Registers refreshed 2026-11-08.See refresh dates
Poland

Politechnika Świętokrzyska

Al. Tysiąclecia Państwa Polskiego 7, 25-314, Kielce, Poland

PCA AB 117PCA AB 1714PCA AB 1973ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
47
PCA certificates
3
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 47 standard numbers and the 27 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC 61000 series15
IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-9Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test
IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 61000-4-13Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-4-14
IEC 61000-4-17
IEC 61000-4-27
IEC 61000-4-28
IEC 61000-4-29Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-6-1Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60598 series10
IEC 60598-2-1

Certificate says IEC 598-2-1. Probably the same standard; not checked against the EN document.

IEC 60598-2-3
IEC 60598-2-4
IEC 60598-2-5
IEC 60598-2-7
IEC 60598-2-8
IEC 60598-2-12
IEC 60598-2-13
IEC 60598-2-19
IEC 60598-2-22
ISO10
ISO 48Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 1817Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 3808-2Road vehicles - Unscreened high-tension ignition cables - Part 2: Cable classes, types, applicable tests and special requirements
ISO 4091Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements
ISO 7637-1Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Vocabulary and general considerations
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 8092-2Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Terminology, test methods and general performance requirements
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 11452-1Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
IEC 60335 series5
IEC 60335-1Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-2-3Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
IEC 60335-2-29
IEC 60335-2-30
IEC 60335-2-45
IEC3
IEC 60529Degrees of protection provided by enclosures (IP Code)
IEC 60839-10-1

Certificate says IEC 839-10-1. Probably the same standard; not checked against the EN document.

IEC 60990
IEC 60068 series3
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
Other standards1
EN 13032-1

Read from the PCA scope documents we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

16 lines
PCA

ISO/IEC 17025

Active

AB 117

The scope document we hold says it is valid until 2027-07-06.

View on PCA
PCA

ISO/IEC 17025

Active

AB 1714

The scope document we hold says it is valid until 2027-03-26.

View on PCA
PCA

ISO/IEC 17025

Active

AB 1973

View on PCA

Location

Al. Tysiąclecia Państwa Polskiego 7, Kielce, 25-314, PL

50.87980, 20.63961

Open in Maps
← All accredited testing labs in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.