Registers refreshed 2026-11-08.See refresh dates
Poland

Firma Produkcyjno-Usługowa INBUL Spółka z o.o.

Migi 3, 83-340, Sierakowice, Poland

PCA AB 1505ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
28
PCA certificate
1
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 28 standard numbers and the 27 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO18
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 4136Destructive tests on welds in metallic materials - Transverse tensile test
ISO 5173Destructive tests on welds in metallic materials - Bend tests
ISO 5178Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7438Metallic materials - Bend test
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
Show all 18
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 16811Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17639Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
EN6
EN 1321
EN 1369Founding - Magnetic particle testing
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 12680-1Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 13018Non-destructive testing - Visual testing - General principles
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

3 lines
PCA

ISO/IEC 17025

Active

AB 1505

The scope document we hold says it was valid until 2026-04-10. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-03-13. Check the PCA register for the current scope.

View on PCA

Accredited scope, certificate AB 1505

LineMethodMatrixRange
1-construction products and materials – including metals
Show page text

Extracted from the scope document; tables may not line up. View scope for the original.

PCA Zakres akredytacji Nr AB 1505 Scope of accreditation No. AB 1505 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No. AB 1505 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 17 z/of 20.03.2025 KIEROWNIK DZIAŁU AKREDYTACJI BADAŃ MECHANICZNYCH I FIZYCZNYCH MARIA SZAFRAN Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 1505 z dnia 10.01.2023 r. Cykl akredytacji od 16.03.2022 r. do 10.04.2026 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No. AB 1505 of 10.01.2023 Accreditation cycle from 16.03.2022 to 10.04.2026 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No. 17, 20.03.2025 1/4 Nazwa i adres / Name and address Firma Produkcyjno-Usługowa INBUL Spółka z o.o. Laboratorium Badań Nieniszczących i Mechanicznych Migi 3 83-340 Sierakowice Kod identyfikacyjny / Identification code *) Dziedzina i przedmiot badań / Field of testing and item: - J/8 - Badania mechaniczne, badania metalograficzne wyrobów i materiałów konstrukcyjnych – w tym metali/ Mechanical tests, metallographic tests of construction products and materials – including metals - L/8 - Badania nieniszczące wyrobów i materiałów k onstrukcyjnych – w tym metali/ Non-destructive tests of construction products and materials – including metals Wersja strony/Page version: A *) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl / The identification code according to the Annex to document DAB -07, available at PCA website www.pca.gov.pl AB 1505
-
2PN-EN 13018:2016-04; PN-EN ISO 17637:2017-02; PN-EN ISO 3452-1:2021-12; PN-EN 1371-1:2012; PN-EN 10228-2:2016-07; PN-EN ISO 9934-1:2017-02; PN-EN 1369:2013-04; PN-EN 10228-1:2016-07; PN-EN ISO 17638:2017-01; PN-EN ISO 16810:2014-06; PN-EN ISO 16811:2014-06; PN-EN ISO 17640:2019-01; PN-EN 10160:2001; PN-EN 10228-3:2016-07; PN-EN 10228-4:2016-07; PN-EN 12680-1:2005Wyroby i materiały metalowe; Złącza spawane materiałów metalowych; Odlewy; Odkuwki stalowe; Wyroby i materiały metalowe ferromagnetyczne; Odlewy z ferromagnetycznego żeliwa i staliwa; Złącza spawane materiałów i wyrobów ferromagnetycznych; Złącza spawane materiałów i wyrobów metalowych; Wyroby stalowe płaskie; Odlewy staliwne-
3PN-EN ISO 6892-1:2020-05; PN-EN ISO 6506-1:2008; PN-EN ISO 6506-1:2014-12; PN-EN ISO 148-1:2017-02; PN-EN ISO 6508-1:2024-06; PN-EN ISO 7438:2021-04; PN-EN ISO 6507-1:2024-04; PN-EN 1321:2000; PN-EN ISO 17639:2022-07; PN-EN ISO 5173:2010; PN-EN ISO 9016:2022-09; PN-EN ISO 4136:2022-12; PN-EN ISO 5178:2019-04Materiały i wyroby konstrukcyjne; Materiały hutnicze; Złącza spawane materiałów i wyrobów metalowychto 500 kN

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Migi 3, Sierakowice, 83-340, PL

54.34519, 17.89356

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.