Registers refreshed 2026-11-08.See refresh dates
Poland

ZE PAK Spółka Akcyjna

ul. Przemysłowa 158, 62-510, Konin, Poland

PCA AB 949ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
55
PCA certificate
1
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 55 standard numbers and the 49 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO36
ISO 562Hard coal and coke - Determination of volatile matter
ISO 1171Coal and coke - Determination of ash
ISO 1928Coal and coke - Determination of gross calorific value
ISO 5068-2Brown coals and lignites - Determination of moisture - Part 2: Indirect gravimetric method for moisture in the analysis sample
ISO 5069-1Brown coals and lignites - Principles of sampling - Part 1: Sampling for determination of moisture content and for general analysis
ISO 5349-1Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements
ISO 5349-2Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace
ISO 5814Water quality - Determination of dissolved oxygen - Electrochemical probe method
ISO 5815-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition
ISO 6058Water quality - Determination of calcium content - EDTA titrimetric method
ISO 6059Water quality - Determination of the sum of calcium and magnesium - EDTA titrimetric method
ISO 6878Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
Show all 36
ISO 7150-1Water quality - Determination of ammonium - Part 1: Manual spectrometric method
ISO 7243Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index
ISO 7730Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 8467Water quality - Determination of permanganate index
ISO 9280Water quality - Determination of sulfate - Gravimetric method using barium chloride
ISO 9297Water quality - Determination of chloride - Silver nitrate titration with chromate indicator (Mohr's method)
ISO 9612Acoustics - Determination of occupational noise exposure - Methodology
ISO 9963-1Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10523Water quality - Determination of pH
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 16948Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen
ISO 16967Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
ISO 16968Solid biofuels - Determination of minor elements
ISO 16994Solid biofuels and pyrogenic biocarbon - Determination of sulfur and chlorine content
ISO 18122Solid biofuels - Determination of ash content
ISO 18123Solid biofuels - Determination of volatile matter
ISO 18125Solid biofuels - Determination of calorific value
ISO 18134-1Solid biofuels - Determination of moisture content - Part 1: Reference method
ISO 18134-3Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample
ISO 18135Solid Biofuels - Sampling
ISO 19579Solid mineral fuels - Determination of sulfur by IR spectrometry
ISO 21644Solid recovered fuels - Methods for the determination of biomass content
EN7
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 1899-2Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
EN 14253Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance

Certificate says EN 14253+A1:2011. Probably the same standard; not checked against the EN document.

EN 15216Environmental solid matrices - Determination of total dissolved solids (TDS) in water and eluates
EN 15408Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
EN 25663Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium
EN 27888Water quality - Determination of electrical conductivity
ISO 5667 series4
ISO 5667-4Water quality - Sampling - Part 4: Guidance on sampling from lakes, natural and man-made
ISO 5667-6Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams
ISO 5667-10Water quality - Sampling - Part 10: Guidance on sampling of waste water
ISO 5667-11Water quality - Sampling - Part 11: Guidance on sampling of groundwaters
Other standards8
G-04584:2001
PN-G-04516:1998
PN-G-04560:1998
PN-G-04571:1998
PN-N-01307:1994Hałas - Dopuszczalne wartości hałasu w środowisku pracy - Wymagania dotyczące wykonywania pomiarów
PN-Z-04008-7:2002+Az1:2004
PN-Z-04507:2022-05Ochrona czystości powietrza - Oznaczanie frakcji wdychalnej aerozolu na stanowiskach pracy metodą grawimetryczną
PN-Z-04508:2022-05

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

15 lines
PCA

ISO/IEC 17025

Active

AB 949

The scope document we hold says it is valid until 2028-09-15.

View on PCA

Location

ul. Przemysłowa 158, Konin, 62-510, PL

52.23019, 18.25211

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.