Registers refreshed 2026-11-08.See refresh dates
Germany

SCHOTT AG Akkreditierte Prüflaboratorien SCHOTT

Hattenbergstraße 10, 55122, Mainz, Germany

DAKKS D-PL-14645-01-00DAKKS D-PL-14645-01-01DAKKS D-PL-14645-01-02and 2 moreISO/IEC 17025Register refreshed 2026-11-06
One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
83
DAKKS certificates
5
Sites in our directory
2
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 83 standard numbers and the 50 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO41
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 695Glass - Resistance to attack by a boiling aqueous solution of mixed alkali - Method of test and classification
ISO 719Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification
ISO 720Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification
ISO 1776Glass - Resistance to attack by hydrochloric acid at 100 degrees C - Flame emission or flame atomic absorption spectrometric method
ISO 2781Rubber, vulcanized or thermoplastic - Determination of density
ISO 3749Glass syringes - Determination of extractable tungsten
ISO 4790Glass-to-glass sealings - Determination of stresses
ISO 4802-1Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
ISO 4802-2Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 2: Determination by flame spectrometry and classification
ISO 6486-1Ceramic ware, glass ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method
ISO 7086-1Glass hollowware in contact with food - Release of lead and cadmium - Part 1: Test method
Show all 41
ISO 7458Glass containers - Internal pressure resistance - Test methods
ISO 7886-1Sterile hypodermic syringes for single use - Part 1: Syringes for manual use
ISO 7991Glass - Determination of coefficient of mean linear thermal expansion
ISO 8113Glass containers - Resistance to vertical load - Test method
ISO 8424Raw optical glass - Resistance to attack by aqueous acidic solutions - Test method and classification
ISO 9689Raw optical glass - Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 °C - Testing and classification
ISO 10058-3Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10345-2Glass - Determination of stress-optical coefficient - Part 2: Bending test
ISO 10629Raw optical glass - Resistance to attack by aqueous alkaline solutions at 50 degrees C - Test method and classification
ISO 11040-4Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
ISO 11040-6Prefilled syringes - Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
ISO 11455Raw optical glass - Determination of birefringence
ISO 11608-3Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid pathsSome clauses

Limits written next to it

DIN EN ISO 11608-3 2022-09 Abschnitt 5

Some clauses. Written next to it on line 3 of DAKKS certificate D-PL-14645-01-04.

DIN EN ISO 11608-3 2022-09 Abschnitt 4

Some clauses. Written next to it on line 8 of DAKKS certificate D-PL-14645-01-04.

ISO 11608-3 2022-09 Abschnitt 4

Some clauses. Written next to it on line 8 of DAKKS certificate D-PL-14645-01-04.

ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 12677Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method
ISO 13084Surface chemical analysis - Mass spectrometries - Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
ISO 14704Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
ISO 14719Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
ISO 14720-1Testing of ceramic materials - Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials - Part 1: Infrared measurement methods
ISO 15350Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
ISO 15368Optics and photonics - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 18116Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis
ISO 21078-1Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
ISO 21587-1Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica
ISO 21881Sterile packaged ready for filling glass cartridges
ISO 22309Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
ISO 23131Ellipsometry - Principles
DIN20
DIN 12116
DIN 19268
DIN 51001
DIN 51006
DIN 51007
DIN 51045-1
DIN 51081
DIN 51084
DIN 51085
DIN 51086-2
DIN 51086-3
DIN 52296
Show all 20
DIN 52326
DIN 52331
DIN 52340-2
DIN 52340-3
DIN 52340-11
DIN 52341
DIN 52342-2
DIN 52342-7
EN10
EN 01
EN 843-1
EN 843-6
EN 1288-3
EN 1288-5
EN 1388-1
EN 1388-2
EN 12457-2Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 17505
EN 27888Water quality - Determination of electrical conductivity
ISO 8871 series4
ISO 8871-1Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates
ISO 8871-2Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2: Identification and characterization
ISO 8871-3Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 3: Determination of released-particle count
ISO 8871-5Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing
ISO 7884 series3
ISO 7884-1Glass - Viscosity and viscometric fixed points - Part 1: Principles for determining viscosity and viscometric fixed points
ISO 7884-2Glass - Viscosity and viscometric fixed points - Part 2: Determination of viscosity by rotation viscometers
ISO 7884-3Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer
USP3
USP 233
USP 621
USP 730
Other standards2
ASTM C1256
IEC 61189-2-721

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

49 lines
DAKKS

ISO/IEC 17025

Active

D-PL-14645-01-00

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14645-01-01

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14645-01-02

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14645-01-03

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-14645-01-04

View scope

Location

Hattenbergstraße 10, Mainz, 55122, DE

50.01363, 8.24654

Open in Maps

Other Locations

1 other site in this organization

Mainz, DE
View
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.