Registers refreshed 2026-11-08.See refresh dates
Mexico

Equipo Automotriz Americana S.A. de

Lib. Carlos Salinas de Gortari #198 Norte, Cd. Frontera, Coahuila, 25618, Mexico, Coahuila, Mexico

A2LA 2071.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
5
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 5 standard numbers and the 2 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM D523Standard Test Method for Specular Gloss
ASTM D2244
ISO 12097
ISO 12097-3Road vehicles - Airbag components - Part 3: Testing of inflator assemblies
VDA 230

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

5 lines
A2LA

ISO/IEC 17025

Active

2071.01

The scope document we hold says it is valid until 2027-06-30.

View scope

Accredited scope, certificate 2071.01

LineMethodMatrixRange
1Chrysler LP-463PB-22-01 (Method II); FLTM BQ 104-02, 104-06, 104-07 (Procedures 1-6); Ford WSS M2P188-A (Section 3.4.7, 3.4.8); GMW14124 (Cycle F, H, M, P, Q, R, S, W, X); Honda 7780Z-T5AA-0000, Sec. 2-2, 2-3, Items 1, 2, 4; 7785Z-T5AA-0000, Sec. 2-2, 2-3, Items 1,2, 4); Nissan 98510 NDS00, Attachment A, except (5); PF11844 (2009), 3.1, 3.2, and 3.3; ITM-22-131 Internal Method; ISO 12097 Part 2, Section 5.7; VDA 230-219airbag components, assemblies, related trim and automotive horns-40 to 140 ºC
2SAE USCAR 24; ITM-22-26; ITM-23-04; ITM-22-130; ITM-23-09; ITM-22-115; ITM-23-03; ITM-23-06; GM9515P (2013); GMW3221; Honda 7710Z; SCC 9000-0096Z-SEC-A000; Honda 7780; Honda 7785; FTLM BI 106-01 (Method B); ASTM D2244; JIS Z 8722; AK-LV 03; DCX PF-6897; PF-11844; Honda 7784Z; ISO 12097-3; MES PA 57K80; SAE USCAR 24 (Sections 5.2.4.8.6); Toyota TSF6761G; ITM-22-86; FMVSS No. 302; HES D6003; ASTM D523; JIS Z 8741; GMW3112; Honda 7780Z; Honda 7785Z; Chrysler PF-6897; PF-11844; Chrysler PF-11844; FORD SDS SAB; GMW3118; PF-6897; SAE USCAR 24 (Section 5.2.4.8.5)-See scope document
3Nissan NES M0141; BN 108-04; BN 108-10; Honda 7710Z-SCC-9000; 0096Z-SEC-A000; GM9515P; GMW3221; Honda 7785-S5A-N900; 7780-T5AA-0000; Honda 0096Z-SEC-A000; Honda 7785; Honda 7780; Nissan NES M0133; JIS L 0849; FLTM BN 107-01; GM9033P; Internal ITM-22-35; ITM-22-36; ITM 22-100; ITM 22-101; SAE USCAR 24; Honda 7784Z-SDAA-N800; AK-LV 03; ISO 12097-3; Mazda MES-PA 57K80; Nissan 98560ND500; Honda 7710Z-SCC-90; 0096Z-SCC-A000; Nissan NES M0141; FLTM BI 104-01-See scope document
4

Extracted from the scope document; tables may not line up. View scope for the original.

(A2LA Cert. No. 2071.01) 05/20/2025 Page 4 of 4 1This laboratory does not offer commercial dimensional testing or calibration services. 2This test is not equivalent to that of a calibration. 3Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine measurements of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = The actual measurement uncertainty of a specific measurement performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific measurement.
5

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited EQUIPO AUTOMOTRIZ AMERICANA S.A. DE C.V. Coahuila C.P., Mexico for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 20th day of May 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 2071.01 Valid to June 30, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Lib. Carlos Salinas de Gortari #198 Norte, Cd. Frontera, Coahuila, 25618, Mexico, Coahuila, MX

27.33333, -102.00000

Open in Maps

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.