Poland

Laboratorium Energomontaż-Zachód

ul. Kozia 18, 54-102, Wrocław, Poland

PCA AB 1919ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 17
PCA certificate: 1
Site in our directory: 1

PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 17 standard numbers and the 17 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO16

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles

ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test

ISO 5173Destructive tests on welds in metallic materials - Bend tests

ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

ISO 7438Metallic materials - Bend test

ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints

ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination

ISO 10893-8Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections

ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film

ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints

ISO 17638Non-destructive testing of welds - Magnetic particle testing

ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds

ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment

Other standards1

EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

2 lines

PCA

ISO/IEC 17025

Active

AB 1919

The scope document we hold says it is valid until 2028-12-26.

View on PCA

Accredited scope, certificate AB 1919

Line	Method	Matrix	Range
1	-	Construction products and materials Show page text Extracted from the scope document; tables may not line up. View scope for the original. PCA Zakres akredytacji Nr AB 1919 Scope of accreditation No AB 1919 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No AB 1919 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 1 z/of 27.12.2024 r. KIEROWNIK BIURA DS. AKREDYTACJI TADEUSZ MATRAS Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 1919 z dnia 27.12.2024 r. Cykl akredytacji od 27.12.2024 r. do 26.12.2028 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No AB 1919 of 27.12.2024 Accreditation cycle from 27.12.2024 to 26.12.2028 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No 1, 27.12.2024 r. 1/3 Nazwa i adres / Name and address LABORATORIUM ENERGOMONTAŻ-ZACHÓD SP. Z O.O. ul. Kozia 18 54-102 Wrocław Kod identyfikacyjny / Identification code ) Dziedzina i przedmiot badań / Field of testing and item: - J/8 - Badania mechaniczne, badania metalograficzne wyrobów i materiałów konstrukcyjnych / Mechanical tests, metallographic tests of construction products and materials - L/8 - Badania nieniszczące wyrobów i materiałów konstrukcyjnych / Non-destructive tests of construction products and materials Wersja strony/Page version: A ) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB-07 dostępnym na stronie internetowej www .pca.gov.pl / The identification code according to the Annex to document DAB-07, available at PCA website www.pca .gov.pl AB 1919	-
2	PN-EN ISO 17637:2017-02; PN-EN ISO 17636-1:2023-02; PN-EN ISO 5579:2014-02; PN-EN ISO 17638:2017-01; PN-EN ISO 3452-1:2021-12; PN-EN ISO 17640:2019-01; PN-EN 10160:2001; PN-EN ISO 10893-8:2011; PN-EN ISO 17639:2022-07; PN-EN ISO 6892-1:2020-05; PN-EN ISO 4136:2022-12; PN-EN ISO 5173:2023-06; PN-EN ISO 7438:2021-04; PN-EN ISO 148-01:2017-02; PN-EN ISO 9016:2022-09; PN-EN ISO 6507-1:2024-04; PN-EN ISO 9015-01:2011	Złącza spawane; materiały metalowe; Wyroby i materiały metalowe; Wyroby stalowe płaskie; Rury stalowe	to 1000 kN

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ul. Kozia 18, Wrocław, 54-102, PL

51.12631, 16.97820

Open in Maps

← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.