Registers refreshed 2026-11-08.See refresh dates
Germany

Leichtbau - Zentrum Sachsen

Marschnerstraße 39, 01307, Dresden, Germany

DAKKS D-PL-11175-01-00DAKKS D-PL-11175-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
10
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 10 standard numbers and the 9 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 2564
ISO 178Plastics - Determination of flexural properties
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 1172Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14129Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

6 lines
DAKKS

ISO/IEC 17025

Active

D-PL-11175-01-00

View scope

Accredited scope, certificate D-PL-11175-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO 178; DIN EN ISO 527 -1; DIN EN ISO 527 -2; DIN EN ISO 527 -4; DIN EN ISO 527 -5; DIN EN ISO 14125; DIN EN ISO 14129; DIN EN 2564; DIN EN ISO 1172; DIN EN ISO 1183 -1Plastics-
3DIN; EN; IEC; ISO--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-11175-01-01

View scope

Accredited scope, certificate D-PL-11175-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2-Kunststoffen
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

Anlage zur Akkreditierungsurkunde D-PL-11175-01-01 Gültig ab: 30.01.2025 Ausstellungsdatum: 17.06.2026 Seite 2 von 3 Prüfungen in den Bereichen: mechanisch-technologische Prüfungen von Kunststoffen Flexibler Akkreditierungsbereich: Dem Prüflaboratorium ist, ohne dass es einer vorherigen Information und Zustimmung der DAkkS bedarf, die Anwendung der hier aufgeführten genormten oder ihnen gleichzusetzenden Prüfverfahren mit unterschiedlichen Ausgabeständen gestattet (Flexibilisierung nach Kategorie A). Das Prüflaboratorium verfügt über eine aktuelle Liste aller Prüfverfahren im flexiblen Akkreditierungsbereich. Die Liste ist öffentlich verfügbar auf der Webpräsenz des Prüflaboratoriums.
-
3DIN EN ISO 178; DIN EN ISO 527-1; DIN EN ISO 527-2; DIN EN ISO 527-4; DIN EN ISO 527-5; DIN EN ISO 14125; DIN EN ISO 14129; DIN EN 2564; DIN EN ISO 1172; DIN EN ISO 1183-1Kunststoffe; Faserverstärkte Kunststoffe; Kohlenstofffaser-Laminate; Textilglasverstärkte Kunststoffe; Prepregs, Formmassen und Laminate-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Marschnerstraße 39, Dresden, 01307, DE

51.05162, 13.75943

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.