United Kingdom

Special Melted Products

Blackmore Street, S4 7TZ, Sheffield, United Kingdom

UKAS 0638ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 17
UKAS certificate: 1
Site in our directory: 1

UKAS accredited scope

What this lab is accredited for

Our reading of the UKAS scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 17 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM8

ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials

ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

ASTM E112Standard Test Methods for Determining Average Grain Size

ASTM E384Standard Test Method for Microindentation Hardness of Materials

ISO8

ISO 1077

ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

ISO 3887Steels - Determination of the depth of decarburization

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature

Other standards1

BS 6286

Read from the scope as published by UKAS. Register refreshed 2026-11-06.

Scope as published by UKAS

4 lines

UKAS

ISO/IEC 17025

Active

0638

View scope

Accredited scope, certificate 0638

Line	Method	Matrix	Range
1	ISO/IEC 17025:2017	-	-
2	ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; IEC 17025; in-house Method using	Metal	-
3	BS EN ISO 3651-2:1998 ASTM A262-15; BS EN ISO 6892-1:2019 Method B BS EN ISO 6892-2:2018 Method B ASTM E8/E8M-24 ASTM A370-24a ASTM E21-20; BS EN ISO 6506-1:2014 ASTM E10-23; BS EN ISO 6507-1:2023 A Vickers micro-indentation ASTM E384-2022 BS EN ISO 1077 Met013; BS EN ISO 6508-1:2023 ASTM E18:24	Metal	See scope document
4	BS EN ISO 3887:2023 BS 6286:1982 Documented In-House Method MET-072-LTD A Grain size ASTM E112-13; BS 6286; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; ISO 3887:2023 BS 6286:1982 Documented In-House Method MET-072-LTD A Grain size ASTM E112-13; IEC 17025	Metal	-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Blackmore Street, Sheffield, S4 7TZ, GB

53.39152, -1.44646

Open in Maps

← All accredited testing labs in United Kingdom

Labs with overlapping accredited scope in United Kingdom

Accreditation data refreshed from the UKAS register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the UKAS entry linked above.