Fairbanks Scales

Part 1 of 3

(A2LA Cert. No. 1843.02) 10/25/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 FAIRBANKS SCALES INC. 23471 Lakepointe Drive Clinton Township, MI 48036-4801 Bob Raymond Phone: 513 860 8062 CALIBRATION Valid To: December 31, 2027 Certificate Number: 1843.02 In recognition of the successful co mpletion of the A2LA evaluation process (including an assessment of the organization’s compliance with R205 – A2LA’s Calibration Program Requirements), accreditation is granted to this laboratory to perform the following calibrations 1, 4: I. Mechanical Parameter/Equipment Range CMC 2 (±) Comments Balances 3 (0 to 100) g (100 to 500) g (500 to 4000) g (4000 to 25 000) g 0.30 mg 2.2 mg 0.11 g 3.0 g Class 1, 6, and F weights Scales 3 (0 to 100) lb (101 to 500) lb (501 to 1000) lb (1001 to 5000) lb (5001 to 10 000) lb (10 001 to 200 000) lb 0.011 lb 0.035 lb 0.12 lb 0.39 lb 0.69 lb 50 lb Class 6 and F weights Class F weights and substitution ____________________________________________ 1 This laboratory offers commercial and field calibration service.

Part 2 of 3

(A2LA Cert. No. 1843.02) 10/25/2025 Page 2 of 2 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer’s device and to influences from the circumstances of the specific calibration. 3 Field calibration service is available for this calibration. Please note the actual measurement uncertainties achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g., resolution) must also be considered and this, on its own, could result in the actual measurement uncertainty achievable on a customer’s site being larger than the CMC. 4 This scope meets A2LA’s P112 Flexible Scope Policy.

Part 3 of 3

For the calibrations to which this accreditation applies, please refer to the laboratory’s Calibration Scope of Accreditation. Accredited Laboratory A2LA has accredited FAIRBANKS SCALES INC. Clinton Township, MI for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This laboratory also meets R205 – Specific Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 25th day of October 2025. __ _____________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 1843.02 Valid to December 31, 2027