FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates
United States

Accurate Weldment Testing

1012 Granada Drive, 70560, New Iberia, LA, United States

A2LA|3398.01ISO/IEC 17025Register refreshed 2026-09-25
Certificates
1
Scope items
3
Standards
9
Locations
1

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Follow this lab

We will email you if this laboratory’s accreditation status or scope changes. No newsletter, only changes.

Work at Accurate Weldment Testing?

Claim this profile to keep it accurate.

Register record

A2LARefreshed
3398.01Active

Accredited standards

9

Our reading of the A2LA scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
As written on the certificate · Line 1 (A2LA 3398.01)

ASTM A370; ASTM E18; ASTM E92; ASTM E384; ASTM E3

As written on the certificate · Line 2 (A2LA 3398.01)

ASTM E340; ASTM A703; ASTM A370; ASTM E415; ASTM G48

ASTM A703Name not checked yet
As written on the certificate · Line 2 (A2LA 3398.01)

ASTM E340; ASTM A703; ASTM A370; ASTM E415; ASTM G48

ASTM E3Standard Guide for Preparation of Metallographic Specimens
As written on the certificate · Line 1 (A2LA 3398.01)

ASTM A370; ASTM E18; ASTM E92; ASTM E384; ASTM E3

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
As written on the certificate · Line 1 (A2LA 3398.01)

ASTM A370; ASTM E18; ASTM E92; ASTM E384; ASTM E3

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
As written on the certificate · Line 1 (A2LA 3398.01)

ASTM A370; ASTM E18; ASTM E92; ASTM E384; ASTM E3

ASTM E340Standard Practice for Macroetching Metals and Alloys
As written on the certificate · Line 2 (A2LA 3398.01)

ASTM E340; ASTM A703; ASTM A370; ASTM E415; ASTM G48

ASTM E384Standard Test Method for Microindentation Hardness of Materials
As written on the certificate · Line 1 (A2LA 3398.01)

ASTM A370; ASTM E18; ASTM E92; ASTM E384; ASTM E3

ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
As written on the certificate · Line 2 (A2LA 3398.01)

ASTM E340; ASTM A703; ASTM A370; ASTM E415; ASTM G48

ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
As written on the certificate · Line 2 (A2LA 3398.01)

ASTM E340; ASTM A703; ASTM A370; ASTM E415; ASTM G48

Scope as published by A2LA

3 lines
A2LA

ISO/IEC 17025

Active

3398.01

The scope document we hold says it is valid until 2027-01-31.

View scope

Accredited scope, certificate 3398.01

LineDisciplineMethodMatrixRange
1Mechanical TestingASTM A370; ASTM E18; ASTM E92; ASTM E384; ASTM E3Metal-321 to 212 °F
2Chemical TestingASTM E340; ASTM A703; ASTM A370; ASTM E415; ASTM G48Fe-Base: Al, B, C, Ca, Co, Cr, Cu, Mn, Mo, Nb, Ni, P, Pb, S, Si, Sn, Ti, V, W; Ni-Base: Al, B, C, Co, Cr, Cu, Fe, Mg, Mn, Mo, Nb, P, Pb, S, Si, Sn, Ti, V, W, Zrto 220000 pounds
3Mechanical TestingISO/IEC 17025:2017; ISO-ILAC-IAF Communiqué dated April 2017; IEC 17025--

Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

1012 Granada Drive, New Iberia, LA, 70560, US

30.00354, -91.81873

Open in Maps
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.