Ireland

MTS Ltd t/a MTS

Name: MTS Ltd t/a MTS
Address: Pollerton Road, Carlow, IE

Pollerton Road, Carlow, Ireland

INAB|120TISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open INAB register entry

Work at MTS Ltd t/a MTS?

Claim this profile to keep it accurate.

Register record

INABRefreshed 2026-09-25: 120TActive

Accredited standards

Our reading of the INAB scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

EN

EN 932-1Tests for general properties of aggregates - Part 1: Methods for sampling

As written on the certificate · Line 12 (INAB 120T)

IS EN 12350-1: 2019; IS EN 12350-2: 2019; IS EN 12390-2:2019; IS EN 12390-2:2019; BS 1377: Part 2: 2022 Clause 13; CC-SPW-00800 October 2023: Annex A; BS 1377: Part 9: 1990 Clause 2.2; BS 1377: Part 9:1990 Section 2.5; Documented In House Procedure: CSOP142.1 based on BS1377: Part 9-1990 (CBR calculation using NRA DMRB Vol 7, Section 2, Part 2A HD 25-26/10); Documented In House Procedure: CSOP142.2 based on BS1377: Part 9-1990 (CBR calculation using NRA DMRB Vol 7, Section 2, Part 2A HD 25-26/10); EN 932 -1: 1997

EN 1367-2Name not checked yet

As written on the certificate · Line 7 (INAB 120T)

IS EN 933-9: 2022; IS EN 1097-1 : 2011; EN13450 Annex E; IS EN 1097-2 : 2020; IS EN 13450 Annex C; IS EN1097-5: 2008; IS EN 1097-6:2022; IS EN 1097-8 : 2020; IS EN 1367 -2:2009; IS EN13286-4: 2021; IS EN 12697-28: 2020; IS EN12697-29: 2020; IS EN 12697-37: 2003

EN 1426Bitumens and bituminous binders - Determination of needle penetration

As written on the certificate · Line 8 (INAB 120T)

IS EN 12697 -39: 2020; CSOP056; IS EN 12697 - 1: 2020; CSOP005; IS EN 12697-1: 2020; CSOP062; IS EN 12697-3: 2013 +A1: 2018; IS EN 12697-2: 2015+A1:2019; CSOP057; IS EN 12697-5: 2018; CSOP049; IS EN12697-11: 2020: Clause 6; CSOP065; IS EN 12697-6: 2020; CSOP052; IS EN 12697-8: 2018; CSOP054; EN 12697-32: 2019; CSOP066; EN 1427: 2015; CSOP036; IS EN 1431: 2018; CSOP047; IS EN 1431: 2018; IS EN 1426: 2015; CSOP037; IS EN 1429: 2013; CSOP038; IS EN 1428: 2012; CSOP039; IS EN 13075-1: 2016; CSOP045

EN 1427Bitumens and bituminous binders - Determination of the softening point - Ring and Ball method

As written on the certificate · Line 8 (INAB 120T)

EN 1428Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

EN 1429Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

EN 1431Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

EN 12350-1Testing fresh concrete - Part 1: Sampling and common apparatus

As written on the certificate · Line 12 (INAB 120T)

EN 12350-2Testing fresh concrete - Part 2: Slump-test

As written on the certificate · Line 12 (INAB 120T)

EN 12390-2Testing hardened concrete - Part 2: Making and curing specimens for strength tests

As written on the certificate · Line 12 (INAB 120T)

EN 12390-7Testing hardened concrete - Part 7: Density of hardened concrete

As written on the certificate · Line 6 (INAB 120T)

IS EN12390-2:2019; CSOP004; EN12390-3 : 2019; CSOP019; IS EN 12504-1: 2019 +AC2020; CSOP034; IS EN 12390-7 : 2019; CSOP008; EN932-2:1999; CSOP082; IS EN 933 -1:2012; CSOP079; IS EN 933-1: 2012; CSOP079; IS EN 933-3 : 2012; CSOP076; Documented In House Procedure: CSOP100 (based on I.S. EN13450); IS EN 933-5: 1998 : Amd. 1: 2004; CSOP089; I.S. EN 933-9 : 2022; CSOP097; IS EN 933-9: 2022; I.S. EN 933-9: 2022

EN 12504-1Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression

As written on the certificate · Line 6 (INAB 120T)

EN 13036-1Name not checked yet

As written on the certificate · Line 13 (INAB 120T)

IS EN 12697-27: 2017; CD004/IHT003.01.3; BS594987:2015; CSOP007.1; CSOP149; IS EN 13036-1: 2010; CSOP070; CSOP048; TRL SR 290; IS EN 13036-4: 2011; CSOP087; BS 7976-2: 2002 (+A1: 2013); CSOP086

EN 13036-4Name not checked yet

As written on the certificate · Line 10 (INAB 120T)

BS 6100: 1992 Clause 2.2.1 / CSOP126; BS1377-2: 2022 Clause 11; BS 1377 Part 2: 2022 Clause 11 / CSOP123; BS 1377 Part 2: 2022 Clause 11 / CSOP124; BS 1377 Part 2: 2022 Clause 11 / CSOP125; BS1377-2: 2022 Clause 13; BS 1377 Part 2: 2022 Clause 13 / CSOP118; BS1377-2: 2022 Clause 15; IS EN 13036-4: 2011 / CSOP087; BS 7976-2: 2002 (+A1: 2013) / CSOP108

As written on the certificate · Line 13 (INAB 120T)

IS EN 12697-27: 2017; CD004/IHT003.01.3; BS594987:2015; CSOP007.1; CSOP149; IS EN 13036-1: 2010; CSOP070; CSOP048; TRL SR 290; IS EN 13036-4: 2011; CSOP087; BS 7976-2: 2002 (+A1: 2013); CSOP086

EN 13075-1Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

EN 13286-4Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 13450Name not checked yet

As written on the certificate · Line 7 (INAB 120T)

EN 12697 series

EN 12697-1Bituminous mixtures - Test methods - Part 1: Soluble binder content

As written on the certificate · Line 8 (INAB 120T)

EN 12697-2Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

As written on the certificate · Line 8 (INAB 120T)

EN 12697-3Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

EN 12697-5Bituminous mixtures - Test methods - Part 5: Determination of the maximum density

As written on the certificate · Line 8 (INAB 120T)

EN 12697-6Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens

As written on the certificate · Line 8 (INAB 120T)

EN 12697-8Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens

As written on the certificate · Line 8 (INAB 120T)

EN 12697-27Bituminous mixtures - Test methods - Part 27: Sampling

As written on the certificate · Line 13 (INAB 120T)

IS EN 12697-27: 2017; CD004/IHT003.01.3; BS594987:2015; CSOP007.1; CSOP149; IS EN 13036-1: 2010; CSOP070; CSOP048; TRL SR 290; IS EN 13036-4: 2011; CSOP087; BS 7976-2: 2002 (+A1: 2013); CSOP086

EN 12697-28Name not checked yet

As written on the certificate · Line 7 (INAB 120T)

EN 12697-32Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

EN 12697-37Name not checked yet

As written on the certificate · Line 7 (INAB 120T)

EN 12697-39Name not checked yet

As written on the certificate · Line 8 (INAB 120T)

ISO

ISO 5667-5Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems

As written on the certificate · Line 3 (INAB 120T)

ISO 7899-2 2000 / WSOP003; ISO 14189 2013 / WSOP004; ISO 9308-1 2014 +A1: 2016 / WSOP002; EPA Quick Guide to drinking water sample collection, 2nd Edition Sept 2016 / WSOP005; ISO 19458 2006 Clause 4.4.1 / WSOP005; ISO 5667-5 2006

ISO 7899-2Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method

As written on the certificate · Line 3 (INAB 120T)

ISO 9308-1Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora

As written on the certificate · Line 3 (INAB 120T)

ISO 13953Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

As written on the certificate · Line 14 (INAB 120T)

ISO 13953: 2001 +A1: 2020; ISO 13956: 2010; ISO 13954: 1997 +A1: 2020; ISO 13955: 1997

ISO 13954Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

As written on the certificate · Line 14 (INAB 120T)

ISO 13953: 2001 +A1: 2020; ISO 13956: 2010; ISO 13954: 1997 +A1: 2020; ISO 13955: 1997

ISO 13955Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies

As written on the certificate · Line 14 (INAB 120T)

ISO 13953: 2001 +A1: 2020; ISO 13956: 2010; ISO 13954: 1997 +A1: 2020; ISO 13955: 1997

ISO 13956Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test

As written on the certificate · Line 14 (INAB 120T)

ISO 13953: 2001 +A1: 2020; ISO 13956: 2010; ISO 13954: 1997 +A1: 2020; ISO 13955: 1997

ISO 14189Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration

As written on the certificate · Line 3 (INAB 120T)

ISO 19458Water quality - Sampling for microbiological analysis

As written on the certificate · Line 3 (INAB 120T)

EN 772 series

EN 772-1Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 772-11Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 772-13Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 772-14Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 772-16Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 772-20Name not checked yet

As written on the certificate · Line 11 (INAB 120T)

IS EN 13286-4: 2021; EN 772-16:2011; IS EN 772-1: 2011 + A1: 2015; EN 772-11: 2011; I.S. EN 772-13: 2000; EN 772-20: 2000; EN 772-14: 2002

EN 1097 series

EN 1097-1Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)

As written on the certificate · Line 7 (INAB 120T)

EN 1097-2Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation

As written on the certificate · Line 7 (INAB 120T)

EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption

As written on the certificate · Line 7 (INAB 120T)

EN 1097-8Name not checked yet

As written on the certificate · Line 7 (INAB 120T)

EN 933 series

EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

As written on the certificate · Line 6 (INAB 120T)

EN 933-3Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index

As written on the certificate · Line 6 (INAB 120T)

EN 933-5Name not checked yet

As written on the certificate · Line 6 (INAB 120T)

EN 933-9Name not checked yet

As written on the certificate · Line 6 (INAB 120T)

As written on the certificate · Line 7 (INAB 120T)

ISO 17892 series

ISO 17892-1Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content

As written on the certificate · Line 9 (INAB 120T)

IS EN16345: 2012; CSOP098; IS EN ISO 17892-1: 2014 & A1: 2022; IS EN ISO 17892-1:2014 / CSOP114; BS 1377 Part 2: 2022 Clause 4.3 / CSOP116; BS1377-2: 2022 Clause 4.1; BS1377-2: 2022 Clause 5.2; BS 1377 Part 2: 2022 Clause 5.2 Definatitive Method / CSOP117; BS 1377 Part 2: 2022 Clause 5.3 / CSOP117; BS1377-2: 2022 Clause 6; BS 1377 Part 2: 2022 Clause 6 / CSOP118; IS EN ISO 17892-12: 2018 + A1: 2021 & A2: 2022 / CSOP119; BS1377-2: 2022 Clause 6; BS 1377 Part 2: 2022 Clause 6 / CSOP110; BS1377-2: 2022 Clause 9.2; IS EN ISO 17892-4:2016 / CSOP112; BS1377-2: 2022 Clause 10; BS 1377 Part 2: 2022 Clause 10 / CSOP092

ISO 17892-4Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

As written on the certificate · Line 9 (INAB 120T)

ISO 17892-12Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits

As written on the certificate · Line 9 (INAB 120T)

Scope as published by INAB

14 lines

INAB

ISO/IEC 17025

Active

120T

View scope

Location

Pollerton Road, Carlow, IE

52.83656, -6.92128

Open in Maps

← All accredited testing labs in Ireland

Accreditation data refreshed from the INAB register on 2026-09-25.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the INAB entry linked above.