KRAIBURG TPE GmbH & Co. KG
Friedrich-Schmidt-Straße 2, 84478, Waldkraiburg, Germany
- Accredited standards
- 26
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 26 standard numbers and the 21 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO18
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 34-2Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 48-2Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD
ISO 48-4Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)
ISO 105-B06Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 813-2Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - Part 2: Adhesion of a soft thermoplastic elastomer layer
ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
Show all 18
ISO 1407Rubber - Determination of solvent extract
ISO 2285Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
ISO 2781Rubber, vulcanized or thermoplastic - Determination of density
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 9924-3Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
DIN4
DIN 53236
DIN 53504
DIN 75200
DIN 75201
ISO 11357 series3
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
Other standards1
EN 20105-A02
ISO 37; DIN 53504; DIN ISO 34 -1; ISO 34 -2; DIN ISO 815 -1; DIN ISO 2285; DIN ISO 48 -4; DI N ISO 48 -2; DIN EN ISO 868; DIN 53236
DIN EN ISO 11357 -3; ISO 9924 -3; DIN EN ISO 11358 -1; ISO 188; DIN EN ISO 105 -B06; DIN EN ISO 4892 -2; SAE J 2412; SAE J 2527; PV 3929; PV 3930
DIN EN 20105-A02; DIN EN ISO 1133-1; VDI 2019; DIN ISO 813-2; DIN EN ISO 1183-1; ISO 2781; ISO 1407; DIN 75201; DIN EN ISO 11357-1; DIN EN ISO 11357-2
DIN 75200; 49 CFR PART 571.302
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
6 lines
ISO/IEC 17025
ActiveD-PL-22216-01-01
Accredited scope, certificate D-PL-22216-01-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
| 2 | - | plasticsShow page textExtracted from the scope document; tables may not line up. View scope for the original. Annex to the Accreditation Certificate D-PL-22216-01-01
Valid from : 13.02.2026
Date of issue : 13.02.2026 page 2 of 6
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
Tests in the fields:
Physical, mechanical-technological, environmental and fire tests of plastics
Flexible Scope of Accreditation:
The testing laboratory is permitted to use standardised or equivalent test methods listed here with
different issue dates without being required to prior inform and obtain approval from DAkkS
(flexibilization according to category A).
The testing laboratory has an up-to-date list of all test methods within the flexible scope of
accreditation. The list is publicly available on the website of the testing laboratory. | - |
| 3 | ISO 37; DIN 53504; DIN ISO 34 -1; ISO 34 -2; DIN ISO 815 -1; DIN ISO 2285; DIN ISO 48 -4; DI N ISO 48 -2; DIN EN ISO 868; DIN 53236 | Rubber, vulcanized or thermoplastic; Plastics and ebonite; Colouring materials; paint coatings | - |
| 4 | DIN EN 20105-A02; DIN EN ISO 1133-1; VDI 2019; DIN ISO 813-2; DIN EN ISO 1183-1; ISO 2781; ISO 1407; DIN 75201; DIN EN ISO 11357-1; DIN EN ISO 11357-2 | Textiles; Plastics; Thermoplastic elastomers; Rubber; Trim materials | - |
| 5 | DIN EN ISO 11357 -3; ISO 9924 -3; DIN EN ISO 11358 -1; ISO 188; DIN EN ISO 105 -B06; DIN EN ISO 4892 -2; SAE J 2412; SAE J 2527; PV 3929; PV 3930 | Plastics; Rubber and rubber products; Rubber, vulcanized or thermoplastic; Textiles; Non-metallic materials | - |
| 6 | DIN 75200; 49 CFR PART 571.302 | plastics; interior materials | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.