Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
ul. Gdańska 118, 90-520, Łódź, Poland
- Accredited standards
- 224
- PCA certificates
- 8
- Sites in our directory
- 2
What this lab is accredited for
Our reading of the PCA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 224 standard numbers and the 170 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO131
ISO 2Textiles - Designation of the direction of twist in yarns and related products
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 48Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 287Paper and board - Determination of moisture content of a lot - Oven-drying method
ISO 302Pulps - Determination of Kappa number
ISO 534Paper and board - Determination of thickness, density and specific volume
ISO 535Paper and board - Determination of water absorptiveness - Cobb method
ISO 536Paper and board - Determination of grammage
ISO 811Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1421Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
Show all 131
ISO 1763Textile floor coverings - Determination of number of tufts and/or loops per unit length and per unit area
ISO 1765Machine-made textile floor coverings - Determination of thickness
ISO 1817Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 1924-2Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min)
ISO 1973Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
ISO 1974Paper - Determination of tearing resistance - Elmendorf method
ISO 2060Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method
ISO 2061Textiles - Determination of twist in yarns - Direct counting method
ISO 2062Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO 2234Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load
ISO 2248Packaging - Complete, filled transport packages - Vertical impact test by dropping
ISO 2286-2Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
ISO 2286-3Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness
ISO 2411Rubber- or plastics-coated fabrics - Determination of coating adhesion
ISO 2470-1Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
ISO 2471Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method
ISO 2493Paper and board - Determination of resistance to bending
ISO 2589Leather - Physical and mechanical tests - Determination of thickness
ISO 2758Paper - Determination of bursting strength
ISO 2759Board - Determination of bursting strength
ISO 2781Rubber, vulcanized or thermoplastic - Determination of density
ISO 3035Corrugated fibreboard - Determination of flat crush resistance
ISO 3036Board - Determination of puncture resistance using a pendulum device
ISO 3037Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method)
ISO 3039Corrugated fibreboard - Determination of grammage of the component papers after separation
ISO 3071Textiles - Determination of pH of aqueous extract
ISO 3376Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation
ISO 3377-1Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear
ISO 3377-2Leather - Physical and mechanical tests - Part 2: Determination of double edge tear load
ISO 3379Leather - Determination of distension and strength of surface (ball burst method)
ISO 3759Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 3801Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area
ISO 4045Leather - Chemical tests - Determination of pH and difference figure
ISO 4048Leather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content
ISO 4643Moulded plastics footwear - Lined or unlined poly(vinyl chloride) boots for general industrial use - Specification
ISO 4649Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4674-1Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods
ISO 4674-2Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method
ISO 4684Leather - Chemical tests - Determination of volatile matter
ISO 4920Textile fabrics - Determination of resistance to surface wetting (spray test)
ISO 5077Textiles - Determination of dimensional change in washing and drying
ISO 5079Textile fibres - Determination of breaking force and elongation at break of individual fibres
ISO 5084Textiles - Determination of thickness of textiles and textile products
ISO 5088Textiles - Ternary fibre mixtures - Quantitative analysis
ISO 5402-1Leather - Determination of flex resistance - Part 1: Flexometer method
ISO 5403-1Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer)
ISO 5423Moulded plastics footwear - Lined or unlined polyurethane boots for general industrial use - Specification
ISO 5470-2Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader
ISO 5628Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
ISO 5636-3Paper and board - Determination of air permeance (medium range) - Part 3: Bendtsen method
ISO 6330Textiles - Domestic washing and drying procedures for textile testing
ISO 6530Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids
ISO 6588Paper, board and pulps - Determination of pH of aqueous extracts
ISO 6940Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens
ISO 6941Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens
ISO 6942Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
ISO 6989Textile fibres - Determination of length and length distribution of staple fibres (by measurement of single fibres)
ISO 7771Textiles - Determination of dimensional changes of fabrics induced by cold-water immersion
ISO 7854Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing
ISO 8388Knitted fabrics - Types - Vocabulary
ISO 8543Textile floor coverings - Methods for determination of mass
ISO 8784-1Pulp, paper and board - Microbiological examination - Part 1: Enumeration of bacteria and bacterial spores based on disintegration
ISO 8784-3Pulp, paper and board - Microbiological examination - Part 3: Enumeration of yeast and mould based on disintegration
ISO 8791-2Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2: Bendtsen method
ISO 9151Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
ISO 9184-3Paper, board and pulps - Fibre furnish analysis - Part 3: Herzberg staining test
ISO 9237Textiles - Determination of the permeability of fabrics to air
ISO 9239-1Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
ISO 9863-1Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
ISO 9864Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
ISO 9867Textiles - Evaluation of the wrinkle recovery of fabrics - Appearance method
ISO 9895Paper and board - Compressive strength - Short-span test
ISO 10319Geosynthetics - Wide-width tensile test
ISO 10716Paper and board - Determination of alkali reserve
ISO 11092Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
ISO 11475Paper and board - Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
ISO 11640Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
ISO 11641Leather - Tests for colour fastness - Colour fastness to perspiration
ISO 11644Leather - Test for adhesion of finish
ISO 11925-2Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test
ISO 12048Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester
ISO 12127-1Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder
ISO 12236Geosynthetics - Static puncture test (CBR test)
ISO 12625-4Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ISO 12625-6Tissue paper and tissue products - Part 6: Determination of grammage
ISO 12947-2Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
ISO 12952-1Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette
ISO 12952-2Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent
ISO 13287Personal protective equipment - Footwear - Test method for slip resistance
ISO 13433Geosynthetics - Determination of dynamic perforation (cone drop test)
ISO 13934-1Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13935-1Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method
ISO 13935-2Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method
ISO 13936-2Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
ISO 14184-1Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
ISO 14268Leather - Physical and mechanical tests - Determination of water vapour permeability
ISO 14362-1Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO 14362-3Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO 14389Textiles - Determination of the phthalate content - Tetrahydrofuran method
ISO 14419Textiles - Oil repellency - Hydrocarbon resistance test
ISO 15025Protective clothing - Protection against flame - Method of test for limited flame spread
ISO 15700Leather - Tests for colour fastness - Colour fastness to water spotting
ISO 17072-1Leather - Chemical determination of metal content - Part 1: Extractable metals
ISO 17075-1Leather - Chemical determination of chromium(VI) content in leather - Part 1: Colorimetric method
ISO 17226-2Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis
ISO 17227Leather - Physical and mechanical tests - Determination of dry heat resistance of leather
ISO 17229Leather - Physical and mechanical tests - Determination of water vapour absorption
ISO 17234-1Leather - Chemical tests for the determination of certain azo colourants in dyed leathers - Part 1: Determination of certain aromatic amines derived from azo colourants
ISO 17493Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
ISO 17694Footwear - Test methods for uppers and lining - Flex resistance
ISO 17697Footwear - Test methods for uppers, lining and insocks - Seam strength
ISO 17700Footwear - Test methods for upper components and insocks - Colour fastness to rubbing and bleeding
ISO 20344Personal protective equipment - Test methods for footwear
ISO 20471High visibility clothing - Test methods and requirements
ISO 20645Textile fabrics - Determination of antibacterial activity - Agar diffusion plate test
ISO 20743Textiles - Determination of antibacterial activity of textile products
ISO 20932-1Textiles - Determination of the elasticity of fabrics - Part 1: Strip tests
ISO 23529Rubber - General procedures for preparing and conditioning test pieces for physical test methods
EN34
EN 388
EN 407
EN 597-1
EN 597-2
EN 646
EN 1021-1
EN 1021-2
EN 1049-2
EN 1101
EN 1102
EN 1103
EN 1541
Show all 34
EN 1624
EN 1625
EN 1773
EN 1875-3
EN 12127
EN 12242
EN 12568
EN 13758-1
EN 13772
EN 13780
EN 14119
EN 14465
EN 14971
EN 15090
EN 16711-1
EN 16711-2
EN 17132
EN 20105-N01
EN 22248
EN 29073-1
EN 29073-3
EN 29865
ISO 105 series17
ISO 105-A04Textiles - Tests for colour fastness - Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 105-B02Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B04Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B07Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration
ISO 105-C06Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering
ISO 105-D01Textiles - Tests for colour fastness - Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-E01Textiles - Tests for colour fastness - Part E01: Colour fastness to water
ISO 105-E02Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water
ISO 105-E03Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 105-E04Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
ISO 105-E07Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water
Show all 17
ISO 105-J01Textiles - Tests for colour fastness - Part J01: General principles for measurement of surface colour
ISO 105-J03Textiles - Tests for colour fastness - Part J03: Calculation of colour differences
ISO 105-X05Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents
ISO 105-X11Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing
ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
ISO 1833 series6
ISO 1833-4Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)
ISO 1833-6Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
ISO 1833-7Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
ISO 1833-11Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)
ISO 1833-12Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)
ISO 1833-16Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene)
ISO 9073 series5
ISO 9073-1Nonwovens - Test methods - Part 1: Determination of mass per unit area
ISO 9073-2Textiles - Test methods for nonwovens - Part 2: Determination of thickness
ISO 9073-3Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method
ISO 9073-4Nonwovens - Test methods - Part 4: Determination of tear resistance by the trapezoid procedure
ISO 9073-5Nonwovens - Test methods - Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
ISO 13937 series4
ISO 13937-1Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
ISO 13937-2Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
ISO 13937-3Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)
ISO 13937-4Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)
ISO 22568 series4
ISO 22568-1Foot and leg protectors - Requirements and test methods for footwear components - Part 1: Metallic toecaps
ISO 22568-2Foot and leg protectors - Requirements and test methods for footwear components - Part 2: Non-metallic toecaps
ISO 22568-3Foot and leg protectors - Requirements and test methods for footwear components - Part 3: Metallic perforation resistant inserts
ISO 22568-4Foot and leg protectors - Requirements and test methods for footwear components - Part 4: Non-metallic perforation resistant inserts
EN 1149 series3
EN 1149-1
EN 1149-2
EN 1149-3
EN 71 series3
EN 71-1
EN 71-2
EN 71-3
ISO 12945 series3
ISO 12945-1Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 1: Pilling box method
ISO 12945-2Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 2: Modified Martindale method
ISO 12945-4Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 4: Assessment of pilling, fuzzing and matting by visual analysis
Other standards14
DIN 53160
DIN 54345
PN-C-04238
PN-E-05203
PN-O-91121
PN-O-91123
PN-P-01701
PN-P-04613
PN-P-04629
PN-P-04652
PN-P-04653
PN-P-04847-15
PN-P-04871
PN-P-50176-3
PN-EN ISO 5079:2021-03; PN-EN ISO 1973:2022-03; PN-ISO 6989:2000; PN-P-04653:1997; PN-EN ISO 2060:1997; PN-ISO 2:1996; PN-EN ISO 2061:2015-09; PN-P-04652:1997; PN-EN ISO 2062:2010; PN-88/P-04625; PN-ISO 3801:1993; PN-EN 1049-2:2000; PN-EN ISO 13936-2:2005
PN-P-04653:1997; PN-EN ISO 2060:1997; PN-ISO 2:1996; PN-EN ISO 2061:2015-09; PN-P-04652:1997; PN-EN ISO 2062:2010; PN-88/ P-04625; PN-ISO 3801:1993; PN-EN 1049-2:2000; PN-P-01701:1952; PN-EN ISO 13936-2:2005; PN-EN ISO 13934-1:2013-07; PN-EN ISO 13937-1:2002; PN-EN ISO 13937-2:2002; PN-EN ISO 13937-3:2002; PN-EN ISO 13937-4:2002
PN-ISO 37:2007+AC1:2008; PN-ISO 34-1:2007; PN-ISO 2781:1996; PN-C-04238:1980; PN-EN ISO 868:2005; PN-ISO 48:1998; PN-ISO 1817:2001+Ap1:2002; PN-EN ISO 20344:2012 p. 8.6; PN-EN ISO 20344:2022-04 p. 8.8; PN-ISO 23529:2006 p. 7; PN-ISO 4649:2007; PN-EN ISO 20344:2012 p. 8.4.1; PN-EN ISO 20344:2022-04 p. 8.5; PN-EN ISO 20344:2012 p. 8.4.2; PN-EN ISO 20344:2022-04 p. 8.6; PN-EN ISO 20344:2012 p. 8.7; PN-EN ISO 20344:2022-04 p. 8.9; PN-EN ISO 20344:2012 p. 8.1.2; PN-EN ISO 20344:2022-04 p. 8.2
PN-65/P-50127; PN-65/P-50128 p. 3; PN-65/P-50128 p. 4; PN-ISO 10716:2009; ISO 10716:1994; PN-93/P-50166/02; ISO 8791-2:1990; PN-P-50176-3:1994; ISO 5636-3:1992; PN-EN ISO 535:2023-10; EN ISO 535:2023; ISO 535:2023; PN-EN ISO 534:2012; EN ISO 534:2011; ISO 534:2011; BL-BP-01, wyd. I z 14.04.2023r.; PN-EN ISO 287:2018-02; PN-92/P-50116/03; ISO 9184-3:1990; ISO 9184-3:1990; PN-84/P-50109; ISO 6588:1981; PN-EN 1541:2003; EN 1541:2001; BL-BP-02, wyd. I z 14.04.2023r.; ISO 302:2015; PN-EN ISO1924-2:2010; EN ISO 1924-2:2008; ISO 1924-2:2008; PN-ISO 2493:1995; ISO 2493:1992; PN-ISO 9895:2002; ISO 9895:1989
PN-EN ISO 536:2020-08; EN-ISO 536:2020; ISO 536:2019; PN-EN ISO 2759:2014-09; EN ISO 2759:2014; ISO 2759:2014; PN-92/P-50140; ISO 3036:1975; PN-EN ISO 1974:2012; EN ISO 1974:2012; ISO 1974:2012; PN-EN ISO 2758:2014-10; EN ISO 2758:2014; ISO 2758:2014; PN-EN ISO 3035:2011; EN ISO 3035:2011; ISO 3035:2011; PN-EN ISO 3037:2023-06; EN ISO 3037:2022; ISO 3037:2022; PN-ISO 5628:1995; ISO 5628:1990; PN-85/P-50155; ISO 3039:1975; PN-EN 22248:2001; EN 22248:1992; ISO 2248:1985
PN-EN ISO 17227:2005; PN-EN 388+A1:2019-01 p.6.4; PN-P-04613:1997 p. 3.4; PN-EN ISO 9073-1:2023-11; PN-EN 12127:2000; PN-EN ISO 811:2018-07
PN-P-04613:1997; PN-EN ISO 8388:2005; PN-EN 14971:2007; PN-79/P-04738; PN-EN 12127:2000; PN-EN ISO 13935-1:2014-06; PN-EN ISO 13935-2:2014-06; PN-EN ISO 9237:1998; PN-EN ISO 811:2018-07; PN-EN ISO 4920:2013-02; PN-EN 1773:2000; PN-ISO 9867:1999; PN-EN ISO 12947-2:2017-02; PN-EN ISO 5084:1999; PN-EN ISO 12945-1:2021-04; PN-EN ISO 12945-4:2021-04; PN-EN ISO 12945-2:2021-04; PN-EN 14465:2005+A1:2007
PN-EN ISO 5403-1:2012; PN-EN ISO 20344:2012 p. 6.13; PN-EN ISO 20344:2022-04 p. 6.13; PN-EN ISO 3379:2015-11; PN-EN ISO 20344:2012 p. 6.6; PN-EN ISO 20344:2022-04 p. 6.6; PN-EN ISO 14268:2023-08; PN-EN ISO 20344:2012 p. 6.7; PN-EN ISO 20344:2022-04 p. 6.7; PN-EN ISO 17229:2016-06; PN-EN ISO 20344:2012 p. 6.8; PN-EN ISO 20344:2022-04 p. 6.8; PN-EN ISO 17229:2016-06; PN-EN ISO 20344:2012 p. 6.12; PN-EN ISO 20344:2022-04 p. 6.12; PN-EN ISO 1421:2017-02; PN-EN ISO 13934-1:2013-07; PN-EN ISO 4674-1:2017-02; PN-EN ISO 13937-2:2002; PN-EN ISO 9073-4:2021-07; PN-EN ISO 2411:2025-02E; PN-EN ISO 5470-2:2005 Metoda 1; PN-EN ISO 5470-2:2022-03 Metoda 1; PN-EN ISO 20344:2012 p. 7.3; PN-EN ISO 20344:2022-04 p. 7.3; PN-EN ISO 20344:2012 p. 7.2; PN-EN ISO 20344:2022-04 p. 7.2; PN-EN ISO 20344:2012 p. 7.1; PN-EN ISO 20344:2022-04 p. 7.1; PB-37/NA wyd. IV z 15.10.2021 r.
PN-ISO 7771:1994; PN-EN ISO 5077:2011; PN-EN ISO 3759:2011; PN-EN ISO 6330:2022-06; PN-EN ISO 1421:2017-02 p. 8; PN-EN ISO 2286-2:2016-11 p. 3; PN-EN ISO 2286-3:2016-11; PN-EN ISO 4674-1:2017-02; PN-P-04871:1991; PN-E-05203:1992 p. 2.4.3; p. 2.4.4; DIN 54345 cz. 1:1992; PN-EN 1149-1:2008; PN-EN 1149-2:1999+Ap1:2001; PN-EN 1149-3:2007 p. 4.3; PN-E-05203:1992 p. 2.4.3; p. 2.4.4
PN-EN ISO 9073-2:2002; PN-EN 29073-1:1994; PN-EN ISO 9073-1:2023-11; PN-EN 29073-3:1994; PN-EN ISO 9073-3:2023-11; PN-EN ISO 9073-4:2021-07; PN-EN ISO 9073-5:2008; PN-ISO 7771:1994; PN-EN ISO 5077:2011; PN-EN ISO 3759:2011; PN-EN ISO 6330:2022-06; PN-EN ISO 1421:2017-02; PN-EN ISO 2286-2:2016-11; PN-EN ISO 2286-3:2016-11; PN-EN ISO 4674-1:2017-02; PN-EN ISO 4674-2:2022-04; PN-EN 1875-3:2002; PN-EN 1875-3:2023-07; PN-EN ISO 7854:2002; PN-EN ISO 5470-2:2022-03
PN-EN 388 + A1:2019-01; PN-ISO 8543:1998; PN-ISO 1765:1998; PN-ISO 1763:1998; PN-EN 12242:2002; PN-EN 13780:2005; PN-85/P-04889; PN-91/P-04887; PN-EN 71-1+A1:2018-08; PN-E-05203:1992; DIN 54345 cz. 1:1992; PN-EN 1149-1:2008; PN-EN 1149-2:1999+Ap1:2001; PN-EN 1149-3:2007
PN-EN ISO 12048:2002; EN ISO 12048:2000; ISO 12048:1994; PN-EN ISO 2234:2007; EN ISO 2234:2002; ISO 2234:2000; ISO 2470-1:2016; ISO 2471:2008; PN-ISO 11475:2002; PN-89/P-04781/11; PN-89/P-04781/12; PN-EN 646:2019-03; EN 646:2018; PN-EN ISO 12625-6:2017-03; EN ISO 12625-6:2016; ISO 12625-6:2016; PN-EN ISO 12625-4:2023-02; EN ISO 12625-4:2022; ISO 12625-4:2022
PN-EN ISO 2589:2016-05; PN-EN ISO 3376:2020-10; PN-EN ISO 3377-1:2012; PN-EN ISO 3377-2:2016-06; PN-EN ISO 17075-1:2017-05; PN-EN ISO 4048:2018-10; PN-EN ISO 4045:2018-09; PN-EN ISO 17226-2:2019-05; PN-EN ISO 4684:2006; PN-EN ISO 11644:2023-05; PN-EN ISO 15700:2001; PN-EN ISO 11640:2018-12; PN-EN ISO 17700:2019-12; PN-EN ISO 11641:2013-05; PN-EN ISO 17694:2016-08; PN-EN ISO 5402-1:2022-10
PN-EN ISO 3071:2020-08; PN-EN ISO 105-X12:2016-08; PN-EN ISO 105-E01:2013; PN-E ISO 105-C06:2010; PN-EN ISO 105-E04:2013; PN-EN ISO 105-X11:2000; PN-EN 20105-N01:2000; PN-EN ISO 105-E07:2010; PN-EN ISO 105-D01:2010; PN-EN ISO 105-B02:2014-11; PN-EN ISO 20471:2013; PB-10; PN-EN ISO 105-J01:2002; PN-EN ISO 105-J03:2009; PN-EN ISO 105-A04:2001; PN-EN ISO 105-A05:2000; PN-EN 13758-1+A1:2007
PN-EN ISO 14184-1:2011; PN-EN ISO 3071:2020-08; PN-EN ISO 14362-1:2017-04
PN-72/P-04604; PN-92/P-04846; Rozporządzenie Parlamentu Europejskiego i Rady (UE) Nr 1007/2011 z dnia 27.09.2011 r. ze zm., Załącznik VIII, Rozdział 2 i 3; PN-93/P-04847.02; PN-93/P-04847.03; PN-EN ISO 1833-4:2024-03; Rozporządzenie Parlamentu Europej-skiego i Rady (UE) Nr 1007/2011 ze zm. z dnia 27 września 2011 r., Załącznik VIII, Metoda nr 2; PN-93/P-04847.05; PN-EN ISO 1833-6:2019-05; Rozporządzenie Parlamentu Europej-skiego i Rady (UE) Nr 1007/2011 ze zm. z dnia 27 września 2011 r., Załącznik VIII, Metoda nr 3; PN-93/P-04847.06; PN-EN ISO 1833-7:2017-12; Rozporządzenie Parlamentu Europej-skiego i Rady (UE) Nr 1007/2011 ze zm. z dnia 27 września 2011 r., Załącznik VIII, Metoda nr 4; PN-93/P-04847.10; PN-EN ISO 1833-11:2017-12; Rozporządzenie Parlamentu Europej-skiego i Rady (UE) Nr 1007/2011 ze zm. z dnia 27 września 2011 r., Załącznik VIII, Metoda nr 7; PN-93/P-04847.11; PN-EN ISO 1833-12:2021-03; Rozporządzenie Parlamentu Europej-skiego i Rady (UE) Nr 1007/2011 ze zm. z dnia 27 września 2011 r., Załącznik VIII, Metoda nr 8; PN-93/P-04850; PN-P-04847-15:1994; PN-EN ISO 1833-16:2019-08; Rozporządzenie Parlamentu Europej-skiego i Rady (UE) Nr 1007/2011 ze zm. z dnia 27 września 2011 r., Załącznik VIII, Metoda nr 13; PN-ISO 5088:2002; PN-EN ISO 3071:2020-08
PN-EN ISO 9239-1:2010; PN-EN ISO 11925-2:2020-09; PN-EN ISO 6940:2005; PN-EN 1101:1999+A1:2006; PN-EN 1625 :2002; PN-EN ISO 6941:2005; PN-EN 1102:2016-09; PN-EN 13772:2012; PN-EN 1624:2002; PN-EN 1021-1:2014-12; PN-EN 1021-2:2014-12; PN-EN 597-1:2016-02; PN-EN 597-2:2016-03; PN-EN ISO 12952-1:2011; PN-EN ISO 12952-2:2011; PN ISO 3795:1996; PN-EN ISO 15025:2017-02; ISO 17493:2016; PN-EN ISO 6942:2005; PN-EN ISO 6942:2023-03; PN-EN ISO 9151:2017-02; PN-EN ISO 6530:2008; PN-EN ISO 12127-1:2016-02; PN-EN 1103:2006; PN-EN 71-2:2021-05
PN-O-91121:1973; PN-EN ISO 20344:2012; PN-EN ISO 20344:2022-04; PN-O-91123:1990; PN-EN ISO 17697:2016-08; PB 9/NO:2021; PN-ISO 4643:1994; PN-ISO 5423:1994; PB 11/NO
PN-EN ISO 12947-2:2017-02; PN-EN 14465:2005+A1:2007; PN-EN ISO 11092:2014-11; PN-EN ISO 12945-2:2021-04; PN-EN ISO 12945-4:2021-04; PN-EN ISO 12945-1:2021-04; PN-EN ISO 5084:1999; PN-EN ISO 9073-2:2002; PN-EN 29073-1:1994; PN-EN ISO 9073-1:2023-11; PN-EN 29073-3:1994; PN-EN ISO 9073-3:2023-11; PN-EN ISO 9073-5:2008; PN-EN ISO 10319:2015-08; PN-EN ISO 12236:2007; PN-EN ISO 13433:2007; PN-EN ISO 9863-1:2016-09+A1:2020-05; PN-EN ISO 9864:2007
PN-EN 407:2020-10; PN-EN ISO 15025:2017-02; PN-EN ISO 12127-1:2016-02; PN-EN ISO 9151: 2017-02; PN-EN ISO 6942:2005
PN-EN ISO 20743:2021-12; PN-EN 14119:2005; NO-06-A107:2021 p.4.14, p.5.17; ISO 8784 -1:2014; ISO 8784 – 3:2022
PN-EN ISO 13934-1:2013-07; PN-EN ISO 13937-1:2002; PN-EN ISO 13937-2:2002; PN-EN ISO 13937-3:2002; PN-EN ISO 13937-4:2002; PN-P-04613:1997; PN-EN 14971:2007; Procedura Badawcza nr 59:2024; PN-79/P-04738; PN-EN 12127:2000; PN-EN ISO 9237:1998; PN-P-04629:1991; PN-EN 29865:1997; PN-EN 1773:2000; PN-ISO 9867:1999; PN-EN ISO 12947-2:2017-02; PN-EN ISO 20932-1:2020-08+A1:2022-04
PN-EN ISO 20344:2012; PN-EN ISO 20344:2022-04; PN-EN ISO 13287:2013-04
PN-EN ISO 13287:2020-03
PN-EN ISO 14184-1:2011; PN-EN ISO 17234-1:2021-03
PN-EN ISO 14184-1:2011; PN-EN 13758-1:2007; PN-87/P-04707; PN-83/P-04607; PN-86/P-04643; PN-89/P-04781/14; PN-89/P-04781/15; PN-89/P-04781/11; PB/19/1999
PN-EN ISO 14362-1:2017-04; PN-EN ISO 14362-3:2017-04; PB-5.4 wydanie 3 z dnia 30.03.2018 r.
PN-EN ISO 14362-1:2017-04; PB/20/1999 wydanie 9 z dnia 01.04.2022 r.
PN-EN ISO 14389:2023-03; PN-EN ISO 14362-3:2017-04
PN-EN ISO 14389:2023-03
PN-EN ISO 105-E01:2013-06; PN-EN-ISO 105-E04:2013-06; PN-EN ISO 105-C06:2010; PN-EN ISO 105-X12:2016-08; DIN 53160:2023-07; PN-EN ISO 105-X11:2000; PN-EN ISO 105-D01:2010; PN EN ISO 14419:2010; PN-EN ISO 105-E 01:2013
PN-EN ISO 17072-1:2019-07; PB-5.1; PB-3.1
PN-EN ISO 20344:2012 p. 5.3; PN-EN ISO 20344:2022-04 p. 5.3; PN-EN 12568:2011 p. 5.2.1; PN-EN ISO 22568-1:2019-05; PN-EN ISO 22568-2:2019-05; PN-EN ISO 22568-1:2019-05; PN-EN ISO 22568-2:2019-05; PN-EN 12568:2011 p. 5.2.3; PN-EN ISO 22568-1:2019-05; PN-EN ISO 22568-2:2019-05; PN-EN 12568:2011 p. 5.2.2, 5.4; PN-EN ISO 22568-1:2019-05; PN-EN 12568:2011 p. 5.3; PN-EN ISO 22568-3:2019-05; PN-EN ISO 22568-4:2019-05; PN-EN 12568:2011 p. 7.2.1, 7.4; PN-EN ISO 22568-4:2022-06; PN-EN ISO 22568-3:2019-05; PN-EN ISO 22568-4:2019-05; PN-EN 12568:2011 p. 7.2.2; PN-EN ISO 22568-4:2022-06; PN-EN ISO 22568-3:2019-05; PN-EN 12568:2011 p. 7.3; PN-EN ISO 22568-4:2019-05 p. 5.4; PN-EN ISO 22568-4:2022-06; PN-EN 15090:2012 p. 7.5.1; PN-EN 15090:2012 p. 7.5.2; PB17/NO:2023 wyd. III z 12.09.2023 r.
PN-EN ISO 20645:2006
PN-EN 16711-1:2016-01; PN-EN 17132:2019-10
PN-EN 16711-2:2016-01; PB/11/2005; PN-EN 16711-1:2016-01
US §16 C.F.R Part 1303 Ban of Lead-Containing Paint and Certain Consumer Products Bearing Lead-Containing Paint: CPSC-CH-E1003-09; CPSC-CH-E1003-09.1; CPSC-CH-E1001-08; CPSC-CH-E1001-08.1; CPSC-CH-E1001-08.2; CPSC-CH-E1001-08.3; CPSC-CH-E1002-08; CPSC-CH-E1002-08.1; CPSC-CH-E1002-08.2; CPSC-CH-E1002-08.3; PN-EN 16711-2:2016-01
PN-EN ISO 105-X12:2005; PN-EN ISO 105-X12:2016-08; PN-EN ISO 105-B02:2014-11; PN-EN ISO 105-B07:2009; PN-EN ISO 105-B04:2024-08; PN-EN ISO 105-C06:2010; PN-EN ISO 105-E01:2013; PN-EN ISO 105-E02:2013; PN-EN ISO 105-E03:2010; PN-EN ISO 105-E04:2013; PN-EN 20105-N01:2000; PN-EN ISO 105-X05:1999; PN-EN ISO 105-X11:2000; PB/4/97; PB/5/2001; PN-EN ISO 105-J01:2002; PN-EN ISO 105-J03:2009
PN-EN 71-3+A1:2021-09; CPSC-CH-C1001-09.4
Read from the PCA scope documents we downloaded on 2026-02-11, 2026-02-12 and 2026-03-13. Register refreshed 2026-11-06.
Scope as published by PCA
51 lines
ISO/IEC 17025
ActiveAB 029
The scope document we hold says it is valid until 2030-02-11.
ISO/IEC 17025
ActiveAB 033
The scope document we hold says it is valid until 2029-12-17.
ISO/IEC 17025
ActiveAB 062
The scope document we hold says it was valid until 2026-07-25. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-02-12. Check the PCA register for the current scope.
ISO/IEC 17025
ActiveAB 065
The scope document we hold says it is valid until 2028-11-25.
ISO/IEC 17025
ActiveAB 077
The scope document we hold says it is valid until 2026-12-17.
ISO/IEC 17025
ActiveAB 164
The scope document we hold says it is valid until 2029-07-15.
ISO/IEC 17025
ActiveAB 388
The scope document we hold says it is valid until 2028-11-25.
ISO/IEC 17025
ActiveAB 1401
The scope document we hold says it is valid until 2029-01-31.
Location
Other Locations
1 other site in this organization
Labs with overlapping accredited scope in Poland
- "EKO-SERWIS" s.c. Dorota Markowska, Maciej MarkowskiŁódź · under 1 kmPCAShares 1 accredited materialSoil
- ORLEN Laboratorium S.A.Płock · ~86 kmPCAShares 1 accredited materialSoil
- TRI Europe Sp. z o.o.Nadarzyn · ~98 kmPCAShares 1 accredited materialTextile
- GBA POLSKA Sp. z o.o.Warszawa · ~120 kmPCAShares 1 accredited materialSoil
- Laboratorium Badawcze INTERLABO A.Tomaszewski, M.Tomaszewski Spółka JawnaWarszawa · ~120 kmPCAShares 1 accredited materialSoil
Accreditation data refreshed from the PCA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.