DC Scientific
Glen Burnie, MD, United States
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at DC Scientific?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 4364.01Active
Accredited standards
We have not yet extracted the standard numbers from this lab’s scope document. The scope text we hold is below.
Scope as published by A2LA
5 lines
ISO/IEC 17025
Active4364.01
The scope document we hold says it is valid until 2028-02-29.
Accredited scope, certificate 4364.01
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 5
(A2LA Cert. No. 4364.01) 03/13/2026 Page 1 of 4 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 DC SCIENTIFIC, INC. 6750 McLean Way, Suite D Glen Burnie, MD 21060 Frank Russo Phone: 410 863 1700 CALIBRATION Valid To: February 29, 2028 Certificate Number: 4364.01 In recognition of the successful co mpletion of the A2LA evaluation process (including an assessment of the organization’s compliance with R205 – A2LA’s Calibration Program Requirements), ), accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below to perform the following calibrations 1: I. Fluid Quantities Parameter/Equipment Range CMC2, 4 (±) Comments5 Viscosity Working Viscometers Direct Flow – Suspended Level (Transparent Liquids) <10 mm 2/s (10 to 100) mm2/s (100 to 1000) mm2/s (1000 to 10 000) mm2/s (10 000 to 100 000) mm2/s 0.25 % 0.31 % 0.34 % 0.42 % 0.46 % ASTM D446 ISO 3104 Viscosity Working Viscometers Reverse Flow (Transparent and Opaque) Liquids <10 mm 2/s (10 to 100) mm2/s (100 to 1000) mm2/s (1000 to 10 000) mm2/s (10 000 to 100 000) mm2/s 0.15 % 0.26 % 0.30 % 0.39 % 0.45 % ASTM D446 ISO 3104 Viscosity Working Viscometers Modified Ostwald <10 mm 2/s (10 to 100) mm2/s (100 to 1000) mm2/s (1000 to 10 000) mm2/s (10 000 to 100 000) mm2/s 0.17 % 0.24 % 0.29 % 0.37 % 0.43 % ASTM D446 ISO 3104
Part 2 of 5
(A2LA Cert. No. 4364.01) 03/13/2026 Page 2 of 4 II. Mechanical Parameter/Equipment Range CMC2, 4 (±) Comments Petroleum Product Analyzer Calibrations for: Dry Vapor Pressure Equivalent (DVPE) 3 Vapor-Liquid Ratio Temperature Determination (VLR) 3 Vapor Pressure of Crude Oil (VPCR x)3 Distillation at Atmospheric Pressure 3 Flash Point by Pensky- Martens Closed Cup 3 Color by Automatic Tristimulus Method 3 Distillation at Reduced Pressure3 Smoke Point of Aviation Turbine Fuel (Automatic Method) 3 Thermal Oxidation Stability of Aviation Turbine Fuels 3 Color of Liquids Using Tristimulus Colorimetry 3 Vapor Pressure (Triple Expansion Method) 3 Micro Distillation 3 (1.0 to 18.6) psi (36 to 80) °C (97 to 176) °F (25 to 180) kPa at 37.8 °C (0 to 400) °C (40 to 370) °C Saybolt D156 (-16 to +30) ASTM D1500 (0 to 8) (0 to 400) °C (0 to 50) mmHg Up to 55 mm (0 to 400) °C (0 to 1200) nm Pt-Co D1209 (0 to 100) (1.0 to 21.0) psi (20 to 400) °C 1.0 % 1.1 % 1.0 % 0.66 % 1.1 % 0.8 % 1.9 % 0.8 % 0.8 % 1.4 % 1.3 % 1.3 % ASTM D5191 ASTM D5188 ASTM D6377 ASTM D86 ASTM D93 ASTM D6045 ASTM D1160 ASTM D1322 ASTM D3241 ASTM D5386 ASTM D6378 ASTM D7345
Part 3 of 5
(A2LA Cert. No. 4364.01) 03/13/2026 Page 3 of 4 SATELLITE LABORATORY DC SCIENTIFIC, INC. 3520 South Sam Houston Parkway East, Suite 400 Houston, TX 77047 Frank Russo Phone: 410 863 1700 II. Mechanical Parameter/Equipment Range CMC2, 4 (±) Comments Petroleum Product Analyzer Calibrations for: Dry Vapor Pressure Equivalent (DVPE) 3 Vapor-Liquid Ratio Temperature Determination (VLR) 3 Vapor Pressure of Crude Oil (VPCR x)3 Distillation at Atmospheric Pressure 3 Flash Point by Pensky- Martens Closed Cup 3 Color by Automatic Tristimulus Method 3 Distillation at Reduced Pressure3 Smoke Point of Aviation Turbine Fuel (Automatic Method) 3 Thermal Oxidation Stability of Aviation Turbine Fuels 3 Color of Liquids Using Tristimulus Colorimetry 3 Vapor Pressure (Triple Expansion Method) 3 Micro Distillation 3 (1.0 to 18.6) psi (36 to 80) °C (97 to 176) °F (25 to 180) kPa at 37.8 °C (0 to 400) °C (40 to 370) °C Saybolt D156 (-16 to +30) ASTM D1500 (0 to 8) (0 to 400) °C (0 to 50) mmHg Up to 55 mm (0 to 400) °C (0 to 1200) nm Pt-Co D1209 (0 to 100) (2.0 to 21.0) psi (20 to 400) °C 1.0 % 1.1 % 1.0 % 0.66 % 1.1 % 0.8 % 1.9 % 0.8 % 0.8 % 1.4 % 1.3 % 1.3 % ASTM D5191 ASTM D5188 ASTM D6377 ASTM D86 ASTM D93 ASTM D6045 ASTM D1160 ASTM D1322 ASTM D3241 ASTM D5386 ASTM D6378 ASTM D7345 _______________________________
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
Other Locations
2 other sites in this organization
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.