CEREMA / DTEC ITM
110 Rue de Paris, 77171, SOURDUN, France
- Accredited standards
- 98
- COFRAC certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the COFRAC scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 98 standard numbers and the 53 official names we hold. When no standard matches, it searches the method text of every scope line.
EN35
EN 932-2Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
EN 932-3
EN 1367-1
EN 1426Bitumens and bituminous binders - Determination of needle penetration
EN 1427Bitumens and bituminous binders - Determination of the softening point - Ring and Ball method
EN 1428
EN 1429
EN 1436
EN 1542
EN 1744-1Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 1767
EN 1824
Show all 35
EN 1849-1
EN 1849-2
EN 10080
EN 12190
EN 12311-1
EN 12311-2
EN 12316-2
EN 12317-2
EN 12371
EN 12593
EN 12594
EN 12607-1
EN 12697-1Bituminous mixtures - Test methods - Part 1: Soluble binder content
EN 12697-2Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
EN 12802
EN 12846-1
EN 12899-1
EN 13036-4
EN 13075-1
EN 13383-2Some clauses
Limits written next to it
naturelles NF EN 13383-2 §9
EN 13450
EN 15326
EN 17542-3
ISO20
ISO 12Aerospace - Pipelines - Identification
ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
ISO 2812-2Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
ISO 3251Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 3262-1Extenders - Specifications and methods of test - Part 1: Introduction and general test methodsSome clauses
Limits written next to it
NF EN ISO 3262-1 § 5.2
NF EN ISO 3262-1 § 5.2 /
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 6270-1Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9863-1Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
ISO 9864Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products
ISO 10319Geosynthetics - Wide-width tensile test
Show all 20
ISO 11058Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load
ISO 12236Geosynthetics - Static puncture test (CBR test)
ISO 12956Geotextiles and geotextile-related products - Determination of the characteristic opening size
ISO 12958-1Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test
ISO 13433Geosynthetics - Determination of dynamic perforation (cone drop test)
ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 17660-1Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints
ISO 19840Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
ISO 17892 series8
ISO 17892-1Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content
ISO 17892-2Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density
ISO 17892-4Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-5Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test
ISO 17892-8Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test
ISO 17892-9Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils
ISO 17892-10Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests
ISO 17892-12Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits
EN 1097 series7
EN 1097-1Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 1097-2Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-4
EN 1097-5Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-7
EN 1097-8
ISO 4628 series6
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-6Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
EN 480 series5
EN 480-5
EN 480-6
EN 480-8
EN 480-10
EN 480-12
EN 933 series5
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-3Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-6
EN 933-8Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN 933-9
EN 12350 series3
EN 12350-2Testing fresh concrete - Part 2: Slump-test
EN 12350-5
EN 12350-7Testing fresh concrete - Part 7: Air content - Pressure methods
EN 12390 series3
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-6
EN 12390-13
EN 196 series3
EN 196-1
EN 196-3Some clauses
Limits written next to it
NF EN 196-3 § 6
EN 196-6
ISO 15630 series3
ISO 15630-1Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire
ISO 15630-2Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric and lattice girders
ISO 15630-3Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
NF EN 1097-5; FD P 18 663; NF EN 932-2; NF EN 933-3; NF EN 933-6; NF EN 933-8; NF EN 933-9; NF EN 933-1; NF EN 1097-6
NF EN 932-2; NF EN 1097-5; FD P18-663; NF EN 933-3; NF EN 1097-8; NF EN 933-6; NF EN 933-8; NF EN 933-9; NF EN 933-1
NF EN 1097-7; NF EN 932-2; NF EN 933-1; NF EN 933-3; NF EN 933-6; NF EN 933-9; NF EN 1097-6
NF EN 932-2; NF EN 932-3; NF EN 933-1; P 18-560 : 1990; NF EN 933-3; NF EN 933-6; NF EN 933-8; NF EN 933-9
NF EN 1367-1; P 18-574; NF P 18-576; NF P 94-410-1; NF P 94-410-2; NF P 94-410-3; NF P 94-411; P 18-556; XP P 94-429; XP P 94-412; NF P 94-430-2
NF EN 1426; NF EN 1427; NF EN 1428; NF EN 12846-1; NF EN 1429
NF EN 1426; NF EN 1427; NF EN 1428; NF EN 12846-1; NF EN 12607-1
NF EN 12594; NF EN 15326; NF EN 12607-1; NF EN 1426; NF EN 1427; NF EN 12593
NF EN 1426; NF EN 1427; NF EN 12594; NF EN 1429; NF EN 12846-1; NF EN 13075-1
NF EN 13036-4; NF EN 1436; NF EN 1824
NF EN 1436; NF EN 1824
NF T 30-012; NF EN ISO 3251; NF EN ISO 2811-1; NF EN ISO 4628-6; NF T 34-550; NF EN ISO 4624; NF EN 1542; NF EN ISO 4628-2; NF EN ISO 4628-1
NF EN 1744-1; XP P 18-544
NF EN 1767; NF P 18-805; NF EN 12190
XP P 98-633; NF EN 12802; NF T 30-012; ISO 2811-1; NF EN 1824 (annexe C)
NF EN 1849-1; NF EN 1849-2; NF P 84-507; NF P 84-501; NF EN 12311-2; NF EN 12311-1; NF P 84-502-1; NF EN 12317-2
NF EN ISO 15630-1; NF EN ISO 6892-1 Méthode B; NF EN 10080; NF EN ISO 17660-1 AFCAB Procédure E1; NF EN ISO 15630-2
NF EN ISO 15630-2; NF EN 10080; NF 35-080-2; NF A 35-027; NF EN ISO 15630-3; NF EN ISO 6892-1 Méthode B
NF P 84-502-2; ASQUAL Géomembrane; NF EN 12316-2
NF EN 12371; NF EN 13383-2
NF EN 12697-2; NF EN 12697-1
NF P 98-533; NF EN 12899-1; XP P 98-502
MO CEREMA/PAN-M001; NF EN 12899-1; XP P 98-545
NF EN 12899-1; XP P 98-502; NF P 98-544; XP P 98-543
NF EN 933-1; NF EN 933-3; NF EN 933-9; NF EN 1097-6; NF EN 1097-2; FD P 18-663; NF EN 1097-1; NF EN 13450
NF EN 13450
NF EN ISO 17892-1; NF P 94-051; NF EN ISO 17892-4; NF EN 17542-3
NF EN ISO 4628-3; NF EN ISO 6270-1; NF EN ISO 4628-4; NF EN ISO 4628-5; ISO 19840; NF EN ISO 9227; NF EN ISO 12 944; NF EN ISO 16474-3; NF EN ISO 2812-2
MO ASCQUER/IFSTTAR/CEREMA/PMA-ME5 version n°2 du 18/03/2013; XP P 98-633:1991; NF T 30-012; ISO 2811-1; XP P 98-633 Annexe A; NF EN ISO 3262-1 § 5.2
NF EN ISO 15630-1; NF EN ISO 6892-1 Méthode B; NF EN ISO 15630-2
NF EN ISO 15630-1; NF EN ISO 15630-2; NF EN ISO 15630-3; NF EN ISO 6892-1
NF EN ISO 9863-1; NF EN ISO 9864; NF EN ISO 11058; NF EN ISO 12958-1; NF EN ISO 12956
NF EN ISO 13433; NF EN ISO 10319
NF G 38019; NF EN ISO 12236
NF EN ISO 17892-1; NF EN ISO 17892-4; NF P 94-068 : 1998
NF EN ISO 17892-1; NF EN ISO 17892-2; NF EN ISO 17892-4; MO GERM 01; NF EN ISO 17892-5; XP P 94-091; NF EN ISO 17892-8; NF EN ISO 17892-9; NF EN ISO 17892-10
NF EN ISO 17892-12; NF P 94-068; XP P 94-060-1
NF EN 1097-6; FD P 18 663; NF EN 1097-2; NF EN 1097-1
NF EN 1097-6; FD P18-663; NF EN 1097-2; NF EN 1097-1
NF EN 1097-6; NF EN 1097-4; NF EN 1097-1; NF EN 1097-2
NF P 18-579; NF EN 1097-1; NF EN 1097-2; NF EN 1097-6; NF EN 1097-8; P18-578 : 1990
NF P 18-371; NF EN 480-5
NF EN 480-8; NF EN 480-6; NF EN 480-12; NF EN 480-10; NF EN 12390-3
NF EN 480-6; NF EN 480-10; NF EN 480-12; NF EN 480-8
NF EN 12390-3; NF EN 12350-7; NF EN 12350-2
NF EN 12350-2; NF EN 12390-3
NF EN 12350-7; NF EN 12350-2; NF EN 12350-5; NF EN 12390-6; NF EN 12390-3; NF EN 12390-13
NF EN 12390-3; XP P 18-462
NF EN 196-6; NF EN 196-3; NF EN 196-1; NF EN 12390-3; NF P 18-459
NF EN 12390-3; NF P 18-459; NF EN 196-1
NF EN 12390-3
NF EN 196-1; NF EN 12390-3; NF EN 12390-6
NF EN ISO 15630-1; NF EN ISO 15630-3
NF EN ISO 15630-3; NF EN ISO 15630-1; NF EN ISO 15630-2; NF A 35-020-2-1
NF EN ISO 15630-3
Read from the COFRAC scope document we downloaded on 2026-08-05. Register refreshed 2026-10-23.
Scope as published by COFRAC
66 lines
ISO/IEC 17025
Active1-7543
The scope document we hold says it is valid until 2031-02-28.
Location
Accreditation data refreshed from the COFRAC register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the COFRAC entry linked above.