Fabris Lane
3rd Floor, No. 177, Yaohua Road Louqiao, Ouhai District, Wenzhou, People's Republic of China, Wenzhou, China
Visit website- Accredited standards
- 5
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 5 standard numbers and the 3 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM F963
EN 14139
ISO 12312-1Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use
ISO 12870Ophthalmic optics - Spectacle frames - Requirements and test methods
ISO 16034Ophthalmic optics - Specifications for single-vision ready-to-wear near- vision spectacles+1 national
National versions in the same scope
AS/NZS ISO 16034probably the same standard; matched by number only
AS/NZS 1067.1; AS 1067.1; ASTM F963 Part 4.9; 16 CFR 1500.48; EN71-1 Section 8.12; ASTM F963 Part 4.7; 16 CFR 1500.49; EN71-1 Section 8.11
ISO 12312-1; EN ISO 12312-1; BS EN ISO 12312-1; ANSI Z80.31; EN 14139; BS EN 14139; ISO 16034; AS/NZS ISO 16034
ANSI Z80.3; ANSI Z80.31; ISO 12312-1; EN ISO 12312-1; BS EN ISO 12312-1
ISO 16034; AS/NZS ISO 16034; ISO 12870; EN ISO 12870; BS EN ISO 12870; AS/NZS 1067.1; AS 1067.1
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
6 lines
ISO/IEC 17025
Active3387.05
The scope document we hold says it is valid until 2027-12-31.
Accredited scope, certificate 3387.05
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ANSI Z80.3; ANSI Z80.31; ISO/IEC 17025:2017 | eyewear and face protectors | - |
| 2 | ANSI Z80.3; ANSI Z80.31; ISO 12312-1; EN ISO 12312-1; BS EN ISO 12312-1 | Lens Types | - |
| 3 | ISO 12312-1; EN ISO 12312-1; BS EN ISO 12312-1; ANSI Z80.31; EN 14139; BS EN 14139; ISO 16034; AS/NZS ISO 16034 | - | - |
| 4 | ISO 16034; AS/NZS ISO 16034; ISO 12870; EN ISO 12870; BS EN ISO 12870; AS/NZS 1067.1; AS 1067.1 | - | - |
| 5 | AS/NZS 1067.1; AS 1067.1; ASTM F963 Part 4.9; 16 CFR 1500.48; EN71-1 Section 8.12; ASTM F963 Part 4.7; 16 CFR 1500.49; EN71-1 Section 8.11 | - | - |
| 6 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
FABRIS LANE LTD
Wenzhou Zhejiang, CHINA
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 30th day of September 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 3387.05
Valid to December 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.