FindTestingLabs
Registers refreshed 2026-10-18.See refresh dates
Germany

EMC Test NRW GmbH electromagnetic compatibility

Emil-Figge-Straße 76, 44227, Dortmund, Germany

DAKKS|D-PL-12012-01-03DAKKS|D-PL-12012-01-00DAKKS|D-PL-12012-01-02DAKKS|D-PL-12012-01-01ISO/IEC 17025Register refreshed 2026-10-09
Certificates
4
Scope items
49
Standards
122
Locations
1

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Follow this lab

We will email you if this laboratory’s accreditation status or scope changes. No newsletter, only changes.

Work at EMC Test NRW GmbH electromagnetic compatibility?

Claim this profile to keep it accurate.

Register record

DAKKSRefreshed
D-PL-12012-01-03Active
D-PL-12012-01-00Active
D-PL-12012-01-02Active
D-PL-12012-01-01Active

Accredited standards

122

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

IEC

IEC 60335-1Household and similar electrical appliances - Safety - Part 1: General requirementsCertificate says EN 60335-1. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 21 (DAKKS D-PL-12012-01-01)

EN 60335-1; EN 60335-2-102; EN 62135-2; EN 62920; IEC 60335-1

IEC 60335-2-102Name not checked yet
As written on the certificate · Line 21 (DAKKS D-PL-12012-01-01)

EN 60335-1; EN 60335-2-102; EN 62135-2; EN 62920; IEC 60335-1

IEC 60601-1-2Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and testsCertificate says EN 60601-1-2. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 2 (DAKKS D-PL-12012-01-03)

ISO 7176-21; EN 60601-1-2; EN 61326-2-6; IEC 60601-1-2; IEC 61326-2-6

As written on the certificate · Line 3 (DAKKS D-PL-12012-01-03)

ISO 7176-21 : 2009-04 Wheelchairs - Part 21; EN 60601-1-2; EN 61326-2-6; EN 61326-1; IEC 60601-1-2

IEC 60669-2-1Name not checked yet
As written on the certificate · Line 13 (DAKKS D-PL-12012-01-01)

EN 55103-2; EN 60669-2-1; EN 60730-1; EN 60730-2-5; EN 60730-2-6

IEC 60974-10Name not checked yet
As written on the certificate · Line 15 (DAKKS D-PL-12012-01-01)

EN 60947-4-3; EN 60974-10; IEC 60947-4-; IEC 60947-5-2; IEC 60974-10

IEC 61131-2Name not checked yet
As written on the certificate · Line 17 (DAKKS D-PL-12012-01-01)

EN 61000-3-12; EN 61131-2; EN 61000-4-; EN 61204-3; en 60

IEC 61204-3Name not checked yet
As written on the certificate · Line 17 (DAKKS D-PL-12012-01-01)

EN 61000-3-12; EN 61131-2; EN 61000-4-; EN 61204-3; en 60

IEC 61543Name not checked yet
As written on the certificate · Line 20 (DAKKS D-PL-12012-01-01)

EN 61326-3-1; EN 61000-4-16; EN 61543; EN 61547; EN 61800-5-2

IEC 61547Equipment for general lighting purposes - EMC immunity requirementsCertificate says EN 61547. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 20 (DAKKS D-PL-12012-01-01)

EN 61326-3-1; EN 61000-4-16; EN 61543; EN 61547; EN 61800-5-2

IEC 61557-8Name not checked yet
As written on the certificate · Line 19 (DAKKS D-PL-12012-01-01)

Isolationsüberwachungsgeräte gemäß IEC 61557-8 und Geräte zur Isolationsfehlerortung gemäß IEC 61557-9; Isolationsüberwachungsgeräte nach IEC 61557-8 und Geräte zur Isolationsfehlerortung nach IEC 61557-9; EN 61326-2-4; EN 61326-2-5; IEC 61326-2-3

IEC 61557-9Name not checked yet
As written on the certificate · Line 19 (DAKKS D-PL-12012-01-01)

Isolationsüberwachungsgeräte gemäß IEC 61557-8 und Geräte zur Isolationsfehlerortung gemäß IEC 61557-9; Isolationsüberwachungsgeräte nach IEC 61557-8 und Geräte zur Isolationsfehlerortung nach IEC 61557-9; EN 61326-2-4; EN 61326-2-5; IEC 61326-2-3

IEC 61800-5-2Name not checked yet
As written on the certificate · Line 20 (DAKKS D-PL-12012-01-01)

EN 61326-3-1; EN 61000-4-16; EN 61543; EN 61547; EN 61800-5-2

IEC 61851-21-1Name not checked yet
As written on the certificate · Line 29 (DAKKS D-PL-12012-01-01)

DIN EN IEC 61851-21- 2:2021 EN IEC 61851-21-2:2021 Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2; DIN EN IEC 61980-1:2021; EN 61851-21-1; EN 62752; EN 55012

IEC 61851-21-2Name not checked yet
As written on the certificate · Line 29 (DAKKS D-PL-12012-01-01)

DIN EN IEC 61851-21- 2:2021 EN IEC 61851-21-2:2021 Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2; DIN EN IEC 61980-1:2021; EN 61851-21-1; EN 62752; EN 55012

IEC 61980-1Name not checked yet
As written on the certificate · Line 29 (DAKKS D-PL-12012-01-01)

DIN EN IEC 61851-21- 2:2021 EN IEC 61851-21-2:2021 Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2; DIN EN IEC 61980-1:2021; EN 61851-21-1; EN 62752; EN 55012

IEC 62135-2Name not checked yet
As written on the certificate · Line 21 (DAKKS D-PL-12012-01-01)

EN 60335-1; EN 60335-2-102; EN 62135-2; EN 62920; IEC 60335-1

IEC 62233Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
As written on the certificate · Line 37 (DAKKS D-PL-12012-01-01)

EN 50665; EN 62233; EN 62479; EN 62493; EN 50413

IEC 62311Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)Certificate says EN 62311. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 35 (DAKKS D-PL-12012-01-01)

DIN EN 50289-1-6:2002 Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 1-6; DIN EN 61000-5-7:2001; EN 50289-1-6; EN 61000-5-7; EN 62311

As written on the certificate · Line 36 (DAKKS D-PL-12012-01-01)

EN 62311; EN 50413; EN 50364; EN 50500; EN 50663

As written on the certificate · Line 38 (DAKKS D-PL-12012-01-01)

EN 62822-2; EN 62311; EN 50413; IEC 62764-1; IEC 62822-1

As written on the certificate · Line 39 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-11:2005; DIN EN 61000-3-11:2001; EN 62311; EN 50413; EN 61000-4-5

As written on the certificate · Line 41 (DAKKS D-PL-12012-01-01)

ISO 11452-4:2011; EN 62311; EN 50364; EN 50445; IEC 62311

IEC 62479Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
As written on the certificate · Line 37 (DAKKS D-PL-12012-01-01)

EN 50665; EN 62233; EN 62479; EN 62493; EN 50413

IEC 62493Name not checked yet
As written on the certificate · Line 37 (DAKKS D-PL-12012-01-01)

EN 50665; EN 62233; EN 62479; EN 62493; EN 50413

IEC 62752Name not checked yet
As written on the certificate · Line 29 (DAKKS D-PL-12012-01-01)

DIN EN IEC 61851-21- 2:2021 EN IEC 61851-21-2:2021 Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2; DIN EN IEC 61980-1:2021; EN 61851-21-1; EN 62752; EN 55012

IEC 62764-1Name not checked yet
As written on the certificate · Line 38 (DAKKS D-PL-12012-01-01)

EN 62822-2; EN 62311; EN 50413; IEC 62764-1; IEC 62822-1

IEC 62822-1Name not checked yet
As written on the certificate · Line 38 (DAKKS D-PL-12012-01-01)

EN 62822-2; EN 62311; EN 50413; IEC 62764-1; IEC 62822-1

IEC 62822-2Name not checked yet
As written on the certificate · Line 38 (DAKKS D-PL-12012-01-01)

EN 62822-2; EN 62311; EN 50413; IEC 62764-1; IEC 62822-1

IEC 62920Name not checked yet
As written on the certificate · Line 21 (DAKKS D-PL-12012-01-01)

EN 60335-1; EN 60335-2-102; EN 62135-2; EN 62920; IEC 60335-1

IEC 63044-5-2Name not checked yet
As written on the certificate · Line 22 (DAKKS D-PL-12012-01-01)

EN 301; en 9; IEC 63044-5-2; IEC 63044-5-3

IEC 63044-5-3Name not checked yet
As written on the certificate · Line 22 (DAKKS D-PL-12012-01-01)

EN 301; en 9; IEC 63044-5-2; IEC 63044-5-3

IEC 61000 series

IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connectionCertificate says EN 61000-3-3. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 16 (DAKKS D-PL-12012-01-01)

EN 61000-3-3; IEC 61000-3-3; IEC 61000-3-11

IEC 61000-3-11Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
As written on the certificate · Line 16 (DAKKS D-PL-12012-01-01)

EN 61000-3-3; IEC 61000-3-3; IEC 61000-3-11

As written on the certificate · Line 39 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-11:2005; DIN EN 61000-3-11:2001; EN 62311; EN 50413; EN 61000-4-5

IEC 61000-3-12Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phaseCertificate says EN 61000-3-12. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 17 (DAKKS D-PL-12012-01-01)

EN 61000-3-12; EN 61131-2; EN 61000-4-; EN 61204-3; en 60

IEC 61000-4Name not checked yet
As written on the certificate · Line 17 (DAKKS D-PL-12012-01-01)

EN 61000-3-12; EN 61131-2; EN 61000-4-; EN 61204-3; en 60

IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
As written on the certificate · Line 3 (DAKKS D-PL-12012-01-01)

en 1; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5

IEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity testCertificate says EN 61000-4-3. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 3 (DAKKS D-PL-12012-01-01)

en 1; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5

IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
As written on the certificate · Line 3 (DAKKS D-PL-12012-01-01)

en 1; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5

IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
As written on the certificate · Line 3 (DAKKS D-PL-12012-01-01)

en 1; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5

As written on the certificate · Line 39 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-11:2005; DIN EN 61000-3-11:2001; EN 62311; EN 50413; EN 61000-4-5

IEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fieldsCertificate says EN 61000-4-6. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 4 (DAKKS D-PL-12012-01-01)

EN 61000-4-6; EN 61000-4-8; EN 61000-4-9; EN 61000-4-11; en 60Hz-Systeme

IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
As written on the certificate · Line 4 (DAKKS D-PL-12012-01-01)

EN 61000-4-6; EN 61000-4-8; EN 61000-4-9; EN 61000-4-11; en 60Hz-Systeme

IEC 61000-4-9Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test
As written on the certificate · Line 4 (DAKKS D-PL-12012-01-01)

EN 61000-4-6; EN 61000-4-8; EN 61000-4-9; EN 61000-4-11; en 60Hz-Systeme

IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
As written on the certificate · Line 4 (DAKKS D-PL-12012-01-01)

EN 61000-4-6; EN 61000-4-8; EN 61000-4-9; EN 61000-4-11; en 60Hz-Systeme

As written on the certificate · Line 39 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-11:2005; DIN EN 61000-3-11:2001; EN 62311; EN 50413; EN 61000-4-5

IEC 61000-4-12Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
As written on the certificate · Line 10 (DAKKS D-PL-12012-01-01)

DIN EN 50370-1:2006; DIN EN 50370-2:2003; EN 50121-5; EN 61000-4-12; EN 50130-4

IEC 61000-4-13Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
As written on the certificate · Line 5 (DAKKS D-PL-12012-01-01)

EN 61000-4-13; EN 61000-; EN 61000-4-14; EN 61000-4-16; EN 61000-4-21

IEC 61000-4-14Name not checked yet
As written on the certificate · Line 5 (DAKKS D-PL-12012-01-01)

EN 61000-4-13; EN 61000-; EN 61000-4-14; EN 61000-4-16; EN 61000-4-21

IEC 61000-4-16Name not checked yet
As written on the certificate · Line 5 (DAKKS D-PL-12012-01-01)

EN 61000-4-13; EN 61000-; EN 61000-4-14; EN 61000-4-16; EN 61000-4-21

As written on the certificate · Line 8 (DAKKS D-PL-12012-01-01)

EN 61000-6-3; EN 61000-6-7; EN 61000-4-16; IEC 61000-6-3; IEC 61000-6-

As written on the certificate · Line 20 (DAKKS D-PL-12012-01-01)

EN 61326-3-1; EN 61000-4-16; EN 61543; EN 61547; EN 61800-5-2

IEC 61000-4-21Name not checked yet
As written on the certificate · Line 5 (DAKKS D-PL-12012-01-01)

EN 61000-4-13; EN 61000-; EN 61000-4-14; EN 61000-4-16; EN 61000-4-21

IEC 61000-4-27Name not checked yet
As written on the certificate · Line 6 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-27:2009; DIN EN 61000-4-29:2001; EN 61000-4-27; EN 61000-; EN 61000-4-28

IEC 61000-4-28Name not checked yet
As written on the certificate · Line 6 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-27:2009; DIN EN 61000-4-29:2001; EN 61000-4-27; EN 61000-; EN 61000-4-28

IEC 61000-4-29Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
As written on the certificate · Line 6 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-27:2009; DIN EN 61000-4-29:2001; EN 61000-4-27; EN 61000-; EN 61000-4-28

IEC 61000-5-7Name not checked yet
As written on the certificate · Line 35 (DAKKS D-PL-12012-01-01)

DIN EN 50289-1-6:2002 Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 1-6; DIN EN 61000-5-7:2001; EN 50289-1-6; EN 61000-5-7; EN 62311

IEC 61000-6-1Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environmentsCertificate says EN 61000-6-1. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 7 (DAKKS D-PL-12012-01-01)

EN 55016-2-1; EN 55016-2-3; IEC 61000-6-1; IEC 61000-6-2

As written on the certificate · Line 40 (DAKKS D-PL-12012-01-01)

DIN EN 61000-6-2:2006; EN 61000-6-1; EN 61000-6-2; EN 61000-6-4; EN 55024

IEC 61000-6-2Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
As written on the certificate · Line 7 (DAKKS D-PL-12012-01-01)

EN 55016-2-1; EN 55016-2-3; IEC 61000-6-1; IEC 61000-6-2

As written on the certificate · Line 40 (DAKKS D-PL-12012-01-01)

DIN EN 61000-6-2:2006; EN 61000-6-1; EN 61000-6-2; EN 61000-6-4; EN 55024

IEC 61000-6-3Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environmentsCertificate says EN 61000-6-3. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 8 (DAKKS D-PL-12012-01-01)

EN 61000-6-3; EN 61000-6-7; EN 61000-4-16; IEC 61000-6-3; IEC 61000-6-

IEC 61000-6-4Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
As written on the certificate · Line 40 (DAKKS D-PL-12012-01-01)

DIN EN 61000-6-2:2006; EN 61000-6-1; EN 61000-6-2; EN 61000-6-4; EN 55024

IEC 61000-6-7Name not checked yet
As written on the certificate · Line 8 (DAKKS D-PL-12012-01-01)

EN 61000-6-3; EN 61000-6-7; EN 61000-4-16; IEC 61000-6-3; IEC 61000-6-

EN

EN 08-01-05Name not checked yet
As written on the certificate · Line 3 (DAKKS D-PL-12012-01-02)

en 08-01-05

EN 60Name not checked yet
As written on the certificate · Line 4 (DAKKS D-PL-12012-01-01)

EN 61000-4-6; EN 61000-4-8; EN 61000-4-9; EN 61000-4-11; en 60Hz-Systeme

As written on the certificate · Line 17 (DAKKS D-PL-12012-01-01)

EN 61000-3-12; EN 61131-2; EN 61000-4-; EN 61204-3; en 60

EN 12015Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
As written on the certificate · Line 9 (DAKKS D-PL-12012-01-01)

en 3; EN 12015; EN 12016; EN 50121-1; EN 50121-2

EN 12016Name not checked yet
As written on the certificate · Line 9 (DAKKS D-PL-12012-01-01)

en 3; EN 12015; EN 12016; EN 50121-1; EN 50121-2

EN 15194Name not checked yet
As written on the certificate · Line 31 (DAKKS D-PL-12012-01-01)

DIN EN 15194:2018; ISO 11451-4:2013 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4; ISO 11451-4:2022; ISO 14982:2010; ISO 14982:1998

EN 50130-4Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
As written on the certificate · Line 10 (DAKKS D-PL-12012-01-01)

DIN EN 50370-1:2006; DIN EN 50370-2:2003; EN 50121-5; EN 61000-4-12; EN 50130-4

EN 50289-1-6Name not checked yet
As written on the certificate · Line 35 (DAKKS D-PL-12012-01-01)

DIN EN 50289-1-6:2002 Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 1-6; DIN EN 61000-5-7:2001; EN 50289-1-6; EN 61000-5-7; EN 62311

EN 50364Name not checked yet
As written on the certificate · Line 36 (DAKKS D-PL-12012-01-01)

EN 62311; EN 50413; EN 50364; EN 50500; EN 50663

As written on the certificate · Line 41 (DAKKS D-PL-12012-01-01)

ISO 11452-4:2011; EN 62311; EN 50364; EN 50445; IEC 62311

EN 50370-1Name not checked yet
As written on the certificate · Line 10 (DAKKS D-PL-12012-01-01)

DIN EN 50370-1:2006; DIN EN 50370-2:2003; EN 50121-5; EN 61000-4-12; EN 50130-4

EN 50370-2Name not checked yet
As written on the certificate · Line 10 (DAKKS D-PL-12012-01-01)

DIN EN 50370-1:2006; DIN EN 50370-2:2003; EN 50121-5; EN 61000-4-12; EN 50130-4

EN 50413Name not checked yet
As written on the certificate · Line 36 (DAKKS D-PL-12012-01-01)

EN 62311; EN 50413; EN 50364; EN 50500; EN 50663

As written on the certificate · Line 37 (DAKKS D-PL-12012-01-01)

EN 50665; EN 62233; EN 62479; EN 62493; EN 50413

As written on the certificate · Line 38 (DAKKS D-PL-12012-01-01)

EN 62822-2; EN 62311; EN 50413; IEC 62764-1; IEC 62822-1

As written on the certificate · Line 39 (DAKKS D-PL-12012-01-01)

DIN EN 61000-4-11:2005; DIN EN 61000-3-11:2001; EN 62311; EN 50413; EN 61000-4-5

EN 50445Name not checked yet
As written on the certificate · Line 41 (DAKKS D-PL-12012-01-01)

ISO 11452-4:2011; EN 62311; EN 50364; EN 50445; IEC 62311

EN 50498Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

EN 50500Name not checked yet
As written on the certificate · Line 36 (DAKKS D-PL-12012-01-01)

EN 62311; EN 50413; EN 50364; EN 50500; EN 50663

EN 50663Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz)
As written on the certificate · Line 36 (DAKKS D-PL-12012-01-01)

EN 62311; EN 50413; EN 50364; EN 50500; EN 50663

EN 50665Name not checked yet
As written on the certificate · Line 37 (DAKKS D-PL-12012-01-01)

EN 50665; EN 62233; EN 62479; EN 62493; EN 50413

EN 55103-2Name not checked yet
As written on the certificate · Line 13 (DAKKS D-PL-12012-01-01)

EN 55103-2; EN 60669-2-1; EN 60730-1; EN 60730-2-5; EN 60730-2-6

CISPR

CISPR 11Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurementCertificate says EN 55011. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 11 (DAKKS D-PL-12012-01-01)

DIN EN 55011:2018; DIN EN 55011:2022 EN 55011:2016; DIN EN 55014-1:2018; DIN EN IEC 55014-1:2022 EN IEC 55014-1:2021; DIN EN 55014-2:2016

CISPR 12Vehicles, boats and devices with internal combustion engines or traction batteries - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receiversCertificate says EN 55012. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 29 (DAKKS D-PL-12012-01-01)

DIN EN IEC 61851-21- 2:2021 EN IEC 61851-21-2:2021 Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2; DIN EN IEC 61980-1:2021; EN 61851-21-1; EN 62752; EN 55012

CISPR 14-1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: EmissionCertificate says EN 55014-1, IEC 55014-1. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 11 (DAKKS D-PL-12012-01-01)

DIN EN 55011:2018; DIN EN 55011:2022 EN 55011:2016; DIN EN 55014-1:2018; DIN EN IEC 55014-1:2022 EN IEC 55014-1:2021; DIN EN 55014-2:2016

CISPR 14-2Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standardCertificate says EN 55014-2, IEC 55014-2. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 11 (DAKKS D-PL-12012-01-01)

DIN EN 55011:2018; DIN EN 55011:2022 EN 55011:2016; DIN EN 55014-1:2018; DIN EN IEC 55014-1:2022 EN IEC 55014-1:2021; DIN EN 55014-2:2016

As written on the certificate · Line 12 (DAKKS D-PL-12012-01-01)

DIN EN IEC 55014-2:2022 EN IEC 55014-2:2021; DIN EN IEC 55015:2020; EN 55032; EN 55035; IEC 55014-2

CISPR 15Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipmentCertificate says IEC 55015. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 12 (DAKKS D-PL-12012-01-01)

DIN EN IEC 55014-2:2022 EN IEC 55014-2:2021; DIN EN IEC 55015:2020; EN 55032; EN 55035; IEC 55014-2

CISPR 16-2-1Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurementsCertificate says EN 55016-2-1. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 7 (DAKKS D-PL-12012-01-01)

EN 55016-2-1; EN 55016-2-3; IEC 61000-6-1; IEC 61000-6-2

CISPR 16-2-3Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurementsCertificate says EN 55016-2-3. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 7 (DAKKS D-PL-12012-01-01)

EN 55016-2-1; EN 55016-2-3; IEC 61000-6-1; IEC 61000-6-2

CISPR 24Information technology equipment - Immunity characteristics - Limits and methods of measurementCertificate says EN 55024. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 40 (DAKKS D-PL-12012-01-01)

DIN EN 61000-6-2:2006; EN 61000-6-1; EN 61000-6-2; EN 61000-6-4; EN 55024

CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receiversCertificate says EN 55025. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirementsCertificate says EN 55032. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 12 (DAKKS D-PL-12012-01-01)

DIN EN IEC 55014-2:2022 EN IEC 55014-2:2021; DIN EN IEC 55015:2020; EN 55032; EN 55035; IEC 55014-2

CISPR 35Electromagnetic compatibility of multimedia equipment - Immunity requirementsCertificate says EN 55035. Probably the same standard; not checked against the EN document.
As written on the certificate · Line 12 (DAKKS D-PL-12012-01-01)

DIN EN IEC 55014-2:2022 EN IEC 55014-2:2021; DIN EN IEC 55015:2020; EN 55032; EN 55035; IEC 55014-2

ISO 11452 series

ISO 11452-1Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

As written on the certificate · Line 41 (DAKKS D-PL-12012-01-01)

ISO 11452-4:2011; EN 62311; EN 50364; EN 50445; IEC 62311

ISO 11452-5Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

ISO 11452-7Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

ISO 11452-9Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

ISO 11452-10Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

ISO 11452-11Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber
As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

IEC 61326 series

IEC 61326-1Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
As written on the certificate · Line 3 (DAKKS D-PL-12012-01-03)

ISO 7176-21 : 2009-04 Wheelchairs - Part 21; EN 60601-1-2; EN 61326-2-6; EN 61326-1; IEC 60601-1-2

IEC 61326-2-1Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
As written on the certificate · Line 18 (DAKKS D-PL-12012-01-01)

EN 61326-2-1; EN 61326-2-2; EN 61326-2-3; IEC 61326-2-1; IEC 61326-2-

IEC 61326-2-2Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems
As written on the certificate · Line 18 (DAKKS D-PL-12012-01-01)

EN 61326-2-1; EN 61326-2-2; EN 61326-2-3; IEC 61326-2-1; IEC 61326-2-

IEC 61326-2-3Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
As written on the certificate · Line 18 (DAKKS D-PL-12012-01-01)

EN 61326-2-1; EN 61326-2-2; EN 61326-2-3; IEC 61326-2-1; IEC 61326-2-

As written on the certificate · Line 19 (DAKKS D-PL-12012-01-01)

Isolationsüberwachungsgeräte gemäß IEC 61557-8 und Geräte zur Isolationsfehlerortung gemäß IEC 61557-9; Isolationsüberwachungsgeräte nach IEC 61557-8 und Geräte zur Isolationsfehlerortung nach IEC 61557-9; EN 61326-2-4; EN 61326-2-5; IEC 61326-2-3

IEC 61326-2-4Name not checked yet
As written on the certificate · Line 19 (DAKKS D-PL-12012-01-01)

Isolationsüberwachungsgeräte gemäß IEC 61557-8 und Geräte zur Isolationsfehlerortung gemäß IEC 61557-9; Isolationsüberwachungsgeräte nach IEC 61557-8 und Geräte zur Isolationsfehlerortung nach IEC 61557-9; EN 61326-2-4; EN 61326-2-5; IEC 61326-2-3

IEC 61326-2-5Name not checked yet
As written on the certificate · Line 19 (DAKKS D-PL-12012-01-01)

Isolationsüberwachungsgeräte gemäß IEC 61557-8 und Geräte zur Isolationsfehlerortung gemäß IEC 61557-9; Isolationsüberwachungsgeräte nach IEC 61557-8 und Geräte zur Isolationsfehlerortung nach IEC 61557-9; EN 61326-2-4; EN 61326-2-5; IEC 61326-2-3

IEC 61326-2-6Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment
As written on the certificate · Line 2 (DAKKS D-PL-12012-01-03)

ISO 7176-21; EN 60601-1-2; EN 61326-2-6; IEC 60601-1-2; IEC 61326-2-6

As written on the certificate · Line 3 (DAKKS D-PL-12012-01-03)

ISO 7176-21 : 2009-04 Wheelchairs - Part 21; EN 60601-1-2; EN 61326-2-6; EN 61326-1; IEC 60601-1-2

IEC 61326-3-1Name not checked yet
As written on the certificate · Line 20 (DAKKS D-PL-12012-01-01)

EN 61326-3-1; EN 61000-4-16; EN 61543; EN 61547; EN 61800-5-2

IEC 60730 series

IEC 60730-1Automatic electrical controls - Part 1: General requirements
As written on the certificate · Line 13 (DAKKS D-PL-12012-01-01)

EN 55103-2; EN 60669-2-1; EN 60730-1; EN 60730-2-5; EN 60730-2-6

IEC 60730-2-5Name not checked yet
As written on the certificate · Line 13 (DAKKS D-PL-12012-01-01)

EN 55103-2; EN 60669-2-1; EN 60730-1; EN 60730-2-5; EN 60730-2-6

IEC 60730-2-6Name not checked yet
As written on the certificate · Line 13 (DAKKS D-PL-12012-01-01)

EN 55103-2; EN 60669-2-1; EN 60730-1; EN 60730-2-5; EN 60730-2-6

IEC 60730-2-8Name not checked yet
As written on the certificate · Line 14 (DAKKS D-PL-12012-01-01)

EN 60947-1; IEC 60730-2-; IEC 60730-2-8; IEC 60730-2-9; IEC 60730-2-14

IEC 60730-2-9Name not checked yet
As written on the certificate · Line 14 (DAKKS D-PL-12012-01-01)

EN 60947-1; IEC 60730-2-; IEC 60730-2-8; IEC 60730-2-9; IEC 60730-2-14

IEC 60730-2-14Name not checked yet
As written on the certificate · Line 14 (DAKKS D-PL-12012-01-01)

EN 60947-1; IEC 60730-2-; IEC 60730-2-8; IEC 60730-2-9; IEC 60730-2-14

ISO

ISO 7176-21Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
As written on the certificate · Line 2 (DAKKS D-PL-12012-01-03)

ISO 7176-21; EN 60601-1-2; EN 61326-2-6; IEC 60601-1-2; IEC 61326-2-6

As written on the certificate · Line 3 (DAKKS D-PL-12012-01-03)

ISO 7176-21 : 2009-04 Wheelchairs - Part 21; EN 60601-1-2; EN 61326-2-6; EN 61326-1; IEC 60601-1-2

ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
As written on the certificate · Line 26 (DAKKS D-PL-12012-01-01)

ISO 10605:2008; EN 301; EN 302; EN 303

As written on the certificate · Line 27 (DAKKS D-PL-12012-01-01)

ISO 10605:2008 Technical Corrigendum 1:2010 Road vehicles - Test methods for electrical disturbances from electrostatic discharge EMV ISO 10605 AMD1:2014; ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology EMV ISO 11452-2:2019; ISO 11452-4:2020; ISO 11452-5:2002 Straßenfahrzeuge - Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 5: Streifenleitung nur Prüfungen mit der 90 Ohm StreifenIeitung EMV ISO 11452-7:2003 ISO 11452-7 AMD1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7; ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMV ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9

ISO 14982Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
As written on the certificate · Line 31 (DAKKS D-PL-12012-01-01)

DIN EN 15194:2018; ISO 11451-4:2013 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4; ISO 11451-4:2022; ISO 14982:2010; ISO 14982:1998

ISO 16750-1Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General
As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
As written on the certificate · Line 28 (DAKKS D-PL-12012-01-01)

ISO 11452-9:2021; ISO 11452-10:2009 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range EMV ISO 11452-11:2010 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber EMV EN 55025:2017; ISO 16750-1:2018 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 1: Allgemeines EMV ISO 16750-2:2012 Straßenfahrzeuge - Umgebungsbedingungen und Prüfungen für elektrische und elektronische Ausrüstungen - Teil 2: Elektrische Beanspruchungen EMV ÖVE/ÖNORM EN 50498:2011; EN 55025; EN 50498

ISO 11451 series

ISO 11451-1Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
As written on the certificate · Line 30 (DAKKS D-PL-12012-01-01)

ISO 7637-1:2015 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMV ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO TS 7637-4:2020; ISO 11451-1:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology EMV ISO 11451-2:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMV ISO 11451-3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3

ISO 11451-2Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
As written on the certificate · Line 30 (DAKKS D-PL-12012-01-01)

ISO 7637-1:2015 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMV ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO TS 7637-4:2020; ISO 11451-1:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology EMV ISO 11451-2:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMV ISO 11451-3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3

ISO 11451-3Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
As written on the certificate · Line 30 (DAKKS D-PL-12012-01-01)

ISO 7637-1:2015 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMV ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO TS 7637-4:2020; ISO 11451-1:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology EMV ISO 11451-2:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMV ISO 11451-3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3

ISO 11451-4Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
As written on the certificate · Line 31 (DAKKS D-PL-12012-01-01)

DIN EN 15194:2018; ISO 11451-4:2013 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4; ISO 11451-4:2022; ISO 14982:2010; ISO 14982:1998

EN 50121 series

EN 50121-1Name not checked yet
As written on the certificate · Line 9 (DAKKS D-PL-12012-01-01)

en 3; EN 12015; EN 12016; EN 50121-1; EN 50121-2

EN 50121-2Name not checked yet
As written on the certificate · Line 9 (DAKKS D-PL-12012-01-01)

en 3; EN 12015; EN 12016; EN 50121-1; EN 50121-2

EN 50121-5Name not checked yet
As written on the certificate · Line 10 (DAKKS D-PL-12012-01-01)

DIN EN 50370-1:2006; DIN EN 50370-2:2003; EN 50121-5; EN 61000-4-12; EN 50130-4

IEC 60947 series

IEC 60947-1Name not checked yet
As written on the certificate · Line 14 (DAKKS D-PL-12012-01-01)

EN 60947-1; IEC 60730-2-; IEC 60730-2-8; IEC 60730-2-9; IEC 60730-2-14

IEC 60947-4-3Name not checked yet
As written on the certificate · Line 15 (DAKKS D-PL-12012-01-01)

EN 60947-4-3; EN 60974-10; IEC 60947-4-; IEC 60947-5-2; IEC 60974-10

IEC 60947-5-2Name not checked yet
As written on the certificate · Line 15 (DAKKS D-PL-12012-01-01)

EN 60947-4-3; EN 60974-10; IEC 60947-4-; IEC 60947-5-2; IEC 60974-10

ISO 7637 series

ISO 7637-1Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Vocabulary and general considerations
As written on the certificate · Line 30 (DAKKS D-PL-12012-01-01)

ISO 7637-1:2015 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMV ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO TS 7637-4:2020; ISO 11451-1:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology EMV ISO 11451-2:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMV ISO 11451-3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3

ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
As written on the certificate · Line 30 (DAKKS D-PL-12012-01-01)

ISO 7637-1:2015 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMV ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO TS 7637-4:2020; ISO 11451-1:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology EMV ISO 11451-2:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMV ISO 11451-3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3

ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
As written on the certificate · Line 30 (DAKKS D-PL-12012-01-01)

ISO 7637-1:2015 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMV ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO TS 7637-4:2020; ISO 11451-1:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology EMV ISO 11451-2:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMV ISO 11451-3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3

Scope as published by DAKKS

49 lines
DAKKS

ISO/IEC 17025

Active

D-PL-12012-01-03

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-12012-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-12012-01-02

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-12012-01-01

View scope

Location

Emil-Figge-Straße 76, Dortmund, 44227, DE

51.49270, 7.40475

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.