Registers refreshed 2026-11-08.See refresh dates
Germany

Evonik Operations GmbH Sicherheitstechnisches Prüfzentrum

Rodenbacher Chaussee 4, 63457, Hanau-Wolfgang, Germany

DAKKS D-PL-21594-05-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
16
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 16 standard numbers and the 4 official names we hold. When no standard matches, it searches the method text of every scope line.

EN6
EN 1839
EN 13631-3
EN 13631-4
EN 15188
EN 15794
EN 17077
EN 14034 series4
EN 14034-1
EN 14034-2
EN 14034-3
EN 14034-4
ISO4
ISO 2719Determination of flash point - Pensky-Martens closed cup method
ISO 3679Determination of flash point - Method for flash no-flash and flash point by small scale closed cup tester
ISO/IEC 80079-20-1Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
ISO/IEC 80079-20-2Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods
Other standards2
DIN 51007
DIN 51794

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

8 lines
DAKKS

ISO/IEC 17025

Active

D-PL-21594-05-00

View scope

Accredited scope, certificate D-PL-21594-05-00

LineMethodMatrixRange
1-combustible dusts and liquids as well as gases and vapors
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

This certificate annex is only valid together with the written accreditation certificate and reflects the status as indicated by the date of issue. The current status of any given scope of accreditation can be found in the directory of accredited bodies maintained by Deutsche Akkreditierungsstelle GmbH at https://www.dakks.de. Abbreviations used: see last page Page 1 of 8 This document is a translation. The definitive version is the original German annex to the accreditation certificate. Deutsche Akkreditierungsstelle Annex to the Accreditation Certificate D-PL-21594-05-00 according to DIN EN ISO/IEC 17025:2018 Valid from: 29.07.2024 Date of issue: 14.04.2025 Holder of accreditation certificate: Evonik Operations GmbH Rellinghauser Straße 1-11, 45128 Essen with the locations Evonik Operations GmbH Sicherheitstechnisches Prüfzentrum Rodenbacher Chaussee 4, 63457 Hanau-Wolfgang Evonik Operations GmbH Sicherheitstechnisches Prüfzentrum Paul-Baumann-Straße 1, 45764 Marl The testing laboratory meets the requirements of DIN EN ISO/IEC 17025:2018 to carry out the conformity assessment activities listed in this annex. The testing laboratory meets additional legal and normative requirements, if applicable, including those in relevant sectoral schemes, provided that these are explicitly confirmed below. The management system requirements of DIN EN ISO/IEC 17025 are written in the language relevant to the operations of testing laboratories and they conform to the principles of DIN EN ISO 9001. Tests in the following areas physical, physico-chemical and chemical tests for safety and transport-relevant properties of combustible dusts and liquids as well as gases and vapors The testing laboratory is permitted to use the standardized or equivalent test methods listed here with different issue dates without the need for prior information and approval by DAkkS.
-
2DIN 51007; Verordnung (EG) Nr. 440/2008 Methode A.9; Verordnung (EG) Nr. 440/2008 Methode A.10; Verordnung (EG) Nr. 440/2008 Methode A.12; SPZ-SOP-102; SPZ-SOP-103; SPZ-SOP-105substances and mixtures of substances-
3Verordnung (EG) Nr. 440/2008 Methode A.13; Verordnung (EG) Nr. 440/2008 Methode A.14; DIN EN 13631-4; DIN EN 13631-3; Verordnung (EG) Nr. 440/2008 Methode A.15; Verordnung (EG) Nr. 440/2008 Methode A.16; Verordnung (EG) Nr. 440/2008 Methode A.17; Verordnung (EG) Nr. 440/2008 Methode A.21Solids-
4EN ISO/IEC 80079-20-2; DIN EN 14034-4; DIN EN 14034-3; DIN EN 14034-1; DIN EN 14034-2; DIN EN 17077; VDI 2263 Blatt 1; DIN EN 15188; SPZ-SOP-701; DIN EN ISO 2719; DIN EN ISO 3679; DIN 51794combustible dusts; flammable liquids, gases and vapors; solid materials; mineral oil hydrocarbons-
5DIN EN ISO/IEC 80079-20-1; DIN EN 15794; DGUV Vorschrift 13; DIN EN 1839; UN MTC Rev.7; UN MTC Rev.7; UN MTC Rev.7; UN MTC Rev.7substances and substance mixtures; flammable liquids; liquid organic peroxides-
6UN MTC Rev.7; DIN EN 13631-4; DIN EN 13631-3Explosives-
7UN MTC Rev.7--
8UN MTC Rev.7; UN‐Test N.4; UN MTC Rev.7; UN-Test O.1; UN MTC Rev.7; UN-Test O.2; DIN 51007; SPZ-SOP-102; SPZ-SOP-103substances and mixtures of substances-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Rodenbacher Chaussee 4, Hanau-Wolfgang, 63457, DE

50.11958, 8.96512

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.