Registers refreshed 2026-11-08.See refresh dates
Sweden

Thomas Concrete Group

Ringögatan 14, 417 07, Göteborg, Sweden

SWEDAC A000669-001SWEDAC a000669-001ISO/IEC 17025Register refreshed 2026-11-08

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
9
SWEDAC certificates
2
Site in our directory
1
SWEDAC accredited scope

What this lab is accredited for

Our reading of the SWEDAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 9 standard numbers and the 5 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 196-1
EN 196-2Methods of testing cement - Part 2: Chemical analysis of cement
EN 196-3
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-6
EN 12390-7Testing hardened concrete - Part 7: Density of hardened concrete
EN 14630

Read from the scope as published by SWEDAC. Register refreshed 2026-11-08.

Scope as published by SWEDAC

2 lines
SWEDAC

ISO/IEC 17025

Active

A000669-001

View on SWEDAC

Accredited scope, certificate A000669-001

LineMethodMatrixRange
1SS-EN ISO/IEC 17025:2018; RILEM AAR-2 TC 106-2:2016; SS-EN 196-3:2016; SS-EN 12390-7:2019/AC:2020; SS 137244:2019; SS-EN 196-2:2013; SS-EN 196-1:2016; SS-EN 14630:2006; SS-EN 1097-6:2022; SS-EN 933-1:2012; SS-EN 12390-6:2023; SS-EN 12390-3:2019Ballast-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

SWEDAC

ISO/IEC 17025

Active

a000669-001

View on SWEDAC

Accredited scope, certificate a000669-001

LineMethodMatrixRange
1SS-EN ISO/IEC 17025:2018 Thomas Concrete Group AB G; SS-EN 14630:2006 Concrete No Compressive strength SS-EN 12390-3:2019 Concrete No Density SS-EN 12390- 7:2019/AC:2020 Concrete No Frost resistance SS 137244:2019 Concrete No Loss on ignition SS-EN 196-2:2013 Cement No avsnitt 5; SS-EN 1097-6:2022 Aggregat No kap; SS-EN 933-1:2012 Aggregat No Setting time SS-EN 196-3:2016 Cement No ej avsnitt 7 Tensile SS-EN 196-1:2016 Cement No Tensile splitting strength SS-EN 12390-6:2023 Concrete No Changes in the scope of accreditation are in bold; ISO/IEC 17025:2018 Thomas Concrete Group AB Göteborg Accreditation number 1321 Centrallaboratoriet A000669-001 Physical properties Technical area Parameter Method Material Field Note Road- and constructions materials Alkali-Reactivity RILEM AAR-2 TC 106- 2:2016 Aggregat No Carbonation depth SS-EN 14630:2006 Concrete No Compressive strength SS-EN 12390-3:2019 Concrete No Density SS-EN 12390- 7:2019/AC:2020 Concrete No Frost resistance SS 137244:2019 Concrete No Loss on ignition SS-EN 196-2:2013 Cement No avsnitt 5Concrete-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Ringögatan 14, Göteborg, 417 07, SE

57.72313, 11.97254

Open in Maps
← All accredited testing labs in Sweden

Accreditation data refreshed from the SWEDAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the SWEDAC entry linked above.