REHAU Industries SE & Co. KG
Helmut-Wagner-Straße 1, 95111, Rehau, Germany
- Accredited standards
- 89
- DAKKS certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 89 standard numbers and the 55 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO46
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 60Plastics - Determination of apparent density of material that can be poured from a specified funnel
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
Show all 46
ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1402Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 2039-1Plastics - Determination of hardness - Part 1: Ball indentation method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2505Thermoplastics pipes - Longitudinal reversion - Test method and parameters
ISO 2578Plastics - Determination of time-temperature limits after prolonged exposure to heat
ISO 2808Paints and varnishes - Determination of film thickness
ISO 3127Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3501Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force
ISO 3503Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
ISO 4892-1Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance and requirements
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 6133Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 7619-1Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 8256Plastics - Determination of tensile-impact strength
ISO 9080Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9969Thermoplastics pipes - Determination of ring stiffness
ISO 10147Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content
ISO 11173Thermoplastics pipes - Determination of resistance to external blows - Staircase method
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 13056Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
ISO 13479Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
ISO 15512Plastics - Determination of water content
ISO 18553Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
ISO 19892Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling
ISO 19893Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 29862Self adhesive tapes - Determination of peel adhesion properties
EN18
EN 438-2
EN 712
EN 728
EN 743
EN 744
EN 921
EN 1277
EN 1411
EN 1464
EN 1465
EN 1622Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN)
EN 1939
Show all 18
EN 12293
EN 12294
EN 12295
EN 12720
EN 15185
EN 15186
DIN16
DIN 8078
DIN 16887
DIN 16892
DIN 50018
DIN 51004
DIN 53357
DIN 53435
DIN 53504
DIN 53505
DIN 53759
DIN 53765
DIN 68861-1
DIN 68861-2
DIN 68861-4
DIN 75200
DIN 75201
ASTM3
ASTM D624
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ISO 11357 series3
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 527 series3
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
PSA Peugeot -Citroën D45 1727; VW PV 3015; DIN EN ISO 4892 -1; DIN EN ISO 4892 -2; DIN EN ISO 20567 -1; DIN EN ISO 3501; DIN EN ISO 8256; DIN EN ISO 1183 -1; ISO 37; DIN ISO 34 -1; DIN EN ISO 75 -2
DIN EN 438 -2; DIN ISO 48 -4; DBL 5416; DBL 5425; ISO 18553; DIN EN ISO 6259 -1; DIN EN 744; DIN EN ISO 3127; DIN EN ISO 11173; ISO 6259 -3; DIN EN ISO 9080
DIN EN ISO 3451 -1; DIN ISO 6133; DIN 53504; DIN 53435; DIN 53505; DIN ISO 7619 -1; ASTM D 624; ASTM D 638; ASTM D 790; DIN EN ISO 60; DIN EN 15185; DIN EN 15186; DIN 68861 -2; DIN 68861 -4
DIN EN ISO 178; DIN EN ISO 179 -1; DIN EN ISO 180; DIN EN ISO 306; DIN EN ISO 527 -2; DIN EN ISO 527 -3; DIN EN ISO 527 -4; DIN ISO 815 -1; DIN EN ISO 868; DIN EN 1464; DIN EN 1465; DIN EN 1939; DIN EN ISO 29862; DIN EN ISO 2039 -1; DIN EN ISO 2409
DIN EN ISO 13056; DIN EN 12295; DIN EN ISO 19892; DIN EN ISO 1167 -1; DIN EN 712; DIN EN ISO 1402; DIN EN ISO 6270 -2; DIN 50018; DIN EN ISO 9227; DIN 68861 -1; DIN EN 12720; DIN EN ISO 15512
DIN EN ISO 2808; DIN EN ISO 11885; DIN EN 728; DIN EN ISO 1172; DIN EN ISO 2578
DIN EN ISO 9969; DIN EN ISO 13479; DIN EN ISO 2505; DIN EN ISO 3503; DIN EN 743; DIN EN 921; DIN EN 1277; DIN EN 1411; DIN EN 1622; DIN 8078; DIN 16892; DIN 16887
DBL 5555; ISO 10147
DIN 53357; DIN 53759; DVGW G 5628; DVGW VP 626; DVGW GW 335 -A3; DVGW W 534; DVGW W 542; DVGW W 544; DIN EN 12293; DIN EN ISO 19893; DIN EN 12294
DIN EN ISO 11357 -2; DIN EN ISO 11357 -3; DIN EN ISO 11357 -6; DIN 51004; DIN 53765; DIN 75200; DIN 75201; SAE J 1756; FMVSS 302; Directive 95/28/EC; UL 94
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
13 lines
ISO/IEC 17025
ActiveD-PL-22158-01-00
ISO/IEC 17025
ActiveD-PL-22158-01-01
Location
Labs with overlapping accredited scope in Germany
- Ostthüringische Materialprüfgesellschaft für Textil und Kunststoffe mbH Rudolstadt (OMPG)Rudolstadt · ~70 kmDAKKSShares 5 accredited methods and materialsDIN 75200EN ISO 9001ISO 178
- Sächsisches Textilforschungsinstitut e. V. PrüfstelleChemnitz · ~88 kmDAKKSShares 5 accredited methods and materialsDIN 75200EN ISO 9001ISO 178
- SKZ - TestingWürzburg · ~153 kmDAKKSShares 5 accredited methods and materialsDIN 75200EN ISO 9001ISO 178
- iLF MagdeburgMagdeburg · ~210 kmDAKKSShares 5 accredited methods and materialsDIN 75200EN ISO 9001ISO 178
- GWA Gesellschaft für Wasser- und Abwasserservice mbH Institut für Wasser- und UmweltanalytikLuisenthal · ~108 kmDAKKSShares 4 accredited methods and materialsEN 1622EN ISO 9001Plastics
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.