Registers refreshed 2026-11-08.See refresh dates
Philippines

Continental Autonomous Mobility Philippines

#16 Ring Road Street, LISP 2 - SEZ, Brgy. La Mesa, Calamba City, Laguna 4027, Philippines, Calamba City, Philippines

A2LA 3687.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
14
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 14 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC 60068 series11
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-11Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-27Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-30Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-31Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

Certificate says EN 60068-2-64. Probably the same standard; not checked against the EN document.

IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
Other standards3
ASTM E1508
ISO 16750-3Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
ISO 16750-4Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads

Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines
A2LA

ISO/IEC 17025

Active

3687.01

The scope document we hold says it is valid until 2027-03-31.

View scope

Accredited scope, certificate 3687.01

LineMethodMatrixRange
1ISO/IEC 17025:2017; IEC 60068-2-1; IEC 60068-2-2; IEC 60068-2-14 Nb; IEC 60068-2-30; IEC 60068-2-78; IEC 60068-2-38; ISO 16750-4 (Sections 5.1.1, 5.1.2, 5.2, 5.3.1, 5.7, 5.6.2.2, 5.6.2.3, 5.6.2.4); IEC 60068-2-14 Na; ISO 16750-4 (Section 5.3.2); IEC 60068-2-11; ISO 16750-4 (Section 5.5.2); IEC 60068-2-27; ISO 16750-3; IEC 60068-2-31 (Section 5.2 Free Fall – Procedure 1); IEC 60068-2-64; IEC 60068-2-6; ISO 16750-3automotive, electrical, electronic and mechanical components and assembliesSee scope document
2IPC/JEDEC J-STD-035; Continental 8-SW-20-0015; ASTM E1508; Continental 8-QS-13-0012--
3ISO/IEC 17025:2017--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.