UNE-EN 14196; UNE-EN ISO 9864; UNE-EN 14576; UNE-EN ISO 10319; UNE-EN ISO 12236Soldaduras entre láminas sintéticas; Soldaduras de termofusión de geomembranas no reforzadas; Plásticos; Poliolefinas; Geosintéticos-
5UNE-EN ISO 13433; ASTM D4833/D4833M; ASTM D5397; UNE EN ISO 9863-1; UNE-EN ISO 10320; UNE 104481-3-2; UNE 104427; UNE 104425; UNE 104304Geomembranes and Related Products; Polyolefin Geomembranes; Geosynthetics; Welds between synthetic sheets; Extrusion joints between synthetic sheets-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

C/ Domingo Sandoval Sabater, nº 5, Cabezo de Torres, 30110, ES

38.02578, -1.12989

Open in Maps
← All accredited testing labs in Spain

Accreditation data refreshed from the ENAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ENAC entry linked above.