Formosa Plastics Corporation, Texas
201 Formosa Drive, P.O. Box 700, 77978, Point Comfort, TX, United States
Visit website- Accredited standards
- 17
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 17 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.
ISO11
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 178Plastics - Determination of flexural properties
ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
ISO 180Plastics - Determination of Izod impact strength
ISO 291Plastics - Standard atmospheres for conditioning and testing
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ASTM6
ASTM D256
ASTM D618
ASTM D638Standard Test Method for Tensile Properties of PlasticsExclusion
Limits written next to it
Tensile Properties (Except Poisson’s Ratio) ASTM D638
ASTM D648
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D1238
ASTM D256; ISO 180; ASTM D618; ISO 291; ASTM D638; ISO 527-1; ISO 527-2; ASTM D648; ISO 75-1; ISO 75-2; ASTM D790; ISO 178; ASTM D1238; ISO 1133-1; ISO 179-1; ISO 868; ISO 1183-1
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
2 lines
ISO/IEC 17025
Active2482.01
The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.
Accredited scope, certificate 2482.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D256; ISO 180; ASTM D618; ISO 291; ASTM D638; ISO 527-1; ISO 527-2; ASTM D648; ISO 75-1; ISO 75-2; ASTM D790; ISO 178; ASTM D1238; ISO 1133-1; ISO 179-1; ISO 868; ISO 1183-1 | polyolefins | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
FORMOSA PLASTICS CORPORATION, TEXAS
Point Comfort, TX
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 23rd day of September 2024.
__ _____________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 2482.01
Valid to September 30, 2026 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Advanced Composites, Inc. Tennessee Facility - EngineeringNashville, TN · ~1,235 kmA2LAShares 1 accredited test methodASTM D256
- Advanced Composites, Inc. Tennessee Facility - Main PlantNashville, TN · ~1,235 kmA2LAShares 1 accredited test methodASTM D256
- Advanced Composites, Inc. Ohio Facility - EngineeringSidney, OH · ~1,716 kmA2LAShares 1 accredited test methodASTM D256
- Riverview Calibration Services,Belpre, OH · ~1,811 kmA2LAShares 1 accredited test methodASTM D256
- Applus Reliable AnalysisMadison Heights, MI · ~1,958 kmA2LAShares 1 accredited test methodASTM D256
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.