Built Environments of NC
13 Wright Street, 28401, Wilmington, NC, United States
Visit website- Accredited standards
- 24
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 24 standard numbers and the 3 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM22
ASTM C518
ASTM C1185
ASTM D1037
ASTM D1621Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D1622
ASTM D1761
ASTM D1781
ASTM D5485
ASTM D6113
ASTM E72
ASTM E283
ASTM E330
Show all 22
ASTM E331
ASTM E547
ASTM E1233
ASTM E1354
ASTM E1474
ASTM E1740
ASTM E1886
ASTM E2273
ASTM E2357
ASTM F1550
Other standards2
ISO 5660-1Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 5660-4Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 4: Measurement of heat release for determination of low levels of combustibility
ASTM C518; ASTM C1185; ASTM D1037; ASTM D1621; ASTM D1622
ASTM D1761; ASTM D1781; ASTM D5485; ASTM D6113; ASTM E72; ASTM E283/E283M; ASTM E330/E330M; ASTM E331; ASTM E547; ASTM E1233; ASTM E1354; ASTM E1474; ASTM E1740; ASTM E1886; ASTM E2273; ASTM E2357
ASTM F1550; TAS 201; TAS 202; TAS 203; CAN/ULC S-135; ISO 5660-1; ISO 5660-4
Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-10-23.
Scope as published by A2LA
4 lines
ISO/IEC 17025
Active7733.01
The scope document we hold says it is valid until 2028-05-31.
Accredited scope, certificate 7733.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM C518; ASTM C1185; ASTM D1037; ASTM D1621; ASTM D1622 | Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards; Wood-Base Fiber and Particle Panel Materials; Rigid Cellular Plastics | - |
| 2 | ASTM D1761; ASTM D1781; ASTM D5485; ASTM D6113; ASTM E72; ASTM E283/E283M; ASTM E330/E330M; ASTM E331; ASTM E547; ASTM E1233; ASTM E1354; ASTM E1474; ASTM E1740; ASTM E1886; ASTM E2273; ASTM E2357 | Wood and Wood-Based Materials; Adhesives; Insulating Materials Contained in Electrical or Optical Fiber Cables; Panels for Building Construction; Exterior Windows, Skylights, Curtain Walls, and Doors; Upholstered Furniture and Mattress Components or Composites; Wall Covering or Ceiling Covering Composites; Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies; Air Barrier Assemblies | - |
| 3 | ASTM F1550; TAS 201; TAS 202; TAS 203; CAN/ULC S-135; ISO 5660-1; ISO 5660-4 | Mattresses or Furniture for Use in Correctional Facilities; Building Materials | - |
| 4 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.