Tensile Testing Services
Clare, Ireland
- Accredited standards
- 9
- INAB certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the INAB scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 9 standard numbers and the 6 official names we hold. When no standard matches, it searches the method text of every scope line.
EN 1555-2Some clauses
Limits written next to it
EN 1555-2:2025 (Clause 6)
EN 12201-2Some clauses
Limits written next to it
EN 12201-2:2024 (Clause 6)
EN 12814-4
ISO 3126Plastics piping systems - Plastics components - Determination of dimensions
ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 13953Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 13954Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies
ISO 13956Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test
ISO 13955:1997/Amd 1:2020; EN ISO 3126:2005; EN 1555-2:2025; EN 12201-2:2024
ISO 13953:2001/Amd 1:2020; ISO 13954:2025-11; IS EN 12814-4:2018; ISO 13956:2025-11; WIS 4-32-08 - June 2016 Issue 4; ISO 6259-3: 2015
Read from the scope as published by INAB. Register refreshed 2026-11-06.
Scope as published by INAB
4 lines
ISO/IEC 17025
Active276T
Accredited scope, certificate 276T
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | Extracted from the scope document; tables may not line up. View scope for the original. INAB Registration No. 276T
Page 1 of 4
Edition 4, 15/05/2026
Schedule of
Accreditation
Organisation Name
Tensile Testing Services Limited
Trading As
INAB Reg No
276T
Contact Name
Joseph Birney
Address
Unit C11, Smithstown Industrial Estate, Shannon,
Clare, V14 RW56
Contact Phone No
061 703655
Email
info@tensiletestingservices.ie
Website
http://www.tensiletestingservices.ie
Accreditation Standard
EN ISO/IEC 17025 T
Standard Version
2017
Date of award of accreditation
07/12/2010
Scope Classification Mechanical Testing
Services available to the public¹
Yes
¹ Refer to document on interpreting INAB Scopes of Accreditation | ||
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. INAB Registration No. 276T
Page 2 of 4
Edition 4, 15/05/2026
Sites from which accredited services are delivered
(the detail of the accredited services delivered at each site are on the Scope of Accreditation)
Name Address
1 Tensile Testing Services
Ltd.
Unit C11, Smithstown Industrial Estate, Shannon, Clare, Ireland, V14
RW56 | ||
| 3 | ISO 13953:2001/Amd 1:2020; ISO 13954:2025-11; IS EN 12814-4:2018; ISO 13956:2025-11; WIS 4-32-08 - June 2016 Issue 4; ISO 6259-3: 2015 | Plastic and related products; Thermoplastic Pipes and Welds; Thermoplastic Pipe and Pipe Assemblies | 5 to 50000 N |
| 4 | ISO 13955:1997/Amd 1:2020; EN ISO 3126:2005; EN 1555-2:2025; EN 12201-2:2024 | thermoplastic pipes and welds; Thermoplastic Pipe and Pipe Assemblies | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the INAB register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the INAB entry linked above.