Registers refreshed 2026-11-08.See refresh dates
Italy

LAB.MET. srl Laboratorio per i metalli e la metallurgia a socio unico

Via Venezia, 22, 33085, Maniago, Italy

ACCREDIA 00882ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
52
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 52 standard numbers and the 39 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM30
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A604
ASTM A751
ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A1084
ASTM E3Standard Guide for Preparation of Metallographic Specimens
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E18-25 - escluso/except Par

Exclusion. Written next to it on line 4 of ACCREDIA certificate 00882.

ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E23Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E45Standard Test Methods for Determining the Inclusion Content of Steel
Show all 30
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E190
ASTM E290Standard Test Methods for Bend Testing of Material for Ductility
ASTM E340Standard Practice for Macroetching Metals and Alloys
ASTM E381
ASTM E384Standard Test Method for Microindentation Hardness of Materials
ASTM E407Standard Practice for Microetching Metals and Alloys
ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E975
ASTM E1019Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Combustion and Inert Gas Fusion Techniques
ASTM E1077
ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1447
ASTM E1999
ASTM E3047
ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ISO19
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 3887Steels - Determination of the depth of decarburization
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
Show all 19
ISO 7438Metallic materials - Bend test
ISO 9015-1Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 15614-1Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 17781Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels
ISO 18203Steel - Determination of the thickness of surface-hardened layers
EN3
EN 10002-1
EN 10002-5
EN 10045-1

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

4 lines
ACCREDIA

ISO/IEC 17025

Active

00882

View scope

Accredited scope, certificate 00882

LineMethodMatrixRange
1UNI CEI EN ISO/IEC 17025:2018; ASTM E1077-14(2021); ASTM A751-25 + ASTM E415-21; ASTM E415-21; UNI 8449:1983; ASTM A1084-15a(2022) Met A; ASTM A751-25 + ASTM E1086-22; ASTM E1086-22; ISO 17781:2017; UNI EN ISO 17781:2017; ASTM A923-25 Met A; ASTM A923-25 Met B; ASTM A923-25 Met C; ASTM G48-25 Met A; ASTM E975-22; ISO 643:2024; UNI EN ISO 643:2024; ISO 3887:2023; UNI EN ISO 3887:2024; ISO 18203:2016Acciai basso legati/Low alloy steels; Acciai non legati/Non-alloy steels; Acciai/Steels; Acciai da cementazione/Hardening steels; Acciai Duplex poveri/Lean duplex stainless steel; Acciai inossidabili austenitico/Austenitic stainless steels; Acciai inossidabili ferritici/austenitici (duplex)/Ferritic/austenitic (duplex) stainless steels; Leghe di Nichel/Nickel alloys-
2UNI 3244:1980; ASTM E45-25; ASTM A604/A604M-07(2022); ASTM E381-22; RCC-M MC1000 2007 + NF EN 10045-1:1990; RCC-M MC1000 2007 + NF EN 10002-1:2001; RCC-M MC1000 2007 + NF EN 10002-5:1992; ASTM E1999-23; UNI EN ISO 945-1:2019; ISO 15614-1:2017/Amd1:2019 par 7.4.5 + ISO 9015-1:2001; ISO 9015-1:2001; UNI EN ISO 15614-1:2019 par 7.4.5 + ISO 9015-1:2001; UNI EN ISO 9015-1:2011; AWS D1.1/D1.1M:2025 par 6.10.4; ASME BPVC IX QW 183:2025; ASME BPVC IX QW 184:2025; ISO 15614-1:2017/Amd1:2019 par 7.4.3 + ISO 17639:2022; ISO 17639:2022; UNI EN ISO 15614-1:2019 par 7.4.3 + ISO 17639:2022; UNI EN ISO 17639:2022; ASTM E190-21; ISO 5173:2023; UNI EN ISO 5173:2023; AWS D1.1/D1.1M:2025 par 6.10.3.1; AWS D1.1/D1.1M:2025 par 6.10.3.2; ASME BPVC IX QW 160:2025; AWS D1.1/D1.1M:2025 par 6d; ISO 9016:2022 + ISO 148-1:2016; UNI EN ISO 15614-1:2019 par 7.4.4 + ISO 9016:2022 + ISO 148-1:2016; UNI EN ISO 9016:2022 + UNI EN ISO 148-1:2016; ASME BPVC IX QW 170:2025; ISO 5178:2019 + ISO 6892-1:2019; UNI EN ISO 5178:2019 + UNI EN ISO 6892-1:2020Barre d'acciaio/Steel bars, Billette /Billets; Barre d'acciaio/Steel bars, Billette /Billets, Blumi/Blooms, Fucinati/Forgings; Componenti meccaniche per impianti nucleari/Mechanical components for nuclear applications; Ghise/Cast irons; Giunti saldati di materiali metallici/Welds of metallics materials-196 to 200 °C
3AWS D1.1/D1.1M:2025; ASME BPVC IX QW 150:2025; ISO 4136:2022; ISO 6892-1:2019; UNI EN ISO 15614-1:2019; UNI EN ISO 6892-1:2020; UNI EN ISO 4136:2022; ASTM E1019-24; UNI 11153-1:2006; UNI 11153-2:2006; UNI 11153-3:2006; ASTM E3047-22; ASTM E1447-22; ASTM E3-11(2025); ASTM E407-23; UNI 4227:1973; UNI 3138:1984; UNI 3137:1965; ASTM E112-25; ISO 6506-1:2014; UNI EN ISO 6506-1:2015; ASTM E10-23; ASTM A370-24a; ISO 6508-1:2023; UNI EN ISO 6508-1:2024MetalSee scope document
4ASTM E18-25; ASTM E384-22; ASTM E92-23; ASTM E3-11(2025); ASTM E340-23; ASTM E562-19e1; ASTM E290-22; ISO 7438:2020; UNI EN ISO 7438:2020; ISO 148-1:2016; UNI EN ISO 148-1:2016; ASTM E23-25; ISO 6892-1:2019; UNI EN ISO 6892-1:2020; ASTM E8/E8M-25; ASTM E21-20; ISO 6892-2:2018; UNI EN ISO 6892-2:2018; ISO 6507-1:2023; UNI EN ISO 6507-1:2023MetalSee scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Venezia, 22, Maniago, 33085, IT

46.15125, 12.71564

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.