Germany
Institut für Korrosionsschutz Dresden GmbH Privatwirtschaftliche Forschungsstelle
Gostritzer Straße 65, 01217, Dresden, Germany
DAKKS D-PL-19138-01-00ISO/IEC 17025Register refreshed 2026-11-06
- Accredited standards
- 67
- DAKKS certificate
- 1
- Site in our directory
- 1
DAKKS accredited scope
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 67 standard numbers and the 57 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO41
ISO 1460Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)
ISO 1520Paints and varnishes - Cupping test
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2808Paints and varnishes - Determination of film thickness
ISO 2810Paints and varnishes - Natural weathering of coatings - Exposure and assessment
ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
ISO 3231Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 3233-3Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
Show all 41
ISO 3251Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 4288Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
ISO 4623-1Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates
ISO 4623-2Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 6270-1Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6272-1Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6509-1Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method
ISO 6957Copper alloys - Ammonia test for stress corrosion resistance
ISO 8503-4Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
ISO 9117-3Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
ISO 9117-5Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9514Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing
ISO 11341Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation
ISO 11507Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
ISO 11664-4Colorimetry - Part 4: CIE 1976 L*a*b* Colour space
ISO 11997-1Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
ISO 12944-6Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO 12944-9Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
ISO 14680-1Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method
ISO 14680-2Paints and varnishes - Determination of pigment content - Part 2: Ashing method
ISO 15711Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water
ISO 16276-2Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing
ISO 16862Paints and varnishes - Evaluation of sag resistance
ISO 19840Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
DIN9
DIN 18219
DIN 50905-1
DIN 50905-2
DIN 50905-3
DIN 50916-2
DIN 50918
DIN 53211
DIN 55634-1
DIN 74069
ISO 4628 series9
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-6Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
ISO 4628-7Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 4628-10Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO 16474 series3
ISO 16474-1Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
ISO 16474-2Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 2812 series3
ISO 2812-1Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
ISO 2812-2Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
ISO 2812-3Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
Other standards2
EN 3665
IEC 60068-2-30Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DIN EN ISO 1460; DIN EN ISO 2178; DIN EN ISO 2360; DIN 50905 -1
DIN EN ISO 11341; DIN EN ISO 11507; DIN EN ISO 16474 -1; DIN EN ISO 16474 -2; DIN EN ISO 16474 -3; DIN EN ISO 2808; ISO 19840; DIN EN ISO 1519; DIN EN ISO 1520; DIN EN ISO 6272 -1; DIN EN ISO 2409
DIN EN ISO 4623 -1 2019 -01; DIN EN ISO 4623 -2 2016 -12; DIN EN ISO 12944 -6 2018 -06; DIN EN ISO 12944 -9 2018 -06; DIN 55634 -1 2018 -03; DIN EN ISO 15711 2005 -03; E DIN 18219 2022 -02; TL -KOR -Stahlbauten 2021 -03; TP -KOR -Stahlbauten 2021 -03; DBS 918 300 2017 -01; DIN EN ISO 2810 2021 -01
DIN EN ISO 4628 -6; DIN EN ISO 4628 -7; DIN EN ISO 4628 -8; DIN EN ISO 4628 -10; DIN EN ISO 2811 -1; DIN EN ISO 3233 -3; DIN EN ISO 3251; DIN EN ISO 9117 -3
DIN EN ISO 16276 -2; DIN EN ISO 4624; DIN EN ISO 2813; DIN EN ISO 11664 -4; DIN EN ISO 4628 -1; DIN EN ISO 4628 -2; DIN EN ISO 4628 -3; DIN EN ISO 4628 -4; DIN EN ISO 4628 -5
DIN EN ISO 6509 -1; AS 2345; DIN EN ISO 2812 -1; DIN EN ISO 2812 -2; DIN EN ISO 2812 -3; DIN EN ISO 6270 -1; DIN EN ISO 6270 -2; DIN EN ISO 3231; DIN EN ISO 9227; DIN EN ISO 11997 -1; DIN EN 3665
DIN 50905 -2 1987 -01; DIN 50905 -3 1987 -01; DIN 50916 -2 1985 -09; ISO 6957 1988 -10; DIN 50918 2018 -09; VW 50164 2013 -06; DIN EN ISO 3451 -1 2019 -05; DIN EN 60068 -2-30 2006 -06
DIN EN ISO 4288; DIN EN ISO 8503 -4
DIN EN ISO 9117 -5; DIN EN ISO 9514; DIN EN ISO 14680 -1; DIN EN ISO 14680 -2; DIN EN ISO 16862; DIN 53211; DIN 74069; DIN EN ISO 4892 -2
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
10 lines
DAKKS
ISO/IEC 17025
ActiveD-PL-19138-01-00
Location
Labs with overlapping accredited scope in Germany
- iLF MagdeburgMagdeburg · ~193 kmDAKKSShares 5 accredited methods and materialsEN ISO 2409EN ISO 2813ISO 9227
- JR-WP Ausbildung und DienstleistungsMagdeburg · ~189 kmDAKKSShares 4 accredited methods and materialsEN ISO 2409ISO 9227Metal
- GWP Gesellschaft für Werkstoffprüfung mbHZorneding-Pöring · ~353 kmDAKKSShares 4 accredited methods and materialsEN ISO 2409EN ISO 2813Metal
- Institut für Lackprüfung Andreas KeinerWettenberg · ~362 kmDAKKSShares 4 accredited methods and materialsEN ISO 2409EN ISO 2813ISO 9227
- Entwicklungs- und Prüflabor HolztechnologieDresden · ~2 kmDAKKSShares 3 accredited methods and materialsEN ISO 2409MetalPlastics
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.