Registers refreshed 2026-11-08.See refresh dates
Netherlands

Labortech Testing Solutions

Euroweg 18, 2988 CM, RIDDERKERK, Netherlands

RvA L691ISO/IEC 17025Register refreshed 2026-11-08

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
46
RvA certificate
1
Site in our directory
1
RvA accredited scope

What this lab is accredited for

Our reading of the RvA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 46 standard numbers and the 34 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO18
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 783Metallic materials - Tensile testing at elevated temperature
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 5817Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 7438Metallic materials - Bend test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9017Destructive tests on welds in metallic materials - Fracture test
Show all 18
ISO 9018Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
ISO 12135Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 14555Welding - Arc stud welding of metallic materials
ISO 15630
ISO 15653Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ASTM15
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A751
ASTM A770
ASTM B557
ASTM E3Standard Guide for Preparation of Metallographic Specimens
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E290Standard Test Methods for Bend Testing of Material for Ductility
ASTM E407Standard Practice for Microetching Metals and Alloys
ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1290
EN5
EN 895
EN 10002-5
EN 10080
EN 10164
EN 14726
ISO 6506 series3
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6506-2Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 6506-4Metallic materials - Brinell hardness test - Part 4: Table of hardness values
ISO 6507 series3
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6507-2Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
ISO 6507-4Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
Other standards2
BS 7448-1
NEN 6008

Read from the RvA scope document we downloaded on 2026-02-12. Register refreshed 2026-11-08.

Scope as published by RvA

3 lines
RvA

ISO/IEC 17025

Active

L691

The scope document we hold says it is valid until 2027-04-01.

View scope

Accredited scope, certificate L691

LineMethodMatrixRange
1ISO 4136, ISO 15630, ISO 5178, ISO 6892-1, ISO 9018, ISO 14555, EN 895, EN 10164, EN 10080, NEN 6008, ASTM E8, ASTM A370, ASTM B557, ASTM A770, EN 10002-5, ASTM E21, ISO 6892-2, ISO 783:1999Metal-
2EN ISO/IEC 17025:2017; ISO 9016; ISO 148-1; ASTM A370; ASTM E23; ASME IX (QW 171); ASTM A370; ASTM E290; ASME IX; AWS D1.1/D1.1M; AWS D1.2/D1.2M; AWS D1.6/D1.6M; ISO 5173; ISO 7438; ISO 12135; ISO 15653; BS 7448-1 t/m 4; ASTM E1290; DNV OS F101; DNV RP F108; EEMUA 158; ISO 6507-1; ISO 6507-2; ISO 6507-4; ISO 9015-1; ASTM E92; ISO 6506-1; ISO6506-2; ISO 6506-4; ASTM E415; ASTM A751; ASTM E1086; EN 14726; ASTM E562; ISO 9017; API 1104; ASME IX; AWS D1.1/D1.1M; AWS D1.2/D1.2M; AWS D1.6/D1.6M ASME VIII; ASME IX; ISO 5817; ISO 9017; ISO 17639; ASTM E3; ASTM E407Metal-
3EN ISO/IEC 17025:2017; ISO 5817; ISO 9017; ISO 17639; ASTM E3; ASTM E407Metal-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Euroweg 18, RIDDERKERK, 2988 CM, NL

51.87327, 4.55711

Open in Maps
← All accredited testing labs in Netherlands

Labs with overlapping accredited scope in Netherlands

Accreditation data refreshed from the RvA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the RvA entry linked above.