Syensqo Specialty Polymers USA, LLC.
4500 McGinnis Ferry Road, 30005, Alpharetta, GA, United States
Visit website- Accredited standards
- 32
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 32 standard numbers and the 17 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM18
ASTM D256
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of PlasticsExclusion
Limits written next to it
Microtensile Properties ASTM D638 (except Poisson’s Ratio), D1708
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D955
ASTM D1238
ASTM D3418
ASTM D3763
ASTM D3835
ASTM D5225
Show all 18
ASTM D5630
ASTM D6869
ASTM E793
ASTM E794
ASTM E831
ASTM E1131
ISO11
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 294-4Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principlesExclusion
Limits written next to it
ISO 527-1 (except Poisson’s Ratio), -2
ISO 1133Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 11359-1Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
ISO 15512Plastics - Determination of water content
ISO 11357 series3
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ASTM D256; ISO 180; ISO 179-1; ASTM D638; D1708; ISO 527-1; -2; ASTM D648; ISO 75-1; -2; ASTM D790; ISO 178; ASTM D3763; ASTM D792; ISO 1183-1; ASTM D1238; ISO 1133; ASTM D5225; D5336; ASTM D3835; ASTM D6869; ISO 15512B; ASTM D5630-13; ISO 3451-1; -4; ASTM D955; ISO 294-4; ASTM E831; ISO 11359-1; -2
ASTM E1131; ASTM D3418; ASTM E793; ISO 11357-1; ISO 11357-3; ASTM E794; ISO 11357-1; ISO 11357-2; ASTM D618
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active288.01
The scope document we hold says it was valid until 2026-07-31. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.
Accredited scope, certificate 288.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D256; ISO 180; ISO 179-1; ASTM D638; D1708; ISO 527-1; -2; ASTM D648; ISO 75-1; -2; ASTM D790; ISO 178; ASTM D3763; ASTM D792; ISO 1183-1; ASTM D1238; ISO 1133; ASTM D5225; D5336; ASTM D3835; ASTM D6869; ISO 15512B; ASTM D5630-13; ISO 3451-1; -4; ASTM D955; ISO 294-4; ASTM E831; ISO 11359-1; -2 | Plastics | - |
| 2 | ASTM E1131; ASTM D3418; ASTM E793; ISO 11357-1; ISO 11357-3; ASTM E794; ISO 11357-1; ISO 11357-2; ASTM D618 | Plastics | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
SOLVAY SPECIALTY POLYMERS USA, LLC
Alpharetta, GA
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 20th day of May 2024.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 0288.01
Valid to July 31, 2026
Revised May 28, 2024 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Advanced Composites, Inc. Ohio Facility - EngineeringSidney, OH · ~692 kmA2LAShares 3 accredited methods and materialsASTM D256ASTM D3418Plastics
- DatapointLabsIthaca, NY · ~1,149 kmA2LAShares 3 accredited methods and materialsASTM D256ASTM D3418Plastics
- Advanced Composites, Inc. Tennessee Facility - EngineeringNashville, TN · ~318 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Advanced Composites, Inc. Tennessee Facility - Main PlantNashville, TN · ~318 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
- Riverview Calibration Services,Belpre, OH · ~627 kmA2LAShares 2 accredited methods and materialsASTM D256Plastics
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.