Registers refreshed 2026-11-08.See refresh dates
Italy

FORGE FEDRIGA

via Cavalier Andrea Bellicini, 12, 25040, Berzo Inferiore, Italy

Visit website
ACCREDIA 01288ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
41
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 41 standard numbers and the 28 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM25
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A604
ASTM A751
ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM B381
ASTM E3Standard Guide for Preparation of Metallographic Specimens
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E10Standard Test Method for Brinell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E10-23 - escluso/except par 5.7 _

Exclusion. Written next to it on line 3 of ACCREDIA certificate 01288.

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic MaterialsExclusion

Limits written next to it

ASTM E18-24 - escluso/except par 5.8 _

Exclusion. Written next to it on line 3 of ACCREDIA certificate 01288.

ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E45Standard Test Methods for Determining the Inclusion Content of Steel
Show all 25
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E112Standard Test Methods for Determining Average Grain SizeSome clauses

Limits written next to it

ASTM E112-24 - solo/only par.

Some clauses. Written next to it on line 3 of ACCREDIA certificate 01288.

ASTM E340Standard Practice for Macroetching Metals and Alloys
ASTM E381
ASTM E407Standard Practice for Microetching Metals and Alloys
ASTM E415Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E562Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E930Some clauses

Limits written next to it

ASTM E930-18 - solo/only Par.

Some clauses. Written next to it on line 3 of ACCREDIA certificate 01288.

ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1181
ASTM E3047
ASTM G28
ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ISO11
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 4967Steel - Determination of the non-metallic inclusion content - Micrographic methodSome methods

Limits written next to it

ISO 4967:2013 - solo/only met A e B Microscopia ottica

Some methods. Written next to it on line 2 of ACCREDIA certificate 01288.

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature
ISO 17781Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steelsSome clauses

Limits written next to it

ISO 17781:2017 - solo/only Par.

Some clauses. Written next to it on line 2 of ACCREDIA certificate 01288.

EN3
EN 10002-1
EN 10002-5
EN 10045-1
Other standards2
NF A05-150
NF A05-152

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

4 lines
ACCREDIA

ISO/IEC 17025

Active

01288

View scope

Accredited scope, certificate 01288

LineMethodMatrixRange
1UNI CEI EN ISO/IEC 17025:2018; ASTM A751-21; ASTM E415-21; ASTM E1086-22; UNI EN ISO 3651-1:2000; UNI EN ISO 3651-2:2000/EC1:2002; ASTM A262-15(2021)Acciai austenitici/Austenitic steels; Acciai basso legati/Low alloy steels; Acciai/Steels; Acciai inossidabili austenitico/Austenitic stainless steels; Acciai inossidabili ferritici/austenitici (duplex)/Ferritic/austenitic (duplex) stainless steels; Acciai inossidabili ferritici/Stainless ferritic steels; Acciai inossidabili non austenitici (1)/Non austenitic stainless (1); Acciai inossidabili/Stainless steels-
2ASTM A923-23 Met C; ASTM A923-25 Met C; ISO 17781:2017; ASTM A262-15(2021) Met A; ASTM A262-15(2021) Met E; ASTM G48-11(2020)e1 Met A; UNI EN ISO 643:2013; UNI EN ISO 643:2020; UNI EN ISO 643:2024; NF A05-150:1985; ISO 4967:2013; ASTM E45-18a(2023); ASTM E45-25; ASTM A604/A604M-07(2022); ASTM E381-22; ASTM G28-24 Met A; ASTM E3047-22; API 6ACRA 2015 par 4.2.2.3; API 6ACRA 2025 par 4.2.2.3; API 6ACRA 2015 par 4.2.1 + ASTM A604/A604M-07(2022); API 6ACRA 2025 par 4.2.1 + ASTM A604/A604M-07(2022); ASTM B381Acciai inossidabili/Stainless steels; Leghe di Nichel/Nickel alloys; Acciai/Steels; Barre d'acciaio/Steel bars; Billette /Billets; Blumi/Blooms; Fucinati/Forgings; Leghe di nichel con presenza di cromo/Nickel-Rich chromium-bearing alloys; Leghe di Titanio/Titanium Alloys; Alluminio/Aluminium; Boro/Boron; Carbonio/Carbon; Cobalto/Cobalt; Cromo/Chromium; Ferro/Iron; Fosforo/Phosphorus; Magnesio/Magnesium; Manganese/Manganese; Molibdeno/Molybdenum; Nichel/Nickel; Niobio/Niobium; Rame/Copper; Silicio/Silicon; Stagno/Tin; Titanio/Titanium; Tungsteno/Tungsten; Vanadio/Vanadium; Zolfo/Sulphur0 to 300 kN
3ASME BPVC II.b SB 381:2023 + ASTM E8/E8M-16a; ASME BPVC II.b SB 381:2023 + ASTM E8/E8M-16ae1; ASME BPVC II.b SB 381:2023 + ASTM E8/E8M-22; ASME BPVC II.b SB 381:2023 + ASTM E8/E8M-24; ASME BPVC II.b SB 381:2023 + ASTM E8/E8M-25; ASME BPVC II.b SB 381:2025 + ASTM E8/E8M-25; ASTM E340-15; ASTM E340-23; MI-PT27 Rev.9 anno 2025; ASTM E930-18; ASTM E1181-02(2023); ASTM E112-24; EN ISO 6506-1:2014; UNI EN ISO 6506-1:2015; ASTM E10-23; ASME BPVC II.a SA 370:2023; ASME BPVC II.a SA 370:2025; ASTM A370-24a; EN ISO 6508-1:2023; ISO 6508-1:2023; UNI EN ISO 6508-1:2024; ASTM E18-24; EN ISO 6507-1:2023; ISO 6507-1:2023; UNI EN ISO 6507-1:2023; ASTM E92-23; NF A05-152:1984; ASTM E3-11(2025) + ASTM E407-23; ASTM E562-19e1; EN ISO 148-1:2016; ISO 148-1:2016; UNI EN ISO 148-1:2016Metal0 to 450 J
4EN 10045-1:1990; UNI EN 10045-1:1992; EN 10002-1:2001; UNI EN 10002-1:1992; EN ISO 6892-1:2009; EN ISO 6892-1:2016; EN ISO 6892-1:2019; ISO 6892-1:2009; ISO 6892-1:2016; ISO 6892-1:2019; UNI EN ISO 6892-1:2009; UNI EN ISO 6892-1:2016/EC1:2018; UNI EN ISO 6892-1:2020; ASTM E8/E8M-16a; ASTM E8/E8M-16ae1; ASTM E8/E8M-22; ASTM E8/E8M-24; ASTM E8/E8M-25; EN ISO 6892-2:2011; EN ISO 6892-2:2018; ISO 6892-2:2011; ISO 6892-2:2018; UNI EN ISO 6892-2:2011; UNI EN ISO 6892-2:2018; ASTM E21-20; EN 10002-5:1991-0 to 450 J

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

via Cavalier Andrea Bellicini, 12, Berzo Inferiore, 25040, IT

45.93169, 10.28059

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.