KEA Technologies
1 Monarch Drive, Suite 100, 01460, Littleton, MA, United States
Visit website- Accredited standards
- 7
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 7 standard numbers and the 4 official names we hold. When no standard matches, it searches the method text of every scope line.
EN 50436-1
EN 50436-2
EN 50980-1
IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 16750-3Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
ISO 16750-4Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
EN 50436-1; EN 50436-2; CSA Z627; NHTSA-2013-26849; Federal Register / Vol. 78, No. 89; NHTSA-2015-16720; Federal Register / Vol. 80, No. 60; SAE J3214; EN 50980-1; ISO 16750-4; IEC 60068-2-78; ISO 16750-2; ISO 16750-3
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
2 lines
ISO/IEC 17025
Active5225.01
The scope document we hold says it is valid until 2027-01-31.
Accredited scope, certificate 5225.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | EN 50436-1; EN 50436-2; CSA Z627; NHTSA-2013-26849; Federal Register / Vol. 78, No. 89; NHTSA-2015-16720; Federal Register / Vol. 80, No. 60; SAE J3214; EN 50980-1; ISO 16750-4; IEC 60068-2-78; ISO 16750-2; ISO 16750-3 | Breath Alcohol Measuring Instruments | -40 to 125 °C |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. For the types of tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
KEA TECHNOLOGIES, INC.
Littleton, MA
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 8th day of January 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 5225.01
Valid to January 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.