United States

Avient Corporation - Analytical Solutions

33587 Walker Road, 44012, Avon Lake, OH, United States

A2LA 514.01A2LA 514.02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 51
A2LA certificates: 2
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 51 standard numbers and the 27 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM27

ASTM D256

ASTM D412

ASTM D523Standard Test Method for Specular Gloss

ASTM D618

ASTM D624

ASTM D635

ASTM D638Standard Test Method for Tensile Properties of Plastics

ASTM D648

ASTM D746

ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

ASTM D882

Show all 27

ASTM D1004

ASTM D1238

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

ASTM D2244

ASTM D2565

ASTM D3418

ASTM D3763

ASTM D3801

ASTM D5048

ASTM D5132

ASTM E794

ASTM E831

ASTM E1131

ASTM E1252

ASTM E1356

ISO17

ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces

ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method

ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

ISO 178Plastics - Determination of flexural properties

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

ISO 180Plastics - Determination of Izod impact strength

ISO 291Plastics - Standard atmospheres for conditioning and testing

ISO 812Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°

Show all 17

ISO 3785Metallic materials - Designation of test specimen axes in relation to product texture

ISO 6603-2Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing

ISO 7619-1Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

ISO 7724-3Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences

ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

ISO 527 series5

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites

Other standards2

IEC 60695-11-10

IEC 60695-11-20

Read from the A2LA scope documents we downloaded on 2026-10-27. Register refreshed 2026-11-06.

Scope as published by A2LA

4 lines

A2LA

ISO/IEC 17025

Active

514.01

The scope document we hold says it is valid until 2028-09-30.

View scope

Accredited scope, certificate 514.01

Line	Method	Matrix	Range
1	ASTM D746; ISO 812; ISO 179-1; ASTM D2244; E1331; ISO 7724; ASTM D618; ISO 291; ASTM D648; ISO 75-1; ISO 75-2; ASTM D2240; ISO 7619-1; ASTM D790; ISO 178; ASTM D1238; ISO 1133; ASTM D256; ISO 180; ASTM D3763; ISO 6603-2; ASTM D792; ISO 1183-1; ASTM D523; ISO 2813; FLTM BO 061-01; ASTM D624; ASTM D1004; ISO 34; ASTM D412; ASTM D638; ASTM D882; ISO 37; ISO 527-1; ISO 527-2; ISO 527-3; ISO 527-4; ISO 527-5; ASTM D2565; G155; SAE J2412; SAE J2527; FLTM BO-116-01	rubber and plastics	-
2	ISO/IEC 17025:2017	-	-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

A2LA

ISO/IEC 17025

Active

514.02

The scope document we hold says it is valid until 2027-09-30.

View scope

Accredited scope, certificate 514.02

Line	Method	Matrix	Range
1	ASTM E1252; ASTM D635; UL 94; IEC 60695-11-10; ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785; ASTM D3801; ASTM D5048; IEC 60695-11-20; IEC 60695 2-10; IEC 60695 2-11; IEC 60695 2-12; IEC 60695 2-13; UL 2556 Sec. 9.1; UL 2556 Sec. 9.4; UL 2556 Sec. 9.5; ASTM D3418; ASTM E794; ASTM E1356; ASTM E1131; ASTM E831; ISO 11359-2	rubber and plastics	-
2	ISO/IEC 17025:2017	-	-

Location

33587 Walker Road, Avon Lake, OH, 44012, US

41.49347, -82.05088

Open in Maps

← All accredited testing labs in Ohio

← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.