Registers refreshed 2026-11-08.See refresh dates
Germany

HQM induserv

Johann-Esche-Straße 1, 09120, Chemnitz, Germany

DAKKS D-PL-11284-01-00DAKKS D-PL-11284-01-01DAKKS D-PL-11284-01-02and 3 moreISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
47
DAKKS certificates
6
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 47 standard numbers and the 32 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO29
ISO 178Plastics - Determination of flexural properties
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
ISO 2409Paints and varnishes - Cross-cut test
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 3887Steels - Determination of the depth of decarburization
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 4405Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the gravimetric method
Show all 29
ISO 4406Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 10893-5Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 16232Road vehicles - Cleanliness of components and systems
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 18203Steel - Determination of the thickness of surface-hardened layers
ISO 20485Non-destructive testing - Leak testing - Tracer gas method
ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
DIN10
DIN 50602
DIN 51006
DIN 51360-2
DIN 51368
DIN 51369
DIN 51757
DIN 53015
DIN 53504
DIN 53505
DIN 75200
EN8
EN 571-1
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 1593
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 13068-3
EN 13184
EN 13185

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

20 lines
DAKKS

ISO/IEC 17025

Active

D-PL-11284-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11284-01-01

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11284-01-02

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11284-01-03

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11284-01-04

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-11284-01-05

View scope

Location

Johann-Esche-Straße 1, Chemnitz, 09120, DE

50.81020, 12.90743

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.