GINGER CEBTP
ZAC CLÉ SAINT-PIERRE 12 AVENUE GAY LUSSAC, 78990, ELANCOURT, France
- Accredited standards
- 110
- COFRAC certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the COFRAC scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 110 standard numbers and the 41 official names we hold. When no standard matches, it searches the method text of every scope line.
EN48
EN 196-1
EN 196-3Some clauses
Limits written next to it
pâte normalisée (appareil de Vicat) NF EN 196-3 § 6
EN 356
EN 408Some clauses
Limits written next to it
NF EN 408 + A1 § 19
NF EN 408 + A1 § 9
EN 480-2
EN 480-11
EN 827
EN 1026
EN 1027
EN 1191
EN 1542
EN 1744-1Tests for chemical properties of aggregates - Part 1: Chemical analysis
Show all 48
EN 1767
EN 12046-1
EN 12152
EN 12153
EN 12154
EN 12155
EN 12179
EN 12190
EN 12192-1
EN 12207
EN 12208
EN 12210
EN 12211
EN 12400
EN 12424
EN 12425
EN 12426
EN 12427
EN 12444
EN 12445
EN 12453
EN 12489
EN 12604
EN 13049
EN 13115
EN 13116
EN 13141-1
EN 13241-1
EN 13687-1
EN 13830
EN 14019
EN 14080
EN 14351-1
EN 14449
EN 14608
EN 14609
ISO24
ISO 354Acoustics - Measurement of sound absorption in a reverberation room
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 717-1Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 2528Sheet materials - Determination of water vapour transmission rate (WVTR) - Gravimetric (dish) method
ISO 3231Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 7389Building construction - Jointing products - Determination of elastic recovery of sealants
ISO 7390Building construction - Jointing products - Determination of resistance to flow of sealants
ISO 7500-1Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
ISO 8339Building construction - Sealants - Determination of tensile properties (Extension to break)
ISO 8340Building construction - Sealants - Determination of tensile properties at maintained extension
Show all 24
ISO 9046Building and civil engineering sealants - Determination of adhesion/cohesion properties at constant temperature
ISO 9047Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 10563Building and civil engineering sealants - Determination of change in mass and volume
ISO 10590Building construction - Sealants —- Determination of tensile properties of sealants at maintained extension after immersion in water
ISO 10591Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 11431Building and civil engineering sealants - Determination of adhesion and cohesion properties of sealants after exposure to heat, water and artificial light through glass
ISO 11432Building and civil engineering sealants - Determination of resistance to compression
ISO 11600Building construction - Jointing products - Classification and requirements for sealants
ISO 11654Acoustics - Sound absorbers for use in buildings - Rating of sound absorption
ISO 12543-4Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability
NF7
NF P15-433
NF P18-805
NF P18-807
NF P20-302
NF P20-501
NF P30-303
NF P85-701
EN 15651 series4
EN 15651-1
EN 15651-2
EN 15651-3
EN 15651-4
EN 933 series4
EN 933-1Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-3Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-8Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN 933-9
ISO 10140 series4
ISO 10140-1Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products
ISO 10140-2Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation
ISO 10140-4Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
ISO 10140-5Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment
EN 1097 series3
EN 1097-1Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 1097-2Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-6Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 12350 series3
EN 12350-2Testing fresh concrete - Part 2: Slump-test
EN 12350-5
EN 12350-7Testing fresh concrete - Part 7: Air content - Pressure methods
EN 12390 series3
EN 12390-3Testing hardened concrete - Part 3: Compressive strength of test specimens
EN 12390-4
EN 12390-6
EN 1279 series3
EN 1279-2
EN 1279-4
EN 1279-5
EN 1793 series3
EN 1793-1
EN 1793-2
EN 1793-3
ISO 7724 series3
ISO 7724-1Paints and varnishes - Colorimetry - Part 1: Principles
ISO 7724-2Paints and varnishes - Colorimetry - Part 2: Colour measurement
ISO 7724-3Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences
Other standards1
ASTM C457
NF EN 12390-3; NF EN 12390-6; NF EN 12350-7; NF EN 12350-2; NF EN 12350-5; NF EN 196-3; NF EN 196-1; NF EN 480-2; NF P 15-433
NF EN 12604; NF EN 13241-1; NF EN 12453; NF EN 12445; NF EN 12155; NF EN 12153; NF EN 12179; NF EN 13049; NF EN 356; NF EN 12154; NF EN 13830; NF EN 12152; NF EN 13116; NF EN 14019; NF EN 14449
NF EN 1542; NF EN 13687-1; NF EN 12192-1; NF EN 12190; NF EN 408 + A1 § 19; NF EN 14080 (conditionnement des éprouvettes) : Annexe F.2; NF EN 408 + A1 § 9; NF EN 14080 (conditionnement des éprouvettes) : Annexe F.2
ASTM C 457; NF EN 480-11
NF P 18-805; NF P 18-807; NF EN 827; NF EN 1767; Méthode interne ELAN IMAT I12
NF EN 1027; NF EN 12208; NF P 20-501; NF EN 14351-1; NF EN 1026; NF EN 12207; NF EN 12211; NF EN 12210; NF P20-501; NF EN 1191; NF P20-302; NF EN 12400
NF EN 1744-1; NF EN 933-9
NF EN 14608; NF EN 13115; NF EN 14351-1; NF EN 12046-1; NF P 20-501; NF EN 14609; NF P 20-302; NF EN 12489; NF EN 12425; NF EN 13241-1; NF EN 12427; NF EN 12426; NF EN 12444; NF EN 12424
NF EN ISO 10140-1; NF EN ISO 10140-2; NF EN ISO 10140-4; NF EN ISO 10140-5; NF EN ISO 717-1; NF EN ISO 354; NF EN ISO 11654; NF EN 1793-1; NF EN 1793-3; NF EN 1793-2; NF EN 13141-1
NF EN 13141-1
ETAG n°002 §5.1.4.6.2; NF EN ISO 7389; ETAG n°002 §5.1.4.6.4; ETAG n°002 §5.1.4.6.5; ETAG n°002 §5.1.4.6.7; NF EN ISO 527-3; ETAG 002 §5.1.4.1.1; NF EN ISO 8339; ETAG 002 §5.1.4.1.2; NF EN ISO 8339; ETAG 002 §5.1.4.2.1; ETAG 002 §5.1.4.2.2; NF EN ISO 9227; ETAG 002 §5.1.4.2.3; NF EN ISO 3231
NF P30 303; NF P85 512; NF P85 513; NF P 30-303; NF EN ISO 7390; NF P85 700; EN ISO 1183-1; NF P 85-701; NF EN ISO 11358-1; NF EN ISO 10563; NF EN ISO 868; EN 15651-1; EN 15651-2; EN 15651-3; EN 15651-4
NF EN ISO 2528; NF EN ISO 1183-1; NF EN ISO 11358-1; NF EN ISO 10563; NF EN ISO 7724-1 : 1988; NF EN ISO 7724-2 : 1988; NF EN ISO 7724-3 : 1988; ETAG n°002 §5.2.1.1; ETAG n°002 §5.2.1.3; ETAG n°002 §5.1.4.6.1; ETAG n°002 § 5.1.4.6.3; ETAG n°002 §5.2.1.4
NF P30 303; NF P85 527; NF P85 528; NF EN ISO 7389; EN 15651-1; EN 15651-2; EN 15651-3; EN 15651-4; NF EN ISO 8339; NF EN ISO 8340; ISO 11600
NF EN 12390-4; NF EN ISO 7500-1
NF EN ISO 9046; NF EN ISO 9047; NF EN ISO 10590; NF EN ISO 10591; NF EN ISO 11431; NF EN ISO 11432; EN 15651-1; EN 15651-2; EN 15651-3; EN 15651-4; ISO 11600
NF EN ISO 9227; Référentiel Qualimarine; Référentiel Qualilaquage § 3.5.1; Méthode interne ELAN-A-I-01
NF EN ISO 12543-4
NF EN 933-3; NF EN 933-8; NF EN 933-1; NF EN 1097-6; NF EN 1097-2; NF EN 1097-1
NF EN 1279-2; NF EN 1279-5; NF EN 1279-4; CEKAL Pvi 131vi01; CEKAL Pvi 131vi02; CEKAL Pvi 131vi031; CEKAL Pvi 131vi032
Read from the COFRAC scope document we downloaded on 2026-02-12. Register refreshed 2026-11-06.
Scope as published by COFRAC
24 lines
ISO/IEC 17025
Active1-0002
The scope document we hold says it is valid until 2027-09-30.
Location
Labs with overlapping accredited scope in France
- CERIBEPERNON · ~27 kmCOFRACShares 2 accredited methods and materialsEN 933-3Granulates
- BUREAU VERITAS LABORATOIRES CERGYCERGY · ~32 kmCOFRACShares 2 accredited methods and materialsISO 9227Metal
- CRITT MATÉRIAUX INNOVATION - CHARLEVILLE-MÉZIÈRESCHARLEVILLE-MEZIERES · ~230 kmCOFRACShares 2 accredited methods and materialsISO 1183-1Metal
- RESCOLL - ROCHEFORTROCHEFORT · ~384 kmCOFRACShares 2 accredited methods and materialsISO 9227Metal
- LABORATOIRES POURQUERYLYON 7EME · ~402 kmCOFRACShares 2 accredited methods and materialsISO 9227Metal
Accreditation data refreshed from the COFRAC register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the COFRAC entry linked above.