Universität Duisburg-Essen Institut für Metall- und Leichtbau
Universitätsstraße 15, 45141, Essen, Germany
- Accredited standards
- 11
- DAKKS certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 11 standard numbers and the 7 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO7
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 898-1Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
ISO 1421Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
ISO 3506-1Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 16047Fasteners - Torque/clamp force testing
EN4
EN 1090-2
EN 14399-2
EN 15048-2
EN 17117-1
DIN EN 17117-1; DIN EN ISO 527-1; DIN EN ISO 527-3; DIN EN ISO 1421
DIN EN 1090-2; DIN EN 14399-2; DIN EN ISO 16047; DIN EN ISO 6892-1; DIN EN ISO 898-1; DIN EN 15048-2; DIN EN ISO 3506-1
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
3 lines
ISO/IEC 17025
ActiveD-PL-21613-01-00
Accredited scope, certificate D-PL-21613-01-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001 | materials and components made of metals, plastics and coated textiles; fasteners made of metal | - |
| 2 | DIN EN 1090-2; DIN EN 14399-2; DIN EN ISO 16047; DIN EN ISO 6892-1; DIN EN ISO 898-1; DIN EN 15048-2; DIN EN ISO 3506-1 | Metal | - |
| 3 | DIN EN 17117-1; DIN EN ISO 527-1; DIN EN ISO 527-3; DIN EN ISO 1421 | Plastics | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Germany
- Kiwa GmbHBerlin · ~453 kmDAKKSShares 4 accredited methods and materialsEN ISO 9001ISO 6892-1Metal
- GWP Gesellschaft für Werkstoffprüfung mbHZorneding-Pöring · ~510 kmDAKKSShares 4 accredited methods and materialsEN ISO 9001ISO 6892-1Metal
- Techno LaborBottrop · ~7 kmDAKKSShares 3 accredited methods and materialsEN ISO 9001ISO 6892-1Metal
- Verein des Hygiene-Instituts des Ruhrgebiets e.V. Hygiene-Institut des Ruhrgebiets Institut für Umwelthygiene und ToxikologieGelsenkirchen · ~8 kmDAKKSShares 3 accredited methods and materialsEN ISO 9001MetalPlastics
- UL International Germany GmbH Standort KrefeldKrefeld · ~26 kmDAKKSShares 3 accredited methods and materialsEN ISO 9001ISO 527-1Plastics
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.