- Accredited standards
- 10
- INAB certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the INAB scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 10 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.
BS 1377-2
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 1097-5Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
ISO 13953Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 13954Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies
ISO 13956Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test
ISO 17892-1Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
ISO 17892-4Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-12Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
EN 933-1:2012; EN 1097-5:2008; BS 1377-2:2022; EN ISO 17892-1:2014+A1:2022; EN ISO 17892-12:2018+A2:2022; EN ISO 17892-4:2016
ISO 13953:2001; WIS 4-32-08 2016; ISO 13954:1997 +A1:2020; ISO 13956:2010; ISO 13955:1997 + A1 2020
Read from the scope as published by INAB. Register refreshed 2026-11-06.
Scope as published by INAB
3 lines
ISO/IEC 17025
Active398T
Accredited scope, certificate 398T
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | EN ISO/IEC 17025 | - | - |
| 2 | EN 933-1:2012; EN 1097-5:2008; BS 1377-2:2022; EN ISO 17892-1:2014+A1:2022; EN ISO 17892-12:2018+A2:2022; EN ISO 17892-4:2016 | Aggregates; Soils for civil engineering purposes | - |
| 3 | ISO 13953:2001; WIS 4-32-08 2016; ISO 13954:1997 +A1:2020; ISO 13956:2010; ISO 13955:1997 + A1 2020 | Plastics | 1 to 100 kN |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the INAB register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the INAB entry linked above.